1993 Mercury Topaz Logo
Anonymous Posted on Sep 27, 2009

93 mercury topaz error codes 32 35 54 56 73

I have a 93 mercury topaz that stalls while driving and i have error codes 32 35 54 56 73 which code will solve this problem. i have replaced the fuel filter, spark plugs and wires, and distributor cap and rotor.

  • 1 more comment 
  • Anonymous Sep 27, 2009

    fuel pump is good and relay was built into the ecu and i have replaced that

  • Anonymous Sep 30, 2009

    I am a Dork.... When I replaced the air filter I didn't secure the lid and I this must have set these codes off because after I secured the lid the check engine light came off however the engine still stalls and I have to wait a few minutes to start the car as the fuel pump wont kick on right away. I see a fuel pump replacement in my future.

  • Anonymous Oct 05, 2009

    well i have replaced the fuel pump, fuel pump strainer, fuel pump sending unit and fuel filter and i replaced the cam sensor and the car sill stalls and the check engine light is off. What else can cause this issue?

×

2 Answers

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 811 Answers
  • Posted on Sep 27, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Sep 11, 2009
Answers
811
Questions
0
Helped
295869
Points
2322

Check fuel pump or relay

Testimonial: "Thanks for your help "

  • Anonymous Sep 27, 2009

    check crank position sensor

×

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 10 Answers
  • Posted on Jun 16, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Problem Solver:

An expert who has answered 5 questions.

Joined: Jun 10, 2012
Answers
10
Questions
1
Helped
8944
Points
23

Most mercury,s and fords have a air heater vent usually towards the front of the radiator toward the front of the car/truck under the hood sometimes you have to take the round usually black hose off 1 end has like a switch module on it (closest to front) spray it with electrical contact cleaner (non comb ustible kind!!!) let dry and reinstall i hope this helps!!

  • Anonymous Jun 16, 2012

    most mercury,s and fords have a air heater vent usually towards the front of the radiator toward the front of the car/truck under the hood sometimes you have to take the round usually black hose off 1 end has like a switch module on it (closest to front) spray it with electrical contact cleaner (non comb ustible kind!!!) let dry and reinstall i hope this helps!!

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

What are obd1 codes odb1

JUNK IT!!!!! I went thru electrical problems last winter, and spent way over a thousand dollars. all the new parts were rebuilt in china. I finally got a coil pack and ignition module from a junk yard and then it ran like new ever since.
0helpful
1answer
0helpful
1answer

Where is the plug in for the code indicator on a 93 topaz

It is under the hood but you need a special tool called a Rotunda "Star Tester" to read the codes.
7_7_2012_12_42_24_am.gif
0helpful
1answer
0helpful
1answer

Changing the front wheel bearing on a 92 mercury topaz

replace front right wheel erings 93 mercury topaz
0helpful
1answer

1991 Mercury Topaz engine stalls while driving...replaced temp sensor regarding pumping fuel...but that didn't solve problem. Any ideas?

Hey check out my thread, see if we are having the same problem, sounds familiar possibly.

http://www.fixya.com/ThreadAsker.aspx?thid=7662591
1helpful
1answer

I have a 93 mercury topaz that stalls while driving

if it only stalls hot relace the ign module on distributor
1helpful
1answer

Mercury Topaz serpentine belt diagram

I have a 93 topaz, the diagram label is under
the hood itself.
0helpful
1answer

1994 Topaz engine stalling

Normally this kind of a problem is a fuel block...there so many other ways to block...other than the filter

PLEASE don't forget to RATE ME (FIXYA) for my help..........
Not finding what you are looking for?

544 views

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...