Question about 2003 Toyota Corolla

2 Answers

Need to replace front wheel bearings. where can i get info now?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 439 Answers

Log into Autozone.com and add your vehicle. Search for "wheel bearings" and to the right of the page you should see the repair guide with all the info you will need.

Posted on Sep 27, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 92 Answers

Take to a shop. Not a job you can do at home. Takes a shop press (10 ton) to press these in and out.

Posted on Sep 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I fix tire sqeel after hanging front wheel bearings ? Camber seems towed out.


Richard, If camber noticeably out and tires are squealing,you will need to take in and have it checked out and aligned at a good shop.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

May 15, 2016 | Cars & Trucks

2 Answers

I replaced driver side front wheel bearings, but starting to hear squeaks. Is this a lack of packing grease?


Dan, squeaking could be from improperly packed bearing or hub nut not tightened properly. Did you replace the races also.
Check the attached links, They will answer a lot for you.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

How to Change Wheel Bearings Step by Step

Pack Wheel Bearings 1994 Ford F150 2WD Pickup Part 5

How To Install Replace Front Brakes 93 97 Ford Ranger 2WD 1AAuto com

Replacing Rotors with Tapered Roller Bearings EricTheCarGuy



Mar 12, 2016 | 1990 Ford Econoline

1 Answer

How to replace front wheel bearings on 2005 ford freestyle


The front wheel bearings are replaced with the entire hub assembly, we don't have the exact model info but we do have access tot he Ford Explorer instructions, which are pretty much exactly the same procedure with minor differences. Bolt torque on the new hub nut is 285 Foot pounds, you do need heavy duty tools as you will see.

Oct 15, 2012 | 2005 Ford Freestyle

2 Answers

I have a 1993 GMC Safari that started making a strange noise from the front end I have taken it to 2 mechanics they both tell me that the problem is the wheel bearing. 1 says the bearing is in a sealed...


I just re-packed the front end bearings. Haynes covers the brakes real well, but not the bearings. Each front wheel has two bearings (one inside the wheel). So you have to remove the wheels, brakes, dust cap, grease seal and brake rotor to access the bearings. .
Expect to replace the grease seal because the rubber will be brittle or hard. Clean and inspect the bearings and races real well. If the bearings are squealing expect to replace some of them also.
Replacing the brakes so the pads stay in place is the trickiest part.

Jan 08, 2011 | 1993 GMC Safari

1 Answer

2002 freelander front wheel bearing replaceing.


The File for this is too Large for FixYa .com Email me @ rejakwilson @ aol.com I Will send Complete File if Procedure

Oct 04, 2009 | 2002 Land Rover Freelander

1 Answer

Can i get step by step instuctions for replacing a wheel bearing


You need to provide more info. Is it a front or rear bearing? That would be a good start.

Jun 21, 2009 | 1996 Ford Taurus

1 Answer

Cant find info or book on repairing the front wheel bearrings on my car,or even a "manual" for a 2001 Hyundai Tiburon!


Yes autozone.com has a repair guide for your car,you will be able to get the steering knuckle off,this is where the bearing is but ir requires a press or an equivlant to remove and replace the bearing.

May 25, 2009 | 2001 Hyundai Tiburon

1 Answer

Front bearings can I replace? what tools do I need?


The caliper has to come off first,then the rotor. Examine the outer bearing first for cracking, pits,rust,etc., it may be OK. If you want to replace them , you need new seals too. The outer bearing races can be knocked out with a hammer & punch
Pack the new bearings with grease,install the seal with a hammer & 2x4.
To set the bearings:
Tighten the nut to 12 ft/lbs while rotating the wheel
Back off the nut dead loose
Tighten it finger tight
back it off to the first pin hole
This should leave .001--.008 thou. end play
Hope that's enough info!

Apr 26, 2009 | 2003 Chevrolet Silverado 1500

3 Answers

Wheel hub assembly front 1997 sebring


  1. Raise and safely support the vehicle.
  2. Remove the front tire and wheel.
  3. Remove the steering knuckle assembly, as described previously.
  4. Remove the bolts attaching the hub/bearing assembly to the steering knuckle.
  5. Remove the hub/bearing assembly from the front of the steering knuckle. The bolt-in front wheel bearing used on the vehicle is transferable to a replacement steering knuckle, if the bearing is in serviceable condition. If the bearing will not come out of the steering knuckle, it can be tapped out using a soft-faced hammer.
  6. a567c9e.jpg

  1. Thoroughly clean all parts, including the hub/bearing assembly mounting surfaces on the steering knuckle.
  2. Install the replacement hub/bearing assembly onto the steering knuckle, aligning the bolt holes of the bearing flange to the knuckle.
  3. Install the attaching bolts and tighten evenly to make sure the bearing is square to the face of the steering knuckle. Tighten the attaching bolts to 80 ft. lbs. (110 Nm) on Cirrus, Stratus, Sebring convertible and Breeze, or 65 ft. lbs. (88 Nm) on Sebring coupe and Avenger.
  4. Install the steering knuckle assembly, as previously described.
  5. Install the tire and wheel.
  6. Lower the vehicle and check for proper operation.

Feb 01, 2009 | 1997 Chrysler Sebring

Not finding what you are looking for?
2003 Toyota Corolla Logo

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...