Question about 2003 Chevrolet Silverado 1500

1 Answer

I would like to know what the inside of the doorlooks like behind the door panel tslick6

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 142 Answers

Well if you pull the door panel off you will have to remove a plastic noise barrier that is installed inside the door is very big and open filled with just a few cables and window regulator, of course when the window is down it sits close to the center of the inside of the door. its pretty much just an open shell

Posted on Sep 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Mazda Mpv replace door handle


Most doors have a main screw that hold the handle that pulls the door shut screwed to the frame behind it. Look for little removable trim pieces. Check behind the inside door latch for two screws. Need to remove the power window switch panel, and connector. Check for screws on the side of door panel. The rest are push pins that should pop out when you pull the door panel out. If you have a door light, be sure to reach behind and remove connector before removing the panel all the way.

May 27, 2013 | Cars & Trucks

2 Answers

Need to replace drivers side rear view mirror, powered. I have the new mirror, just need to know how t install it.


Hi,
You remove the door panel on the inside and it is bolted on from the inside. One wire clip and 3 bolts. Takes longer to remove and replace the door panel than replace the mirror....look for a hidden screw under the armrest , under the window/door lock button panel and sometimes behind the reflector or light on the bottom of door..Usually there are 3-4 screws and then the rest of the panel is held on by plastic clips. Get the screws out, then work a flat screwdriver or putty knife around the sides and bottom of panel, then lift upwards to get the top sealing side out of the track where the window runs.....Mike

Jul 14, 2011 | Buick LeSabre Cars & Trucks

1 Answer

I am trying to take the passenger door panel off of my 2003 kia spectra however it still seems connected towards the front side of the door but i tryed to removed the two tan screws just free spin i do...


hello,
Disconnect the negative battery cable to prevent shock when handling the door components. Loosen the cable's nut with the pliers and slide it away. Pop off the side-view mirror interior panel with the tweeter on it. Use the door panel trim tool or a flat-bladed tool, such as a putty knife, wrapped in masking tape. Once the panel is off, unplug the speaker connection from behind it. Push the connector's tab in with a flat head screwdriver and pull the connector away. Open the door fully to expose the screw cover on the front part of the door panel. Pry out the screw cover with a flat head screwdriver. Pry out the small centerpiece; not the ring surrounding it. Behind the cover, you'll find a Phillips screw; remove it.
Open the screw cover flap behind the inside door handle. Insert the tip of a flat head screwdriver into the upper-slot; push down to open the flap. Remove the Phillips screw from behind the flap. Pull off the plastic door handle surround piece. Insert the door trim tool behind the panel; pull it back to pull the panel off. Slide the surround piece away from the door panel.
Remove the circular screw cover from the inside door pull storage compartment. Pry it up with the flat head screwdriver. Remove the Phillips screw behind the cover. Remove the screw cover from the rear-edge of the door panel. This cover is similar to the one on the front part of the door panel; pry out the center part, not the ring surrounding it. Remove the Phillips screw behind it.
Remove the two Phillips screws visible along the bottom part of the door panel.
Pry around the perimeter of the door panel with the door trim tool. Pull the tool handle back to pop the door panel clips out. Do this for each side, except for the top. Once the clips are unhooked, the panel is ready for removal.
Gently pull the door panel away from the Optima's door, but only enough to access the area behind it. The connections for the power equipment must be unplugged. Reach around and depress the connection tabs with the tip of the flat head screwdriver; unplug the connection. There are three connections to unplug. Once they are unplugged, pull the door panel away.

Thanks

May 21, 2011 | 2003 Kia Spectra

1 Answer

Drivers side front door will not open from inside or outside even using the key


Sounds like the clips that hold the rods, that operate your inside/outside door handles have come loose. You will have to get the door panel off...but first...you'll have to get the door open. OK...where your inside door "lever" is located....there is a plastic cover behind that lever.....also, there might be a small plastic access cover... over the screw that holds on this larger cover in place. If so....pop the little access cover off and there will be a screw behind it. (keep in mind...this is behind the inside door lever you pull on to open the door) remove the screw...remove the cover...you should now be able to see where the rod has come loose. if you cant grab it with your fingers, get a pair of pliers and pull forward ( toward the front of the car) to open the door. Make sure the door lock is off also. You may find the clip that holds the rod to the lever is broken or the rod has just fallen out of the clip. Sometimes, you can wire the clip into place so it dosnt come loose again. At this point, you will want to remove the door panel....because the "outside door lever...rod...is also loose...in which case you will need access to the inside of the door to fix it. Just remember, you only want to this once...so while in there...fix it right....

Theroadisalover

Try to post back and let me know If I helped you solve your problem. It will help me with my rating....! Thanks

Jan 01, 2011 | 2001 Saturn L-Series

1 Answer

How do I take off the inside door panel to replace a Ford Expedition window guide that has come off?


there should be screw behind mirror trim panel one bottom of door behind courtsey light and one behind trim panel for window controls then lift straight up on panel

Mar 13, 2010 | 1998 Ford Expedition

2 Answers

Need to rmove passenger side mirror so nee to know how to remove trim


pull very carefully usaually held on be plastic grabber on the inside you just have to pry carefully

Oct 13, 2009 | 1997 Jeep Grand Cherokee

1 Answer

Driver side door inside panel


look behind handle for screw under a little plastic plate, same in side grip where you close door, maybe 1 more behind relector on door if equipped with one, then pull door slowly away, you will hear pops when doing this, it is ok. they are plastic screw kida things but they shouldnt break. if they fall out, you will need them to put door back on

Jun 25, 2009 | 1996 Oldsmobile Achieva

1 Answer

How to get door panel off?


should be s screw behind the interior handle, in the gripper thing you use to shut the door from the inside, then if there is a reflector ion the inside of the door remove it and the screw behind it, also look at the bottom of the panel there may be screws there too then get a screwdriver, and pry the panel away from the door. it will take a little prying, but it will pop off. dont be scared your not breaking anything, the plastic push pins are coming off

Jun 16, 2009 | 2002 Chevrolet Suburban

1 Answer

2001 Ford Expedition window came off track


You did not mention whether it was a front or rear door? I assume its a front because u stated no screws.

Here are instructions for front door:

Remove the plastic trim from behind mirror(just snaps on).
Remove the window switch panel(just snaps on).
Remove the screw behind the mirror cover.
Remove the screw behind the window switch panel.
Remove the courtesy lamp lens.
Remove the screw in the courtesy lamp housing.
Remove the inside door handle trim cover.
Remove the inside door handle bolt.
Lift upward and then outward to remove the front door trim panel

Feb 10, 2009 | 2001 Ford Expedition

1 Answer

How to remove drivers door panel on a 2007 Nissan Tiida hatchback


The door handle has a c clip behinde it that you can not see.Goto a auto parts store and thay will have a cheep tool to help you.(you need a special tool for this. The WINDOW CRANK handle has a 'c-clip' behind it. The door opening handle trim is held in by either a screw behind a plastic flap that will pop out(behind the lever)or it is held in at four points by plastic tabs (two on top and two on the bottom)that can be undone carefully with a screwdriver or the like. When this plastic trim is removed the door panel should come off.
Be aware that there are plastic clips (back side of the panel) on the perimeter of the panel that hold it in as well.
the tweeter panel just pops out look on the bottom of the door for screws and around the door handle and you will have to pop your window and door lock controls out and the reflector on the door pops out and there is two screws there then al you have is the clips behind the door they make tools for it but a flat tip screwdriver will be fine just get the tip close to the clip and pull it out .
1. Remove window crank (it has a kind of 'bent wire' c-clamp, which holds it onto the window crank shaft). 

2. Pry upwards the top plastic cover to the arm rest (this is a plastic coated foam rubber piece, on which you rest your arm). 

3. Remover the two now visible screws which fasten the arm rest onto the door. 

4. Remove the one screw fastening the inside door handle. 

5. With a blunt tool, gently hit the inside door handle in a forward direction (towards the door hinge). This will release the door handle from the door. 

6. Pry between the door panel and the door, to unsnap the snaps holding the door panel in place. 

7. Finally, lift door panel out and up to remove it from door. 

Feb 09, 2009 | 2007 Nissan Versa 1.8 Sl Hatchback

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...