Question about 1998 Toyota Corolla

1 Answer

My 1998 corolla after cleaning the motor it start to failed like a spark problem.i chang the sparks but it continuos when is on drive or reverse mode

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,187 Answers

You may want to inspect the distributor or the ignition coil. Check the seals. If you can remove them and have the internal inspected. Water may have come in.

Posted on Sep 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my 1997/98 Toyota corolla 1600 twin cam ruby red collection won't start?


Is fuel reaching the cylinders? Check for weak spark and try a new igniter? Crankcase sensor operative? Compression? Air?

Aug 21, 2016 | 1998 Toyota Corolla

1 Answer

Why did car die while driving on Interstate and will not start back up


When the engine dies all the lights on the dash should come ! It's when the engine is still running an those lights come is when you need to worry ! You need to check for spark an fuel pressure. If no spark probably an ignition module , crankshaft position sensor or distributer module , what ever ignition system it has. If there is spark spray some carburetor clean into the engine , if it try's to start you have a fuel delivery problem , fuel pump , relay ! No Start Diagnostic Basics EricTheCarGuy

May 09, 2015 | 1998 Toyota Corolla Sedan

1 Answer

1997 geo prizm not starting getting too much gas


cranks fast but will not start.

which engine?

ever do a full tuneup on it, the 60k mile service (interval)

????????????

this engine really is a toyota corolla.

getting too much gas
what does the mean,?

spark tips soaking in fuel.

fuel dripping out exhaust ports to ground?

what?

if flooding did you crank wide open throttle yet, (per oper. guide ins)

????????????

this is called super secret unflood mode, it cuts fuel cranking,

all cars, do that.

this should be your engine, to fix engines, know what you have.

late 1997 change.?





1.8 L 1ZZ-FE (LV6) I4 (gasoline)




DOHC 4valve.

chain cam.



here is the secret to running.



  1. 12vdc power to all EFI parts. electric power over 10v.


  2. good compression over 150psi all 4 cyl. (new timing belt?)


  3. tuned-up and hot spark timed right.


  4. good fueling. not to rich or too lean.


  5. EGR not stuck open, clean it. or ISC stuck closed, clean it.




The ECU works overtime to start and sustain running.

so it failed. this means something is very wrong.



check engine light on key on,? if not fix that.

then connect scan tool and crank for 5 seconds.

got CMP/CKP or spark errors DTC , any at all?

or scan RPM at 0 cranking?

bingo.

scan the ECU. 1st after checking all fuses.



tuned up,, that is 1st.

if car as VVT-t , option it can fail and cause retarded timing and hard starts.

see the valve cover, here. got VVT-I? I think you dont have this motor.

http://en.wikipedia.org/wiki/Toyota_ZZ_engine#1ZZ-FE





i think you have this

1993-1997 Geo Prizms were powered by the 4A-FE or optional 7A-FE engine.



as you can see ,knowing what engine is in your car is everything.



4a/7a engine is a belt drive cam.

so did you skip the belt service, ?



if you let it slip, it will not ever start.

the 7a motor will bend its valves, if the belt is ignored.

it is a DOHC , interference engine. so....





the service schedule for the 7A is. 60k on belt

spark plugs and filters

dizzy (distributor engins) new cap/rotor and spark wires too.

Mar 02, 2014 | Geo Prizm Cars & Trucks

1 Answer

1998 blazer 4.3 v6 continuos code p0306 miss fire changed injector checked wiring etc.any ideas


If you are getting spark and fuel the inly thing left is compression. You need at least 80 pds to fire.

Mar 26, 2010 | 1998 Chevrolet Blazer

1 Answer

2000 toyota corolla ce motor trembling when on drive holding down brakes.


check the brake disks. surface should be cleaned. also check the brake pads.

May 20, 2009 | 2000 Toyota Corolla

1 Answer

1998 plymouth breeze won't start


I guess my problem was the new crank sensor has failed.
Replace crank sensor again , it has fixed the problem.
Not too sure if this was any help or not.

Mar 20, 2009 | 1998 Plymouth Breeze

1 Answer

Wont start


check the HT coil wire or the electrical connector on the coil.

Jan 07, 2009 | 1998 Toyota Corolla

1 Answer

Spark plug wiring


The coil have these number 1,4,3,2 these are the cylinder number and the number 1 cylinder spark is the first of the left when you are in front of the car trunk the secuency is continuos in the motor from left to right 1,2,3,4.

Dec 20, 2008 | 1998 Hyundai Elantra

1 Answer

Corolla 96 motot starts to cut and/surge in and out


firstly remove the inlet fuel line at the filter and and blow down line with a compressor ,removing fuel cap first,if this doesnt work then it could be fuel pump pressure of air flow meter ,but iam often wrong with this sort of thing and it turns out to be the radio,all joking aside try blowing out fuelline doesnt work??then take it to dealer for computer check

Nov 12, 2008 | 1996 Toyota Corolla

1 Answer

1999 Corolla Cutting out and backfiring


misfires can be lean/rich conditions at 1 cylinder only ..or spark or mechanical issue...sooo....compression/leakdown test to determine health of mechanical rotating parts ...valves pistons timing......timing belt......vacuum leak at intake manifold affecting mostly one cylinder...or no/intermittent spark to one area...coil/igintor wire plug ..read plugs... the misfiring cylinder will be different looking

Oct 15, 2008 | 1998 Toyota Corolla

Not finding what you are looking for?
1998 Toyota Corolla Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...