Question about 1990 Nissan Pulsar

1 Answer

Revs in all gears no drive at all

Automatic gearbox revs in all gears no drive at all, Selector is moving and gear lever but no movement. the dipstick is reading full

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 14,036 Answers

MAKE SURE MANUAL LINKAGE IS PROPER ADJUSTMENT.IF ALL IS GOOD.YOUR TRANSMISSION FLUID AND FILTER HAS BEEN CHANGE RECENTLY. FORWARD CLUTCH AND CLUTCH PLATES WORN OUT OR OIL PUMP IS WORN OUT.YOU PROBABLY LOOKING AT TRADE IN OR OVER TRANNY.

Posted on Sep 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

AUTOMATIC TRANSMISSION , REVERSE GEAR WORKS , DRIVE DOES NOT


check the selector is adjusted and tight as you may be selecting the last of the gears as it moves . When stopped -place it in park and check where the selector is underneath

Apr 01, 2014 | 1995 Mitsubishi Montero

1 Answer

Automatic transmission will not engage gear


Sounds like the transmission is gone .Check the fluid level ,and sometimes the filters inside the transmission gets clogged up.have it checked by a qualified transmission mechanic.

Jan 05, 2014 | 2007 Chevrolet Chevrolet Equinox LT

1 Answer

Automatic gearbox has reverse only no drive tries but wont move forword, drives fine backwords, gear oil level ok and still red in colour no leaks


check your gearbox selector mech somthing may have come apart with wear and check it from under the vehicle but mostly be safe when you do this it may take a second person to select gears as you observe wats going on at the gear box end if its elect select you will find the selector has gone faulty try a pre used part

Oct 30, 2011 | 2000 Renault 181

1 Answer

1994 mazda navajo manual transmission gears are grinding and hard to shift.any idea what is causing this? it has a 5 speed .


The clutch plate or clutch adjustment seems to be the most likely thing in that it is not disengaging fully. Check the adjustment. There should be about 1" play at the top of the pedal movement and then the clutch should start releasing about halfway down. The other thing it could be is worn gear linkages and joint bushes. Have someone move the gear lever and check for play along the gear change train from the gear lever to the gearbox selector input.

May 05, 2011 | Mazda MAZDA5 Cars & Trucks

1 Answer

MY MERCEDES BENZ C200 OF 1996 CANNOT MOVE INFRONT IT CAN ONLY REVERSE WHAT COULD BE THE PROBLEM?


I assume the car is automatic transmission ? Can you select a lower gear manually using the selector ? Also with the engine running, parking brake firmly applied and the car in Drive, check the automatic transmission fluid is at the correct level. The dipstick is not present on some models however, which is a pain, and would require a dealer visit. If the stick IS present, its on the left side rear when viewed from the front of the car, make sure the fluid is between the two marks.
If your cars is manual/stick shift and it drives in reverse normally, but not in any forward gears then you have a selector issue or internal gearbox failure.

Jan 18, 2011 | 2000 Mercedes-Benz C-Class

1 Answer

The gear shift moves but never goes into gear. What can I check before calling machanic.


if th9is is rear wheel drive you will have to get under the vehicle and look at the cable that hooks up the selector shift inside of the vehicle to the transmission.... Any ways, look on the side ofthe transmission (drivers side and you should see a lever connected to a cable... see if that cable is dis-conected and/or moves when the selector lever (gear shift inside) is moved. If it does move with the movement of the selector lever, then the issue is locatred inside of thr transmission, and should be looked at by a mechanic... other wise reconnecting the cablke is as easy as tightening a bolt, and adjusting the placement of the cable inteh correct position, in sync with the transmission... IF you need more clarification, let me know and I will post pictures for you to look at and compare with your transmission...

IF FRONT WHEEL DRIVE:
Front wheel drive transmission is visible from under the hood and would be easier to diagnose, but what you are looking for (actuation of levers with movement of gear shifter from inside of vehicle, and cable attatchments are all similar, just in differenbt spots).....

Like I said, if you need p[ictures, let me knw and I will post them . Just tell me if rear wheel or front wheel drive.

Dec 03, 2010 | 1999 Pontiac Bonneville

1 Answer

Gearbox linkages are in and will not select a gear


Hi,

Make sure they are syncronised correctly and that non of them have too much movement in either direction.

Also ensure that the linkages are not crossing over up to the gear lever selector or on the gearbox selectors.

Thanks

Jason

Aug 13, 2010 | Kia Sportage Cars & Trucks

1 Answer

Code p0705


Code relates to error in transmission switch on side of automatic gearbox, as if the selector lever has been moved slightly out of its normal range. This might happen if the selector rod has been bent or the adjustment has become loose so when you engage 'drive' the lever is just a shade pushed too far or not enough. Check that the physical components: selector rod; the gear selector lever; and transmission selector lever are all as they should be.

Jun 29, 2010 | 2003 Toyota Camry

1 Answer

The automatic gearbox on my mondeo 2002 changes gears but slips


In the engine compartment, you will need to locate the transmission dipstick. Usually on the left side of the motor, labeled "Trans fluid". Pull it out and check the fluid level. Your problem could be as simple as putting transmission fluid in it. That will make it slip. You fill the transmission right down the dipstick tube.

Mar 22, 2010 | 2002 Ford SVT Focus

1 Answer

JAGUAR XJ8 GEARBOX ADJUSTMENT


There is an adjustment on the selector lever on the side of the gearbox (lhs) make this longer to give the gear lever more travel.There is also an adjustment on the gearbox selector sensor for the electronics system.

Nov 16, 2008 | 2007 Jaguar XJ8L Sedan

Not finding what you are looking for?

Open Questions:

See all 1990 Nissan Pulsar Questions

1990 Nissan Pulsar Logo

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...