Question about 1999 Chevrolet Silverado 1500

1 Answer

2004 Silverado 1500, Stuck in 4-wheel mode. Lights on dash flash when i push 2-wheel button, but nothing happens. What's up with this?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

There is a shifter motor that shifts it in and out of 4x4 when you push the button. many of these motors have gone bad.

Posted on Oct 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stuck in 4 hi , changed the buttons on dash, changed transfer case shift motor lights on 2 hi flash but then it goes back to 4 hi any help ?


check the transfer case switch on top of transfer case.they sometime get stuck.if that is not the problem i would say it is your tansfer case control module.

Feb 10, 2011 | 2000 Chevrolet Silverado 1500

2 Answers

2004 chevy silverado 1500 4 wheel drive wont work..


try selecting from nutreul or less then 3km

Feb 02, 2010 | 2003 GMC Sierra

1 Answer

2004 silverado 4 wheel drive does not work, 4 wheel high button remains lit, will not change to any other button


1. Inspect Transfer Case Control Module (TCCM) and encoder/motor wiring, terminal contact, grounds.

2. Install updated TCCM calibration.

3. Inspect for TCCM water intrusion.
4. Replace transfer case encoder/motor. 1. Check voltage on pin A, Light Blue wire at the engage switch.

2. The voltage should remain near 1.0v with no buttons pushed, compare to the value on the scanner when the problem happens.

3. Back close to the switch by hand and check for a glitch.

4. Wiggle tug test harnesses at the switch and TCCM.

5. Check terminal to pin grip. could be your transfercase control module locater under drivers side of dash. or the encoder motor

Oct 23, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

I have a 2004 chevy silverado and the 4 wheel


the most likely cause is the front axle shift motor if bad your your front axle shaft will not lock in.if there is no shifting of transfer case there is also a electric motor that engages that in .

Oct 17, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

2 Answers

Four wheel drive buttons


ARE YOU DOING IT WHILE IT'S IN NETRUAL, BEFORE YOU PUT IT IN GEAR AND WAITING FOR IT TO ENGAGE? IF NOT THAT IS YOUR PROBLEM.

Sep 23, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

4 wheel drive doesn't work


sounds like the shift motor on the transfer case is going bad.

Aug 29, 2009 | 2004 Chevrolet S-10

1 Answer

97 Silverado K1500 350 VTEC 5.7 Stuck in 4 Wheel Drive


If it has the push button 4wd selector on the dash, it is most likely the transfer case encoder motor. Not to bad to replace but you will have to remove the front driveshaft.

Aug 19, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Stuck in 4 wheel drive and wont come out.


hey there i cant tell you what you are missing but i can tell you how to disengage the front wheels . ok you have a vacum line that runs right under the battery and a line that comes up from the front diff. to the same place ( you may have to remove batt and batt tray to get full access to this) un bolt it and temporaly put batt and batt tray back in start it up and decompress this and see if it comes out .... you should here clunking noise if it goes back in ... if thats the case just pull that big vaccum line off .... to test get all four tires off the ground and have some one put it in drive but dont hit the gas it should turn on its own ...if that dont work check the cable that runs down to the differental

Aug 04, 2009 | 2000 Chevrolet Silverado 1500

2 Answers

Lights on push button 4 wheel drive out


have the electronic transfer case checked the switch is stuck or broken

Jun 25, 2009 | 2001 Chevrolet Silverado 1500

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...