Question about 1994 Buick Skylark

1 Answer

How to repair heater core

How do you repair a heater core in a 1994 buick skylark?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,081 Answers

The step by step procedure to remove the heater core is given below :

  1. Disconnect the negative battery cable.
  2. Drain the engine coolant into a clean container for reuse.
  3. Raise and safely support the vehicle.
  4. Remove the rear lateral transaxle strut mount, if necessary.
  5. Remove the drain tube and disconnect the heater hoses from the core tubes, lower the vehicle.
  6. Remove the sound insulators, console extensions and/or steering column filler, as required.
  7. Remove the floor console outlet ductwork and hoses.
  8. Remove the heater core cover.
  9. Remove the heater core mounting clamps and remove the heater core.

Posted on Sep 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to find both heater hoses top and bottom so i can bypass the heater core for my 95 buick skylark


YOUR LOOP WILL BE MADE WHERE BOTH HOSES GO INTO THE FIRE WALL TO HEATER CORE.YOU NEED A LONGER WATER HOSE I WOULD DO THIS FIX TO GET YOU HOME.

Jan 07, 2011 | 1995 Buick Skylark

1 Answer

Where and how do i get to the heater core on 1993 Buick Skylark


Replacing a heater core is a all day ugly job. You have to remove the dashboard and heater box. Its located behind the glove box. Best thing to do is buy a auto repair manual for your car and read up on this job.
Good luck and thanks for your question and I hope my suggestions help. burdfrenzy
Visit My eBay Store!
http://stores.ebay.com/Pittsburgh-Joes-Pants-Nat

Jan 03, 2011 | 1993 Buick Skylark

1 Answer

Does dash assy need to be removed to install heater core in a 1992 buick skylark


No the dash panel does not have to come out.You will have to remove the console if equipt.You will also have to jack the vehicle up and disconnect the heater hoses from the heater core.Let me know if you have anymore questions.Good luck.

Dec 03, 2010 | 1992 Buick Skylark

1 Answer

How do you replace heater core on 1993 buick skylark


it could be the electronic switch down under the dash that is faulty, not allowing the flap to close off and cycle the water through the heater core..

Jan 23, 2010 | 1993 Buick Skylark

1 Answer

Removal of heater core 1992 buick skylark


You locate the heater core by following the heater hoses in the engine compartment. These hoses need to be disconnected. Then, working inside the passenger compartment, take off all of the control panel. You'll see screws underneath if you lie on your back. The only trick is to pop out the vent louvers -- just pop them out with a screw driver. There are screws behind them. Take out the glove box. Take off the heater outlet duct and the heater core cover. Pull the heater core straight back to avoid breaking the drain tube. Remove some clamps and that's it.

Dec 31, 2009 | 1992 Buick Skylark

1 Answer

Replacement of heatercore


I believe you have to dissassemble the lower part of the hvac unit under the dash to gain access to the heater core, then disconnect the hoses at the firewall and remove the heater core.

Apr 13, 2009 | 1996 Buick Skylark

1 Answer

Antifreeze is pouring out of the center bottom 1996 skylark


Souds like a Heater core........but I am no mechanic.

Feb 17, 2009 | 1993 Buick Skylark

2 Answers

Water under dash board 1983 buick skylark


Your heater core needs to be replaced. The heater core is like a mini radiator, providing heat for the interior by coolant circulating from the engine, into the heater core, and back to the engine again. Like a radiator, a heater core can spring a leak, especially w/ age as a factor. This results in the leak inside the car, which also causes the 'smoke' you see, which is actually vapor form of coolant.

Nov 17, 2008 | 1983 Buick Skylark

1 Answer

Heater core


Pull the panel under the glove box. You should be able to see the heater core. disconnect the two hoses under the hood on the firewall to the heater core. put a pan below to catch the antifreeze. Replace heater core. reconnect hoses.

Nov 15, 2008 | 1990 Buick Skylark

1 Answer

Heater core leek


it is behind the plastic venting under the dash it has to be removed to get to the heater core

May 19, 2008 | 1986 Buick Skylark

Not finding what you are looking for?
1994 Buick Skylark Logo

458 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...