Question about 1999 Volkswagen Cabrio

1 Answer

What is the housing called where upper radiator hose connects to right side of cylinder head?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

Thermostat housing.

Posted on Sep 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where Is thermostat located on 1994 escort 1.9 motor


On almost all cars if you follow the upper radiator hose to where it goes into the motor, that is where the termostate is.

Jan 15, 2011 | Ford Escort Cars & Trucks

2 Answers

Where is the thermostat ?


Please see my tip at http://www.fixya.com/cars/r5929960-s_thermostat . These are generic instructions. Specific instructions are provided below. If you get stuck, please get back to me.

jturcotte_209.gif

  1. Disconnect the negative battery cable. Drain the radiator to below the level of the thermostat.
  2. If necessary, remove the air cleaner assembly.
  3. If necessary, disconnect the coolant temperature switch at the thermostat housing.
  1. Remove the upper radiator hose.
  2. Remove the mounting nuts, thermostat housing, thermostat and gasket.

Do not pry the housing off.
To install:
  1. Clean the thermostat housing and the cylinder head mating surfaces.
  2. Insert the thermostat into the rear cylinder head housing with the jiggle pin at the top. The spring side of the thermostat should face the housing.
  3. Position a new gasket onto the studs with the seal print side facing the rear cylinder housing.
  4. Install the thermostat housing and 2 nuts. Tighten the nuts to 14-22 ft. lbs. (19-5 Nm).
  5. Install the upper radiator hose.
  6. If detached, connect the coolant temperature switch.
  7. If removed, install the air cleaner housing.
  8. Fill the cooling system. Connect the negative battery cable, start the engine and check for leaks. Check the coolant level and add coolant, as necessary.

Nov 19, 2010 | 1994 Mazda MX-3

1 Answer

How to replace thermostat on 1998 Maza b2500


I have generic instructions here: http://www.fixya.com/cars/r5929960-s_thermostat

Specific instructions from autozone.com are below

2.5L Engine
  1. Disconnect the negative battery cable.
  2. Drain the cooling system.



CAUTION When draining the coolant, keep in mind that cats and dogs are attracted by ethylene glycol antifreeze, and are quite likely to drink any that is left in an uncovered container or in puddles on the ground. This will prove fatal in sufficient quantity. Always drain the coolant into a sealable container. Coolant should be reused unless it is contaminated or several years old.

  1. Disconnect the heater return hose at the thermostat housing.
  2. Disengage the ECT sensor and engine coolant temperature sender wiring connectors.
  3. Disconnect the upper radiator hose from the thermostat housing connection.
  4. Loosen the mounting bolts and remove the housing from the cylinder head.
  5. Remove the thermostat and gasket from the housing.
  6. Clean both thermostat gasket mating surfaces.

To install:
  1. Position the thermostat gasket properly onto the housing. The gasket must be in place before the thermostat is installed.
  2. Install the thermostat into the housing by first turning and then locking into the recess of the housing.
  3. Position the thermostat and housing onto the mating surface of the cylinder head. Install and tighten the retaining bolts to 14-21 ft. lbs. (20-30 Nm).
  4. Connect the upper radiator hose to the thermostat housing connection.
  5. Connect the ECT sensor and engine coolant temperature sender wiring harnesses.
  6. Connect the heater return hose to the thermostat housing.
  7. Connect the negative battery cable.
  8. Fill the radiator and operate the engine until it reaches operating temperature. Check the coolant level and adjust as necessary.

Sep 27, 2010 | 1998 Mazda Pickup

2 Answers

Where is the thermostat?


usually is located under the goose neck that the upper radiator hose is attached on the engine. but different engines have aother locations, like at the lower radiator hose where it connects to water pump. try the upper hose first.

Sep 04, 2010 | 1990 Plymouth Acclaim

1 Answer

How to replace a thermostat 1996 mazda mellinia


Thermostat - REMOVAL & INSTALLATION

CAUTION When draining the coolant, keep in mind that cats and dogs are attracted by the ethylene glycol antifreeze, and are quite likely to drink any that is left in an uncovered container or in puddles on the ground. This will prove fatal in sufficient quantity. Always drain the coolant into a sealable container. Coolant should be reused unless it is contaminated or several years old.
1.5L, 1.6L, 1.8L (except K8) and 2.2L Engines
  1. Disconnect the negative battery cable. Drain the radiator to below the level of the thermostat.
  2. If necessary, remove the air cleaner assembly.
  3. If necessary, disconnect the coolant temperature switch at the thermostat housing.
  1. Remove the upper radiator hose.
  2. Remove the mounting nuts, thermostat housing, thermostat and gasket.
Do not pry the housing off.


To install:
  1. Clean the thermostat housing and the cylinder head mating surfaces.
  2. Insert the thermostat into the rear cylinder head housing with the jiggle pin at the top. The spring side of the thermostat should face the housing.
  3. Position a new gasket onto the studs with the seal print side facing the rear cylinder housing.
  4. Install the thermostat housing and 2 nuts. Tighten the nuts to 14-22 ft. lbs. (19-5 Nm).
  5. Install the upper radiator hose.
  6. If detached, connect the coolant temperature switch.
  7. If removed, install the air cleaner housing.
  8. Fill the cooling system. Connect the negative battery cable, start the engine and check for leaks. Check the coolant level and add coolant, as necessary.


2.0L Engine
See Figures 3, 4, 5, 6, 7, 8, 9 and 10
  1. Disconnect the negative battery cable.
  2. Drain the engine coolant from the radiator to below the level of the thermostat.
  1. Disconnect the lower radiator hose from the engine.
  2. Remove the housing bolts, thermostat housing, thermostat and gasket.
Do not pry the housing off.


To install:
  1. Clean the thermostat housing and the cylinder head mating surfaces.
  2. Make sure that the thermostat jiggle pin is aligned with the gasket projection.
  3. Install the thermostat to the housing. Align the gasket projection with the opening in the housing. The spring side of the thermostat should face into the housing.
  4. Install the thermostat housing cover and tighten both bolts to 14-19 ft. lbs. (19-25 Nm).
  5. Fill the cooling system. Connect the negative battery cable, start the engine and check for leaks. Check the coolant level and add coolant, as necessary.

Hope helps (remember rated this).

Jul 08, 2010 | 1996 Mazda Millenia

1 Answer

Cylinder head removal on 2005 nissan altima 2.5 engine would like to know how to remove the camshaft to remove the head bolts


CYLINDER HEAD REMOVAL

2.5L Engines
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Drain cooling system and engine oil.
  3. Relieve the fuel system pressure.
  4. Remove or disconnect the following:
    • Negative battery cable
    • Upper radiator hose and heater hose
    • Right side fuse/relay box and move aside
    • Engine undercover
    • Resonator and air cleaner case
    • Engine top cover
    • All electrical and vacuum lines at the head
    • Fuse hose quick connector at fuel tube side
    • Engine harness and power steering hose bracket
    • Timing chain
    • Drive belt tensioner
    • Camshafts
    • Spark plugs
    • Exhaust manifold
  5. Support the engine from above and below with a suitable jack and hoist.
  6. Remove or disconnect the following:
    • Power steering pump and reservoir and wire aside
    • Auxiliary drive belts
    • A/C compressor and wire aside
    • Upper sway bar links
    • Front and rear engine mount through bolts
    • Lower ball joints
    • 2 steering gear housing mounting bolts
    • Front suspension member bolts and front suspension member
  7. Loosen the cylinder head bolts in the sequence shown and remove the cylinder head.
d365038.gif
Removing the front suspension member—Altima

7555308.gif
Cylinder head bolt removal sequence—2.5L engine–Altima and Sentra

1e6ce81.gif
Cylinder head bolt tightening sequence—2.5L engine–Altima and Sentra

To install:
  1. Clean the gasket surfaces.
  2. Using new head gaskets, install the cylinder heads.
    NOTE If possible, replacement of the head bolts is suggested.

  3. If replacement of the head bolts is not possible, perform the following bolt measurement:
    • Measure the diameter of the head bolt 0.43 in. (11mm) from the bottom of the bolt.
    • Measure the diameter of the head bolt 2.17 in. (55mm) from the bottom of the bolt.
    • Whenever the size difference between the 2 measurements exceeds 0.0091 in. (0.23mm) the head bolts must be replaced.
  4. Apply clean engine oil to the bolt threads and seating surfaces and tighten the cylinder head bolts in sequence as follows:
    • Step 1: 72 ft. lbs. (98 Nm).
    • Step 2: Loosen all the bolts completely.
    • Step 2: 29 ft. lbs. (33 Nm).
    • Step 4: Plus 75–80 degrees clockwise.
    • Step 5: Plus 75–80 degrees clockwise.
  5. Install the front suspension member and tighten the bolts to the specifications shown in the illustration.
  6. Install or connect the following:
    • 2 steering gear housing mounting bolts
    • Lower ball joints
    • Front and rear engine mount through bolts
    • Upper sway bar links
    • A/C compressor
    • Auxiliary drive belts
    • Power steering pump and reservoir
    • Exhaust manifold
    • Spark plugs
    • Camshafts
    • Drive belt tensioner
    • Timing chain
    • Engine harness and power steering hose bracket
    • Fuse hose quick connector at fuel tube side
    • All electrical and vacuum lines at the head
    • Engine top cover
    • Resonator and air cleaner case
    • Engine undercover
    • Right side fuse/relay box and move aside
    • Upper radiator hose and heater hose
    • Negative battery cable
  7. Fill the cooling system and engine oil
  8. Start the vehicle, check for leaks and repair if necessary.

Nov 13, 2009 | 2005 Nissan Altima

1 Answer

Kia rio 2001 thermostat


Fallow the "UPPER" Radiator Hose from the Radiator to the Engine Cylinder Head, The Thermostat Housing is the Unit that the UPPER Radiator Hose Connects to. Theres is 1 BOLT (TOP) & 1 NUT (BOTTOM) that you Remove to Gain Access to the Thermostat itself. Hoping this Helps you out There . Have A Great Day.

Jan 21, 2009 | 2001 Kia Rio

3 Answers

Thermostat location 1995 jeep grand cher. straight 6


Thermostat is located on 4.0L I-6 on front cylinder head. The 3.7L V-6 thermostat is located where the lower radiator hose attaches to engine. The 4.7L V-8 thermostat is located where the lower radiator hose attaches to engine. The 5.7L V-8 thermostat is located where the upper radiator hose attaches to engine. The 3.9L V-6 and 5.9L V-8 Thermostat is located on front top of intake manfold (between alternator and ac compressor)

Jul 31, 2008 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
1999 Volkswagen Cabrio Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76051 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...