Question about 2000 Hyundai Elantra

1 Answer

Wont go forward or backwards

My elantra runs but wont go forward or backwards

Posted by on

  • carhob May 11, 2010

    did u check fluid level in tranny?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,280 Answers

Whenever the 'CHECK ENGINE' (Service Engine Soon) light comes on, the ECU (Engine Control Unit) sets a Diagnostic Trouble Code (DTC). These codes identify the particular engine management system which caused the light to come on.
You'll need to use/find an OBDII (On-Board Diagnostic) Scanner to retrieve any code which have been stored in the ECU computer. Afterward, we might be able to help you DIAGNOSE the problem and perhaps eventually fix the problem.
Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.Take/Tow your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.

Posted on Oct 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 hyundai elantra goes in2 reverse but won't go backwards all other gears r perfect


Most automatic transmissions have a separate belt for reverse and all forward gears, The reverse belt is commonly lighter duty that the forward belt (some Chryslers were affected so much it was advised to not shift into reverse until the engine had warmed up and the automatic choke idled down) Thus your car would be in "reverse" but with no motion getting to the gears.

Jun 04, 2016 | 2001 Hyundai Elantra

3 Answers

Can not back up or even push it backwards in neutral running or not.


The right rear brake on my Granddaughters car was so worn that the pad jammed when turning backwards stopping any backwards motion. When going forward it did not jam and could be pushed or driven forward. Tell everyone that if you hear scraping noises when applying brakes to get them checked right away.

Dec 28, 2015 | 2005 Chevrolet Chevrolet TrailBlazer EXT...

1 Answer

My front drivers side seat wont move forward or backwards. seat stuck close to steering wheel


need to check under the seat or even remove the seat if you cant see the problem. there is a wire that breaks connecting the two rail releases. find the wire and reconnect it

Feb 12, 2015 | 2000 Hyundai Elantra

1 Answer

My saab 900 is stuck and wont go forwards or backwards but the gears aer moving help


1-clutch
2-broken axle or c/v joint
3- transmission failure

Mar 13, 2013 | 1999 Saab 9-5

1 Answer

Hyundai elantra diesel wont start. the immobilser


i have a hyundai elantra, 01, diesel. it was running grand, i knoch it off for an hour, came back, try to start the car, but no way would it start. what is wrong with it

Feb 28, 2010 | 2001 Hyundai Elantra

2 Answers

2000 Hyundai Elantra: Where is the Transaxle Range Switch?


Transaxel range switch is on top of the transmission forward (radiator side).

Jun 22, 2009 | Hyundai Motor 2003 Elantra

1 Answer

Door window mechanism


It should be held in place with a screw/screws and once you have these loose you will need to disengage it from the retaining clip by moving it either backwards or forwards. There may be some rods to unclip and from there is should pull otu. It may take a tiny bit of effort. You should not have to take the door panel off to do this.

Jan 22, 2009 | 2000 Hyundai Elantra

2 Answers

Trying to replace alternator on 2003 elantra


After you have disconnected the alternator. You can remove it through the bottom of the car. First you need to unscrew 2 bolts above wheel well that holds the bracket with the shock absorber and coil spring. After the assembly is dropped, you can sway the drive shaft forward and backward. Moving the drive shaft forward will allow you to work the alternator out. Good Luck, CM

Jul 23, 2008 | Hyundai Elantra Cars & Trucks

Not finding what you are looking for?
2000 Hyundai Elantra Logo

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...