Question about 2002 Mercedes-Benz C-Class

1 Answer

Cigarette lighter 2002 C240, no voltage, fuse ok pins bent back out, How to replace

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Ok just to confirm that you have actually found the fuse? Under the bonnet by the wiper, right at the back of the fuse box - blue 15 Amp, nearest windscreen and to the right, it is well hidden.
If that is OK, then I’m amazed that just the pins bent on the lighter body will result in no voltage. I’m assuming that you have used a meter with the ign switch on.
If you have the change the cigar lighter, then you will need to take up the panel. From memory, the ash tray needs to be pulled out first......
Try doing a search on a mercedesclub.org.uk, they will have someone willing to help.

Posted on Sep 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power to cigarette lighter,2011 lexus es 350. checked fuses ,they are ok.


Use a D C tester and check for voltage it could be a bad lighter. if that dose not work take your voltage tester and put one lead in the lighter hole on the center and ground the other lead to the metal on the car check for voltage. You may have a bad ground.

Sep 28, 2014 | 2011 Lexus ES 350

2 Answers

Cigarette lighter socket came out, no charging


You probably pulled the wiring plug off the back of the socket. Or the fuse went when the socket came out.

Mar 05, 2014 | 2002 Toyota Camry

1 Answer

2002 Cadillac DTS- cigarette lighters don't work - fuses OK


The lighter it self is a coil they will burn out. very inexpensive to replace.
But if they all went out at the same time then that's a different issue

Jul 07, 2012 | 2006 Cadillac DTS

2 Answers

I HAVE NO POWER IN THE DLC ON A 2002 ALERO HOW DO I FIGURE OUT HOW TO GET THE POWER RUNNING TO IT


Below is a diagram of the DLC connector pins and what they do, check that pin 16 is always hot with 12 volts. If no voltage is present check the fuse for the cigar lighter or interior lights.2_11_2012_12_30_25_am.gif

Feb 10, 2012 | Cars & Trucks

1 Answer

Cigarette lighter aren't working in 2002 pt cruiser


Usually a 30 amp fuse is the culprit in this case.
Fuse is usually under the dash.

If fuse is good...then, I'd check the back of lighter socket to see if we have voltage.
If we do...then you have bad element in lighter itself.

Hope this helps...

Jul 23, 2011 | 2002 Chrysler PT Cruiser

1 Answer

Cigarette lighter doesn't work.  Tried replacing fuse, but fuse is ok.  How do you remove the front centre dashbaord panel to gain access to cigarette lighter wiring on a 2005 Jeep cherokee ?


before u pull panel, check for 12vdc with voltmeter inside lighter socket. If u have it, then clean contacts and/or replace lighter(not socket, wiring is fine) May save a lot of work. If you don't have voltage are you 100% sure you have right fuse and not the one below, above, or next to it? I still make mistakes with numbered fuses, which number is for which fuse. To make sure I start counting at 1.

Sep 26, 2009 | Jeep Cherokee Cars & Trucks

1 Answer

Charger through cigarette lighter will not work, fuse seems ok


First using multimeter check if there's voltage at the cigarette lighter slot as if there is then the problem is in charger, otherwise check for continuity of Cigarette lighter wiring

Jun 29, 2009 | 2002 Ford Explorer

1 Answer

Cigarette lighter stop working, i cheked the fuse and its ok, so please tell me should i do next


check to see if there is voltage going to the lighter itself. you can use a voltmeter for this or a 12v test light (really cheap). if there is no voltage while the vehicle is running--you need to replace the lighter. if there is no voltage at the lighter--check to see if there is voltage at the fuse. if not--i'd recommend rewiring it or figuring out where the break is.

Jun 13, 2009 | 2002 Toyota Camry

1 Answer

Cigarette lighter won't work fuse ok lighter base ok


I would put a red volt meter lead on the middle and a the black lead on the outside. If it checks above 12 vols, the lighter itself is bad. If no voltage is present, you have to check all the positive wires back to the battery. If those are all working, you have a bad ground.

Jun 08, 2009 | 2005 Ford Focus

1 Answer

Cigarrette lighter (front) in 2002 ford explorer


Hi Rudy

You will have to inspect the cigarette lighter closely, I suspect your son has bent the 2 terminals that make contact with the lighter, and this will continually giving you a dead short and blow your new fuse.
As for the other problem, your idea of shrink insulation sounds perfect.

Good Luck !
John.

Jan 15, 2009 | 2002 Ford Explorer

Not finding what you are looking for?
2002 Mercedes-Benz C-Class Logo

706 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...