Question about 1996 GMC Jimmy

2 Answers

Circut breaker for the Power locks ,remote and power drivers seat

The 20 amp circut breaker gets extremly hot and the power door locks will not work after clicking them once or twice , I'm guessing a short under the seat as the seat will not work at all. Any advice ??

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 142 Answers

Well the wiring for the doors and the windows run of ontop the floor by the rocker panel. opem the driver door remove the bottom plastic trim piece that follows the weather stripping and carpet, check the wiring for damage such as water chaffed wiring or cut wiring, i dont think it would be under the seat as the power door lock wiring will not be under there

Posted on Sep 27, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • GMC Master
  • 2,007 Answers

Try unplugging the power to the seat, and see if the locks will work and the breaker cools off. If not, you may have a short in the door jam where all your wires go through.

Posted on Sep 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to find fuse boxs


FUSE PANEL LOCATION
The fuse panel is located in the engine compartment. A label on the inside of the cover lists the fuse amperage and circuits protected.
volvo 850 fuses fuse panel layout service repair manual
FUSE PANEL IDENTIFICATION
Fig. 1: Fuse Panel Identification
Courtesy of Volvo Cars of North America.
WARNING: Always disconnect battery ground cable before servicing "high-current fuses. It is recommended that "high-current" fuses be replaced by a qualified technician.
* 1 - 15 Amp
Fuel Injection, Distributor Ignition, Automatic Gearbox
* 2 - 15 Amp
Fuel Pump, Alarm System
* 3 - 10 Amp
Courtesy Lights, Oil Level Sensor
* 4 - Not Used (1993-95)
* 4 - 10 Amp (1996)
Electronic Start Inhibitor (Immobilizer)
* 5 - 30 Amp
ECC Blower (Speed 4)
* 6 - 25 Amp
Central Locking System, Alarm
* 7 - 15 Amp
Audio System (Amplifier)
* 8 - 25 Amp (1993-95)
Power Antenna, Trailer Connector
* 8 - 40 Amp (1996)
Electronic Start Inhibitor (Immobilizer)
* 9 - 30 Amp
ABS, Traction Control System
* 10 - Not Used (1993-95)
* 10 - 15 Amp (1996)
Heated Rear Seat (If Equipped)
* 11 - 30 Amp
Heated Rear Window & Side Mirrors
* 12 - 10 Amp
Brake Lights
* 13 - 15 Amp
Hazard Flashers, Headlight Flashers, Alarm
* 14 - 30 Amp
ABS, Traction Control System
* 15 - 10 Amp (1993-95)
Audio System, Courtesy Lights, Door Open Light, Trunk Light, Glove Box Light, Remote Control Central Locking System,
Oil Level Sensor, Seat Belt Reminder
* 15 - 10 Amp (1996)
Audio System, Courtesy Lights, Door Open Light, Trunk Light, Glove Box Light, Remote Control Central Locking System,
Oil Level Sensor, Seat Belt Reminder, Data Link Connector
* 16 - 30 Amp (1993-95) Accessories
* 16 - 30 Amp (1996)
Power Antenna, Trailer Connector, Accessories
* 17 - 10 Amp
Key Reminder
* 18 - 25 Amp (1993-95)
Heated Front Seats, Power Mirrors
* 18 - 15 Amp (1996) Front Fog Lamps
* 19 - 15 Amp
Left High Beam Headlight
* 20 - 15 Amp
Right High Beam Headlight, High Beam Indicator
* 21 - 15 Amp
Left Low Beam Headlight
* 22 - 15 Amp
Right Low Beam Headlight
* 23 - 10 Amp
Left Parking Light, License Light
* 24 - 10 Amp
Right Parking Light, Bulb Failure Warning Sensor
* 25 - 10 Amp
Rear Fog Lamps, Fog Lamp Indicator
* 26 - Not Used (1993-95)
* 26 - 25 Amp (1996)
Heated Front Seats, Power Mirrors
* 27 - 15 Amp
Back-Up Lights, Turn Signals
* 28 - 10 Amp
Cruise Control, Heated Rear Window, Seat Belt Reminder Light, Shiftlock, Bulb Failure Warning Sensor, Heated Rear Seat
* 29 - 15 Amp
ABS, Traction Control System
* 30 - 10 Amp
Cigarette Lighter
* 31 - 25 Amp
ECC, ECC Blower (Speeds 1-3)
* 32 - 10 Amp
Audio System, Remote Controlled Central Locking System
* 33 - 15 Amp (1993-95)
Power Seats, OBD Test Socket, Tailgate Washer/Wipe (Wagon)
* 33 - 15 Amp (1996)
Power Seats, Tailgate Washer/Wipe (Wagon)
* 34 - 25 Amp
Windshield Wiper/Washer, Horn, Headlight Washer/Wiper
* 35 - 10 Amp
Instrument Lights, Sun Roof, Traction Control System
* 36 - Not Used
* 37 - Circuit Breaker
Power Windows, Power Sun Roof
* 38 - Not Used
* 39 - Circuit Breaker
Drivers Power Seat
* 40 - Circuit Breaker
Passengers Power Seat
RELAY PANEL LOCATION
The relay panel is located at the left corner of the instrument panel.
i copied this off a volvo site Hope this helps

Oct 10, 2016 | Volvo 850 Cars & Trucks

1 Answer

Does a 1987 gmcjimmy s-15 have a power window relay ot any relays at all cuz my power windows stoped working it runs a 30 amp circut breaker can the circut breaker go bad?


Anything can go bad, but to my knowledge circuit breakers seldom do. If you have a test light, pull the circuit breaker and probe both terminals for a power signal, with the key on. One terminal should show voltage with key on. If not, check the power distribution box for a blown maxi-fuse, or the wiring from that box to your fuse panel.
BTW, no, no relays are in the window circuit. So if the circuit breaker has power to it, put it back in and check for power on the driver's door master switch-one wire on the master should have voltage with key on. If no hot wire to the master switch, check inside the door openings for a broken wire. If you do have one hot wire there. check the power windows ground-the ground wire for the power windows originates at the master switch and goes back into the cabin to a nearby ground. Put one lead of the test light on the hot wire (key on), and probe the ground terminal at the master switch-if your ground is good, the test light will light up. If the ground is lost, no light. Check for a broken ground wire in the door opening, and/or find the ground and see if it is bad. If the master switch has a hot wire and a good ground wire, replace the master switch.

Apr 25, 2013 | 1987 GMC Jimmy

1 Answer

Driver's power seat does not work


Are you also having other things that do not have power, such as the radio or power mirrors, or the wireless door locks / security system? I owned a 1996 Oldsmobile product that had the same problem. I discovered that a circuit breaker in the fuse box was being overloaded. The same circuit breaker that operated the seats also operated the wireless remote. Apparently, the wireless remote receiver was getting "hung" and constantly drawing electricity and tripped the breaker. When the breaker tripped, my seats also quit working. Thus I quit using the wireless remote and the seats have worked fine ever since.

Dec 16, 2011 | 2003 Chevrolet Silverado 1500

2 Answers

Power windows stopped working


If the power to the illumination and the switches is out in the door, I would say it is a broken wire in the A-pillar to the door on the driver's side.

This is a Light Blue w/ Black stripe wire, it powers both the illumination and the windows themselves.

Jun 09, 2010 | 2006 Ford F-150

2 Answers

Head lights cycle


this is caused by a defective headlight switch, the connector should be repalaced as well

Sep 16, 2009 | 1983 Volvo GL

1 Answer

1999 cadillac seville sts driver side master control pannel dead


The same circuit breaker feeds the driver door as well as the passengers doors . The wires inside the rubber boot from the body to the door are probably broke ,power or ground wire .Or the door module is bad . Are your familiar with electronic control modules ? The door functions ,windows , lock's , memory etc... are controlled by DDM - driver door module .
Door Control System Operation
This vehicle has five modules capable of performing door system control functions. Vehicle door system components (windows, locks, mirrors, etc.) are controlled directly by these modules. There is a door module located inside of each vehicle door:
• Driver Door Module
• Passenger Door Module
• LH Rear Door Module (LRDM)
• RH Rear Door Module (RRDM)
• LH Front Power Window Switch
Simple Bus Interface (SBI)
Each Door Module communicates with the other Door Modules on the SBI. The driver door module is the only Door Module that is capable of communicating over the Class 2 Data Line as well as the SBI.
Driver Door Module
The driver door module directly controls the LH Front door lock actuator, power window motor and the outside rear view mirror. The driver door module sends and receives messages received from the LH Front Power Window Switch to the passenger door module, LRDM and RRDM modules over the Simple Bus Interface (SBI) line. Also, the driver door module sends and receives message from other vehicle system modules via the Class 2 Data Line.
Pulling the door panel off an checking B+ voltage and ground for the module would be good for you to do , since you probably don't have a $6,000 factory Tech 2 scan tool to see if the DDM is communicating .
The driver door module has two main power feeds (high and low current), and two main grounds. The low power feed (battery 1) is used to provide power for the driver door module's logic and internal driver operation. The high power feed (battery 2) is used to provide power for systems that draw higher amounts of current (motors, lights, etc.). Operating current at the driver door module's battery should not exceed 3.0 amperes at battery 1, and 7.5 amperes (for 2 seconds) at battery 2 while the driver door module is awake, and 2.5 milliamps when the driver door module is asleep. For most driver door module functions, the driver door module will operate properly with a system voltage of 9.0-16.0 volts. If system voltages exceed 16.0 volts the driver door module will provide protection by disabling certain functions that may damage due to higher than normal system voltages.

What kind of manual do you have ? The info above is from a factory repair manual .
The fuse's ,circuit breaker for the door module are located in the rear fuse box , not under hood . PWR WDO circuit breaker 30 amp. , DRVMDL fuse 10 amp. The rear fuse box is located under the back seat . Watch this video ,different type vehicle but probably the same problem .
Dodge Grand Caravan No Power Window No Power Locks CAN Trouble

Jul 23, 2017 | 1999 Cadillac Seville

1 Answer

On jetta power moon roof,door locks and trunk lock all dont work Whats the answer/????? Fuse? circut breaker? where???? All of a sudden all dont work....are all on same circut


I have a 01 beetle that moonroof closes to about 3" from closed position, then reopens... It will not close all the way. I have cleaned and oiled the tracks?????

Apr 07, 2009 | 1999 Volkswagen Jetta

1 Answer

Power windows not working


Are power locks working? (I think they are on the same circut) Don't think there is a fuse, most likely there is a circut breaker (small metal rectangle plugged into fuse panel Check your manual for location. There may also be a relay for this. Generally I have found that most problems with Jeep windows begin with a failure in the master switch (Drivers door) Everything else goes through there and makes other switches malfunction. Of course since I said that yours will be different, but take a look there to start. Otherwise get a really good wiring diagram and carefully trace from power source.

Dec 21, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
1996 GMC Jimmy Logo

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...