Question about 2000 Chrysler Sebring

2 Answers

Blower motor works on high speed only - 2000 Chrysler Sebring

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 6,674 Answers

Usually blower resistor is cause of this. Look in behind glove box area, or ducting under passenger side. Follow wires back from motor to resistor.

Posted on Sep 27, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,011 Answers

Hello what is going on here is your blower resister has failed. The part is located under the passenger side of the dash by the blower motor .The part runs about $35 hope this helps :)

Posted on Sep 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is an AC diode fuse? I have a 2006 AWD Pontiac Torrent the AC/Heat doesn't work, I've changed all fuses for the HAVAC and still no AC/Heat blowing out of vents. What could be the problem?


Could be a number of thing's ! Testing the electrical circuit is the way to find out what's wrong . Using a wiring diagram and a DVOM - digital volt ohm meter . Videos on youtube showing how to test it ! Without testing i would only be guessing . Does it work in high speed ? In high speed it by-passes the resistor . If it doesn't work in any speed more then likely the blower motor is the problem !
Air Speed
The HVAC control assembly applies ground to the blower motor control circuit that corresponds to the selected blower speed. The resistors and the blower motor are in a series circuit. The following list represents the number of resistors in series with the blower motor per particular speed request:
• Low speed--3 resistors
• Medium 1 speed--2 resistors
• Medium 2 speed--1 resistor
When the operator requests High speed, the HVAC control assembly applies ground directly to the blower motor through the high blower motor control circuit. The resistor card has a fusible link which, if blown, will require that the card be replaced.

Blower Motor and Resistor Diagnostics by Wells

Jun 11, 2017 | Pontiac Cars & Trucks

1 Answer

98 buick heater stop working


Its faulty blower motor resistor. The low and medium speed on blower motor is controlled by resistor and its actual speed is high. So because resistor is not working, blower motors actual speed which is high is working.


It can be faulty blower motor or faulty blower motor resistor. Get the blower motor inspected. If it's faulty it has to be replaced.


=======

For blower motor testing and replacing, check the link below: ----

Blower motor Testing/replacing for all vehicles?

http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html

------------

These will help.

Thanks.

Dec 14, 2012 | 1998 Buick LeSabre

1 Answer

Sorry its blower



Its faulty blower motor resistor. The low and medium speed on blower motor is controlled by resistor and its actual speed is high. So because resistor is not working, blower motors actual speed which is high is working.


It can be faulty blower motor or faulty blower motor resistor. Get the blower motor inspected. If it's faulty it has to be replaced.


=======

For blower motor testing and replacing, check the link below: ----

Blower motor Testing/replacing for all vehicles?

http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html

------------

These will help.

Thanks.

Dec 07, 2012 | 2006 Kia Sportage

1 Answer

Heater is not working


HEATER BLOWER MOTOR


Its faulty blower motor resistor. The low and medium speed on blower motor is controlled by resistor and its actual speed is high. So because resistor is not working, blower motors actual speed which is high is working.


It can be faulty blower motor or faulty blower motor resistor. Get the blower motor inspected. If it's faulty it has to be replaced.


=======

For blower motor testing and replacing, check the link below: ----

Blower motor Testing/replacing for all vehicles?

http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html

------------

These will help.

Thanks.

Nov 28, 2012 | 1988 Honda Accord 4 Door

2 Answers

2005 jeep AC and heater blower only high speed works


check fuses, then wiggle speed control while moving, may need new dash control for lower speed, usually high speed works through relay may be the reason high speed works

Nov 03, 2010 | 2005 Jeep Grand Cherokee

3 Answers

I only get the fan to work on high speed, the lower speeds do not work


Hi!!
The Blower Motor Resistor also called Manual Temp. Control resistor), is fried, replace. The price with floor console $25 and without floor console $65. here is a pic.
87b9810.jpg

the resistor is located on the blower motor housing, fastened by two screws. It is the part where the electrical plug connects, the plug on the pic. goes to the blower motor.
A HELPFUL - 4 THUMBS rating for this solution would be greatly appreciated. Thank you for using FixYa.

Oct 19, 2010 | GMC Yukon Denali Cars & Trucks

1 Answer

Blower motor wont work


Disconnect connector at blower under pass side of dash.Check for power & ground with the blower switch in the #4 speed (High).Most Likely a blower motor if all 4 speeds are out.If high works but no other speeds,you need a blower resistor.Blower easy to change 3 screws & one connector.hope this helps

May 19, 2009 | 1993 Saturn SL2

2 Answers

Front blower motor doesn't work, rear does


yes, all blower motors have them to control their speed, High, medium, low.. etc. I earn nothing by helping you, but my rating, a fixya rating and I will walk you through this

Dec 20, 2008 | 2005 Chrysler Town & Country

Not finding what you are looking for?
2000 Chrysler Sebring Logo

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...