Question about 1996 Mitsubishi Montero Sport

2 Answers

AUTOMATIC TRANSMISSION SHIFTS BUT DOES NOT TRANSFER POWER

I HAVE A AUTO 96 PAJERO THAT SHIFTS INTO DRIVE AND REVERSE BUT DOESNOT MOVE ANY SUGESTIONS

Posted by on

  • chris quammen May 11, 2010

    does emergency brake work?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 64 Answers

Check the oil level of the gearbox while the car is idling. if the oil level is to low it will give you those symptoms. If the oil level is on its mark it might be that the clutches in the gearbox that is slipping

Posted on Oct 06, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check transmission filter

Posted on Mar 04, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Want shift into. Hi gean


i take it is a automatic check gearbox transmission fluid or the torque converter may be at fault

Jan 24, 2016 | Cars & Trucks

1 Answer

Car will not drive forward or reverse after shifting.


Make sure the shift cable hasn't come loose from the mechanism on the transmission and that it's moving as it should when the shift lever is being moved.

Feb 19, 2015 | 1993 Mercury Tracer

1 Answer

Automatic transmission


get a diagnostic code read at like pep boys for free, maybe the CPU

Mar 16, 2014 | Toyota Camry Cars & Trucks

1 Answer

My '96 Ford Escort (automatic transmission) cranks and idles fine it will shift and move well in reverse but when i shift down to drive it will buck and stall. Could this be a motor mount issue?


check fluid levels and add if low.. look for contaminates in fluid.. sholud be reddish color instead of brownish.. may need trans fluid/filter change..

Dec 15, 2013 | 1996 Ford Escort 4 Door

1 Answer

My 96 Buick Century (automatic transmission) has trouble shifting in reverse (I have to shift back and forth for about fifteen minutes until it will go in reverse). It also has trouble shifting into drive...


Transmission filter may be plugged. If it is, that indicates wear parts are worn out. Transmission needs to be rebuilt. The transmission control module can cause the problem as well as shift solenoids inside the transmission. No simple fix. You'll have to go inside.

Apr 15, 2017 | Cars & Trucks

1 Answer

96 probe will not stay in place when in park, will not reverse or drive


sounds like the cable shift has come apart but without my head under the bonnet i honestly couldnt say ,never knew they made a auto version of this car as never seen one here

Mar 02, 2012 | 1996 Ford Probe

6 Answers

Mitsubishi Pajero Junior Automatic Gearbox Problem


I have a pajero junior 1997 4A31, I am having problems, with my gear, when take off in D the car is slow, and up hill no power in 2nd & D, in Load ok. Plse advise. Thank you.

Apr 01, 2009 | 1990 Mitsubishi Minivan

1 Answer

Pajero IO (auto) Super select 4WD-i problems


Check Linkage for the 4WD transfer case, between the shifter and the case. if it is a direct case mounted shifter, you may need to remove it and check for obstruction.

Have you tried to shift it to 4H while at a slow roll in N? Sometimes that used to work for me in my older floor mount 4WD truck. Give it try!

Feb 27, 2009 | 1999 Mitsubishi Montero

1 Answer

Mazda 92 B2200 Auto Pickup Will not shift from Park to Drive


I'm going to go out on a limb and guess that when you park the car, you pull up the hand (park) brake, shift from drive straight to park and then take your foot off the foot brake and the car moves slightly as it transfers the weight of the car from the foot brakes to, in your case, the transmission rather than the park brake.
Most people do.

When you do this, you're usually putting the weight of the car onto a small lever engaging notches on the drive shaft in the transmission, not the hand brake. The hand brake's designed to hold the car, the lever isn't, it's there just-in-case.
Take a look at http://auto.howstuffworks.com/automatic-transmission5.htm to see how flimsy this part is.
  • To fix the problem, you'll probably have to get this part in your transmission replaced. Fortunately it's the least significant part of the transmission so don't let them shaft you just because it's part of an automatic transmission.

  • To fix what caused the problem, you need your hand brake / park brake adjusted at the handle. You'll probably find that it adjusts at the other end (inside the rear wheel hubs) whenever you reverse.

For what it's worth, to avoid doing this damage to automatic transmissions whenever I'm stuck in one, I shift to Neutral then take my foot off the foot brake, then the car moves as it's weight shifts from the foot brake to the park brake which I often haven't pulled hard enough. Only when, in neutral, the car is stationary without the foot brake do I put it in park.
In Australia, it became illegal a couple of years ago to not be in the driver's seat when the engine's running. My understanding is that this was because, when the engine's running, sometimes older Automatic transmissions damaged in this way can shift out of Park. This is believed to be what has happened when you see unoccupied cars reversing in circles on "wildest police video" programs on TV. I also heard of some Borg-Warner automatic transmissions fitted to 80s model Ford Falcons (common in Australia), 70s model German saloons, which were particularly prone to Park failing to hold the car on a slope. I drove one for many years in a '75 BMW 528 in which some of it's other drivers developed the same habit.
Similarly, in my own car, I don't take my foot off the clutch until I've taken it off the brake without the car moving. Though the local Road & Traffic Authority regulation states "First gear if you're facing uphill, Reverse if you're facing downhill" I do the opposite because whatever damage might be done to panels will be cheaper than what would be done to the engine if the hand brake failed and it's not going to make much difference in slowing down a rolling car, especially with this one.
Mazda BA Astina V6.

Jan 31, 2009 | 1992 Mazda B-Series

1 Answer

1990 Suzuki Escudo 4 wheel drive


As far as I know the procedure should go something like this...

Stop the vehicle, engage the parking brake and if applicable, get out and turn the hubs on the front wheels from Free, to Lock.(You may not have these on a Suzuki, they may be auto-lockers)

Get back in the vehicle and put the transmission shift selector into Neutral.

If you have a manual transfer case, move the selector-shaft to 4x4-High, or 4x4-Low -- whichever is desired. Now, putting the vehicle in gear with the transfer case is sometimes somewhat difficult. As long as the vehicle's transmission is in neutral, don't worry, the gears inside the transfer case are big and beefy -- Don't be afraid to be rough -- Again as long as the transmission is in neutral. You may also have to disengage the parking brake and slightly let the vehicle roll forward or back with your foot-brake to get the Transfer case to lock into place.

Once 4x4 of the selected High, Or Low range is selected, usually indicated by the vehicle jerking slightly with a slightly loud clank/thud. Move the Transmission selector out of neutral into your desired gear (Drive if Automatic, if Manual, whichever gear you pull out from). and voila! You should now be in 4-Wheel-Drive.

To disengage 4-Wheel-Drive. Just reverse the steps.

May 16, 2008 | 1990 Suzuki Sidekick

Not finding what you are looking for?
Cars & Trucks Logo

737 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...