Question about 2008 Chrysler Aspen

1 Answer

HOW REMOVE THE REAR TIRE HAVE ALL LUG NUTS OFF I PULLON THE TIRE AND IT DOES NOT COME OFF

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 811 Answers

Spray lubricant on lug bolts, push pull on out side of tire , one side then other , make sure vehicle is secure, don't body or limbs under tire or vehicle

Posted on Sep 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear right tire on a 2003 chevy malibu wont come off after lug nuts removed


get a BIG hammer and try striking tire (NOT RIM) USE SOME LUBE SPRAY

Sep 30, 2012 | 2003 Chevrolet Malibu

1 Answer

Changing rear flat tire


Find jack follow instructions to raise vehicle after parking brake is on. Remove lug nuts and take wheel with flat tire off. Replace with the spare tire and tighten lug nuts. lower vehicle, put jack , lug wrench and flat tire in vehicle. Drive to a tire repair store and fix the problem.

Dec 11, 2010 | 1996 Dodge Caravan

1 Answer

How to change front brake pads on 2006 town and country


Loosen tire lug nuts. Jack up the car and remove lug nuts and tire. Remove two bolts holding the caliper in place. Remove the the two bolts holding pads in place. Hang caliper with a wire from wheel so brake line is not stressed. Mount new calipers in correctly and tigthen pad bolts. Put caliper on and tighten caliper bolts. Replace tire and lugs nuts. Jack car down and tigheten lug nuts.

Aug 17, 2010 | 2006 Chrysler Town & Country

1 Answer

How to disassemble the rear end in a 2000 gmc yukon and how to remove axles


Removal & Installation To Remove:
  1. Before servicing the vehicle refer to the precautions at the beginning of this section
  2. Loosen the lug nuts on the wheel and tire assemblies but do not remove the lug nuts
  3. Raise and support the vehicle
  4. Remove or disconnect the following:
    • Wheel and tire assemblies
    • Axle lubricant into a suitable container
    • Rear driveshaft
    • Parking brake cable
    • Brake calipers
    • Shock absorbers from the axle brackets
    • Vent hose from the rear axle vent fitting
    • Nuts and the washers from the U-bolts
    • U-bolts, spring plates and spacers from the axle assembly
  5. Lower the axle assembly from the vehicle
To Install:
  1. Place the rear axle assembly under the vehicle
  2. Align the rear axle assembly with the springs then connect the spacers, spring plates and the U-bolts to the rear axle
  3. Raise the rear axle assembly into position
  4. Install or connect the following:
    • Washers and nuts to the U-bolts; Torque to: 59 lb-ft. (80 Nm) then, Torque to: 89 lb-ft. (120 Nm)
    • Vent hose to the rear axle vent fitting
    • Shock absorbers to the rear axle
    • Brake calipers (See: Brake Caliper)
    • Parking brake cable (See: Parking Brake Cable)
    • Rear driveshaft (See: Rear Driveshaft)
    Wheel lug nut tightening sequence gm_trk_sub15_wheel_lug_nut_tight_seq.gif

  5. Fill the rear axle with lubricant
  6. Bleed the brake system (See: Brake Bleeding)
  7. Install the wheel and tire assemblies
  8. Lower the vehicle to the ground
  9. Torque lug nuts as follows:
    • Single Wheel: Torque to: 140 lb-ft. (190 Nm)
    • Dual Wheel: Torque to: 175 lb-ft. (240 Nm)
  10. Road test the vehicle to check performance
prev.gif next.gif

Aug 03, 2010 | 2000 GMC Yukon XL

1 Answer

How do i change the back tire


Find the jack and jack up the rear just in front of the rear tire you are changing. (don't lift off ground completely yet). Using the lug wrench (also called a tire iron) break loose each lug nut.

Finish raising the vehicle just high enough that the tire isn't touching the ground. Finish removing the lug nuts, then pull tire off. Put new (different/spare) tire on, and put the lug nuts back on, and tighten by hand until tire is snug. With the car still raised, lightly tighten the lug nuts, until snug again (by use of lug wrench).

Lower car completely and tighten the lug nuts again (do not over tighten). At all points of tightening lug nuts, do so in a criss cross pattern. Start with one, then move to the one directly across from that, and so on (not all will be "directly" across at all times, so just make sure you alternate and don't go in any consecutive (clockwise/counter clockwise) order.

Let me know if you need further assistance.

carsandcomps,

Guru, Premium Expert @ Fixya.com

May 29, 2010 | 1995 Toyota Camry

1 Answer

Step by step instructions on replacing front and rear brakes on 1993 camry


1) Jack up car
2)remove lug nuts
3)remove tire
4)unbolt brake caliper
5)remove old brakes
6)install new brakes
7)reinstall break caliper
8)reinstall tire
9)reinstall lug nuts
10)let car down
11)repeat procedure for other wheels

Jan 16, 2010 | 1993 Toyota Camry V6

1 Answer

Broke off lug nut while changing a rear tire


You will have to remove the brake drum or rotor if it has disc brakes and drive the broken lug out of the drum or rotor. Purchase a new lug from any auto parts store buying the exact same size and drive the new one in. Reinstall the tire/wheel and torque the lug nuts to 100 lb/ft with a torque wrench.

Oct 28, 2009 | 1991 Ford Taurus

1 Answer

How do you change a tire on a honda crv? I need to get the tire off the back door and change the driver side front tire. Where does the jack go?


The owners manual shows where to put the jack. I no manual sometimes there are illustrations where the jack is stored in its compartment. First loosen the lug nuts before you jack up the vehicle, prevents the tire from turning. After jacking up the vehicle finish removing the lug nuts then remove the tire. The spare tire on the door may have a locking lug nut which requires a key to unlock before removing the lug nuts. Key us usually on the ignition key ring. Remove the lug nuts and put tire on the drivers side. Tighten up the nuts on the wheel and after the car is let down from the jack, finish tightening the lug nuts.

Oct 24, 2009 | 2004 Honda CR-V

1 Answer

Rear tire lug bolts


You have to remove the tire/wheel assy. remove the brake drum, you will see the spindle with the bolts there. punch out the broken bolts install new buy pushing thru the hole.Find some regular nuts that will fit over the stud, put your new nuts on and tighten up till flush in back.

Jun 07, 2009 | 2003 Chevrolet Cavalier

2 Answers

How to change the tire


First off did you Know this ?????

Make / Models : Model/Build Years:
GMC / 1500 2004
Regency / Chevrolet 1500 2004
MANUFACTURER: General Motors Corp.
NHTSA CAMPAIGN ID Number : 04V240000 Recall Date : MAY 14, 2004
COMPONENT: Tires: Temporary/Emergency Spare Tire
Potential Number Of Units Affected : 285
SUMMARY:
The spare tire and wheel assembly that was provided on certain conversion vehicles will not fit on the front wheel hub due to offset of the wheel. However, it will fit on the rear wheels.
CONSEQUENCE:
If someone has a flat tire on the front wheel, they will not be able to install the provided spare tire.
REMEDY:
Dealers will install a spare wheel with the correct offset. Owner notification began on June 11, 2004. Owners should contact Regency at 1-800-989-4727.
NOTES:
Customers can also contact The National Highway Traffic Safety Administration's Auto Safety Hotline at 1-888-DASH-2-DOT (1-888-327-4236)

SPARE TIRE is Under rear of truck use Long Cranking in HoleClose to Lisence Plate to Lower it Down Cranking Counter Clockwise. Wing in center of Wheel pokes thrugh Hole in Center of wheel
Reverse Procedure to Put old tire in Tire Storage Compartment

  1. Locate Jack & Wheel Lug Nut Wrench
  2. There is Directions as to where to placse the Jack for raising Truck Where Jack is Located
  3. Set Park Brake Chalk tire if possible & Hazard lights (If on the Roadside)
  4. Loosen all Wheel Nuts on said wheel before Raising Vehicle
  5. Place Jack In Recomended Placment spot
  6. Rear is Normaly on Axel close to Shock
  7. Front is Normaly on FRAMERAIL
  8. Raise vehicle untill tire is 3-4 inches off ground as Flat will Lower vehicle
  9. Remove All Wheel Nuts And Wheel
  10. Place new wheel/tire on Vehicle and start all nuts
  11. Tighten nuts as tight as Possible then Lower Vehicle Untill tire touches ground Good
  12. Now Toque Wheel Nuts as tight as Possible with hand tool
  13. Lower vehicle all the way down
  14. Put away tools and Reliece Park Brake
  15. Torque should be around 100-130 foot Pounds

I Hope this is What You Wanted Its Off the Cuff as My Reference Books done have this Procedure.


Jan 26, 2009 | 2004 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...