Question about Chevrolet Malibu

1 Answer

Washer pump doesnt work fuses seem to be good

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

Most likely the button is bad. If you don't hear it making noise when the button is pushed then the pump is not getting power if the fuse is not blown then the pump motor is likely to be dead. you can run a wire from the pattery to grond to the black wire on the washer pump and one to the postive side and see if it will run, if it does then you know the pump motor working and the problem is in the switch. If it does not run replace the pump motor.

Posted on Sep 27, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Washer pump doesnt work or run on front. back works fine, same pump and fuse for both

Look at the hose's could be cracked or for that matter could be off somewhere !
Washer Pump/Motor- The reversible electric washer pump/motor unit is located in a dedicated hole on the lower outboard side of the washer reservoir, on the left side of the cooling module fan shroud. This single reversible washer pump/motor provides washer fluid to either the front or rear washer system plumbing, depending upon the direction of the pump motor rotation.

Feb 07, 2015 | 2010 Jeep Liberty

1 Answer

Fix my horn and washier fluid

Two independent systems. Horn just wears out, needs to be replaced usually.

Washer fluid pump or a broken line, have a friend hit the button for washer fluid and see if you can see excess liquid coming from anywhere under the hood. If not, the pump is more than likely just burned out as well.

Cheap parts and easy to get at a local auto parts store. Most counter-people will even talk you through a repair like that.

Jan 08, 2014 | 1997 Dodge Ram

1 Answer

What fuse for wiper washer motor

The wiring diagrams in the Haynes book should show the washer pump circuit? Often the washer pump shares the same fuse as the wipers.
You could pull off the electrical connector for the washer switch, or the multi-function switch if so equipped, and check for voltage on the pump wire going to the switch, key on. Then check if power going out of switch to the pump-key on and pump switch on. If power on both, the wire from switch to pump must be broken. Run a new wire. If power into switch but none out-switch is bad. If no power into switch for the pump, may have to keep looking for a bad fuse or the wire from fuse panel to the washer switch may have a problem. Hope this helps, good luck.

Feb 08, 2013 | Cars & Trucks

1 Answer

Washer fluid motor/pump not working

You need wiring diagrams when you work on your own vehicles

Dec 18, 2012 | Cars & Trucks

1 Answer

2003 Mazda Tribute front and back washer pumps not working

did you check washer motor alone? find motor and power it with external 12 votls battery or use a cable to power it with your own battery. you need to hear sound. if it creates arcs when you touch wires motor can be burned. if it is burned inside fuse can still be ok. i replaced my washer motor on bmw last week and situation was so.

Nov 19, 2011 | 2003 Mazda Tribute

1 Answer

The windshield fuse pump is not working, The wipers are working and the little tank is filled with water. But when you try to clean it with the water it doesnt come out. Its a scion tc 2007. What can i do...

Try pulling the hose off the pump and have a helper turn the washer on....
If water sprays out you have a broken, disconnected hose elsewhere, or the nozzles are clogged.

If no water sprays, check the fuse. If fuse is good, then its the pump, or the connection at the pump, or the washer switch.

Aug 24, 2011 | Scion TC Cars & Trucks

1 Answer

Windshild washer fluid not squirting in front.

They use same fuse, See if you hear it running when you depress the washer button. If not, check for power at the Dark Blue Wire at the washer pump. If it has power, and the Brown wire is grounded. then the washer pump should work, if it doesnt , replace the pump. The washer pump Dark Blue wire shoul dbe hot and the switch grounds the Brown wire.

Dec 16, 2009 | 1997 Plymouth Voyager

1 Answer

Daewoo Lanos 2001 windshield washer pump not working???

Try to find the fuse, if the fuse is ok try to remove the cable under the pump and reconnect them, if the pump still dosent work u need to buy a nes one and replace it.
By the way, start with check that u have power to the pump, buy a test lamp tp do that, you need to be two for testing that, one for pushing the switch and one to check the test-pamp.

Good luck!

Nov 19, 2008 | 2001 Daewoo Lanos

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides