Question about 1992 Toyota Tercel

1 Answer

When replacing the water pump on my 1992 Toyota Tercel Engine type 3E-E, should I also replace the O-ring?

Posted by on

  • Joe Sep 27, 2009

    I guess I need to be more specific...when replacing the water pump, a metal tube on the back of the water pump housing came out of the housing. I put the tube back in, but it is leaking now. Is there an O-ring in this tube? If not, any ideas how to stop the leak?

    Thanks!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 299 Answers

Yes when replacing a water pump you need to replace all seals,gaskets and o-rings

Posted on Sep 27, 2009

  • Eliezer Miller Sep 27, 2009

    if there is an o-ring it will usually come with the new pump if not you must seal that tube with rtv silicone and let is dry for three hours

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace water pump toyota tercel 1993


Sounds like something damaged the engine block.

Sep 08, 2014 | 1993 Toyota Tercel

1 Answer

Fuel pump cut off switch


yes a universal cut out is simply a relayed switch thats tapped into the fuel pump wiing to turn off pump lot of people use to use them as an anti-theft deterrant

May 24, 2013 | Toyota Tercel Cars & Trucks

1 Answer

How to tork the heads on a 1990 Toyota tercell?


Here is a picture of the torque sequence. First pic is for a 3A and 3A-C engine. Second one is for a 3E and 3E-E engine. Your federal emission sticker under the hood will tell you which one you have.

3A and 3A-C: torque in sequence in 3 steps. first to 14 Ft Lbs. Second pass to 30 Ft Lbs. and final pass to 43 Ft Lbs.

3E and 3E-E: First pass 22 Ft Lbs. Second pass to 36 Ft Lbs and final pass turn each bolt an addtional 90 degrees.


chuckster57_36.gif
chuckster57_37.gif

Apr 24, 2011 | 1990 Toyota Tercel

1 Answer

Need to remove the water pump


Hope this helps, it it does please leave feedback and vote Thank You and Good Luck


WATER PUMP REMOVAL
  1. REMOVE RH ENGINE UNDER COVER
  2. DRAIN ENGINE COOLANT
  3. REMOVE GENERATOR (See page CH-8)
91329747


  1. REMOVE INTAKE MANIFOLD STAY
  1. REMOVE WATER INLET PIPE
(a) Disconnect the following hoses: 91329748


(1) Water inlet hose (2) Heater inlet hose (3) Water bypass hose 91329749


(b) Remove the bolt, water inlet pipe and 0-ring.
  1. REMOVE OIL DIPSTICK GUIDE AND GENERATOR ADJUSTING BAR
(a) Remove the oil dipstick. (b) Remove the mounting bolt of the dipstick guide clamp and generator adjusting bar. 91329750


(c) Pull out the dipstick guide. Plug the guide installation hole of the oil pump. (d) Remove the 0-ring from the dipstick guide. 91329751


  1. REMOVE WATER PUMP
    • Remove the bolt, 2 nuts and water pump.

Jan 02, 2011 | 1992 Toyota Tercel

2 Answers

What is blink code 22 for a 1992 tercel


Code 22 is the Water Temperature Circuit Open or Shorted.
Fig. 1: Trouble codes for 3E engines
85994111.gif
Fig. 2: Trouble codes for 3E-E engines 85994112.gif
Fig. 3: Trouble codes for 3E-E engines 8599412a.gif
prev.gif next.gif

Nov 07, 2010 | 1992 Toyota Tercel

1 Answer

Where is the thermostat located on a 1990 toyota tercel 5dr hatch? 3E engine


follow top hose from radiator to engine thermostat is located in the housing the hose connects to engine

Nov 02, 2009 | 1990 Toyota Tercel

1 Answer

I need to know timing alignment mark to align camshaft on 91 Toyota Tercel with SOHC 3E engine.


the camshaft has a pin on the pulley side that should be at the 12:00 position and the #1 piston valves should all be closed.

Jul 28, 2008 | 1987 Toyota Tercel Liftback

Not finding what you are looking for?
1992 Toyota Tercel Logo

Related Topics:

449 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...