Question about 2003 Chrysler PT Cruiser

1 Answer

Sensor lights come on when brakes aplyied, then goes off. had the brakes checked and were o.k.? had the oil changed and the oil sensor light comes on when starting the car for the first time, turn off the car restart immediatly and the sensor light stays off? can you help with these situations? thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Your oil pump may be worn and not putting out the proper pressure
the viscosity of the oil may not be correct
the sensor may be faulty
there may be a blockage in the lubrication oil curcuit( try an engine flush)

Posted on Oct 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

BMW 320i E90 when I drive more than 50Km and press a brake pedal at a stop sign or robot the light for low oil pressure shows but when I release the brake it goes what can be the problem?


If this light comes on you need to check oil levels and top up if necessary. If the light still does not go out, chances are you need to replace the oil level sensor.

Oct 22, 2015 | BMW Cars & Trucks

1 Answer

Dodge Caliber 2007 check engine light on/oil light on


Check the hose going to the pvc valve,could be leaking.

Jul 05, 2017 | 2008 Dodge Caliber

3 Answers

Oil light comes on when braking


Your oil pump is failing.... when your engine rpm drops (when stopping) the pump and engine rpm drop to idle..(light comes on). when you accelerate (rpm's increase) the pumps start working harder and the light goes off.... I am TRULY surprised the dealer(who did you see at the dealer???) did not know this,... THIS IS BASIC STUFF!! ... I mean 090 level mechanics...

Get the oil pump replaced immediately!!!!

Jun 06, 2017 | Cars & Trucks

2 Answers

My oil comes on when I down shift to come to a stop but goes off when foot on the gas. I also have a lifter making a noise 2001 ford escortzx2


check and change your oil, the light comes on when braking due to the sensor detecting a low amount, and goes off again when hitting the gas because the oil flows back towards the sensor,, check for the correct amount of oil in the system,, changing the oil and filter could clear the tapping lifter , if not a adjustment could repair it

Aug 18, 2011 | 2001 Ford Escort ZX2

1 Answer

I just changed my oil but the change engine oil light comes on?


Sometimes the system needs to register the new action taken. If you just changed it, give it a few driving miles and see if the light goes out. The sensor senses the carbon intake and trigger the sensor to check oil light.

Nov 28, 2010 | 1997 Cadillac Eldorado

1 Answer

Oil light comes on when brakes are applied. goes off when they are released


Sounds more like an electrical problem. Check for burned out brake light bulbs and low brake fluid which might be the actual problem being reported by the car. If that does not work, check your oil level, could be missing a quart. And if that is not the problem try unplugging the oil sensor unit and go for a test drive:if it does come on again this would confirm an electrical issue.

Nov 15, 2010 | 2004 Chrysler Concorde

1 Answer

Oil light comes on when break then goes off


The oil light indicates that the engine's oil pressure has dropped below the minimum safe pressure. When the light goes out it suggests that pressure has been restored to a sufficient level for engine lubrication but this is nevertheless a bad sign.

I suspect that the oil level in the engine is too low and that the oil itself has greatly deteriorated and has not been changed for some time.

1. Check the oil level again, after the car has been standing for a few minutes, and make sure the engine oil level is at the maximum mark on the dip stick. If not then top it up.

2. Have the oil (and oil filter) changed in the car as soon as possible and ensure it is the correct spec viscosity oil for that engine .

3. Brake test the car to see if the oil light still comes on under braking.
If it recurs you need to have an oil pressure gauge hooked up to the engine (by an auto repair shop) to see what oil pressure is being achieved at various engine revs. If an independent gauge shows no problem with oil pressure then I would assume a faulty oil pressure sensor.
If the pressure gauge identifies a lower than normal oil pressure in the engine's lubrication system then the cause needs to be identified and fixed.

Sean

Dec 22, 2009 | 1998 Chevrolet Cavalier

1 Answer

2004 Chev Epica - oil light comes when car comes to a stop


the oil light is coming on due to sensed low engine oil pressure, this is not a level issue unless u are about 3 quarts low, oil pressure indicators don't leave any computer codes, so who ever told u that is wrong, u need to test the oil pressure with a mechanical gage when the oil light is on, until U need to confirm that u don't have a real pressure issue here or you can burn out the engine bearings, if the pressure checks ok then rplace the oil pressure light sending unit in the engine.

Dec 14, 2009 | 2004 Suzuki Verona

1 Answer

2006 Dodge Durango Oil light comes on


It might be faulty oil pressure sensor or bad oil pump, but might be adressed to recent oil change. Sometimes oil get viscouse in winter and cause oil light to come on. For winter the recommended one is 5W-30
Oil light should come on for less then a second during starting the car. If it comes longer or when you push the brake it might be the sign of bad oil (sometimes), faulty oil pressure sensor (mosty), bad oil pump (often) or internal engine problem (very rare).
Good Luck

Feb 24, 2009 | 2003 Dodge Durango

2 Answers

01 gmc sierra how to reset change engine oil light


Turn on the ignition switch without starting the vehicle and mash the accelerator to the floor 3 times slowly and this should reset the change oil sensor.

Jan 30, 2009 | 2002 GMC Sierra 2500HD

Not finding what you are looking for?
2003 Chrysler PT Cruiser Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75824 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...