Question about 2002 Chevrolet Malibu

1 Answer

I cant figure out how to set the time - 2002 Chevrolet Malibu

Posted by on

  • mundylmyers Sep 27, 2009

    i don't have one

  • yadayada
    yadayada May 11, 2010

    CHECK THE OWNERS MANUAL.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,081 Answers

Setting the clock on a 2002 Chevy Malibu

  1. First, locate the H and M buttons located just below the tuner knob (the lower of the two).
  2. You press AND hold either one of those buttons for a few seconds until it beeps, or the numbers are flashing.
  3. You can then use the H button to set the HOUR and M button to set the MINUTES.
  4. To finalize your time selection, just wait 10 seconds or so and the flashing should cease and your clock is SET!
  5. If it does not set after waiting, just press the POWER button to activate the radio and it will finalize the clock settings.

Posted on Sep 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When setting the timing marks together distributor always points to #6 not #1 put new timing chain & gears in but cant get it timed right 5.2


Is it possible to turn the distributor shaft 180 degrees and reinstall the dist ?
I am assuming you have spark at the plugs, just not at the right time ?
If the distributor has not been moved, and the rotor points to the wrong wire, you could have put the cam gear in upside down ?

Jul 01, 2012 | Dodge Cars & Trucks

1 Answer

I am replacing the timing belt on a 97 sportage DOHC and i cant figure out were to set the marks at


There are marks on the cam gear and the head to line up when the cover is off. And the lower end the marks are on the timing cover.

Nov 15, 2010 | 1997 Kia Sportage

1 Answer

I can't figure out how to set the timing on my 05 hyundai santa fe, dual overhead cam 2.7l


Thats beacause you cant. The timing is computer controlled. If the timing was an issue you would havea code indicating it.

Apr 06, 2010 | 2005 Hyundai Santa Fe

1 Answer

I cant figure out how to change the time on my clock, I have tried just about anything i can think of but I am not able to figure it out.


Radio off.Push the set button and then before the set light goes off use the seek and scan buttons to change the hour and minutes.If this is a factory radio.This is how you change the time.Hope this helps.Good luck.

Feb 02, 2010 | 1993 GMC Sierra

1 Answer

How do you set the timeing i have a timeing light


What engine do you have? If it wont start, you cant check the timing. What makes you think the timing is off? If your car doesnt have a distributor, you cant adjust the timing. If it wont start you need to figure out if it has spark, fuel, and compression, one is missing.

Dec 18, 2009 | 1989 Chevrolet Cavalier

1 Answer

Cant seem to get timing right after changing head gaskets. Someone previously replaced the timing belt in it and made their own marks and it is causing difficulty for my mechanic. Anyone know where th


What motor and year? If it is the Ej 25 DOHC all the marks are on the cam sprockets except the crank is marked in the block almost straight up, Just a small notch. Good luck and hope this helps. Have a good day.

Apr 24, 2009 | Subaru Forester Cars & Trucks

1 Answer

Where should the top timing mark be set on a 1986 dodge ram d-50?


timing marks are small dots on the crank and cam they must face eachother top on is at 6 oclock the bottom is at twelve use a can of brake clean and clean the cam and crank if you still cant find it pull your number one spark plug make sure the piston is up and you roter is facing the number one plug wire they lookn for your mark

Mar 25, 2009 | 1986 Dodge Ram 50

1 Answer

Cant figure out how to set timing


is this a 1.8 sohc or a 2.0 dohc let me know and i will tell you

Dec 27, 2008 | 1992 Eagle Talon

Not finding what you are looking for?
2002 Chevrolet Malibu Logo

291 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...