Question about 2006 Nissan Quest

1 Answer

2004 nissan quest power steering leak - 2006 Nissan Quest

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 770 Answers

Determine where the leak is coming from. Is it the rack, a hose, a connection, the pump? Most common would be a hose connection. Under normal circumstances, the hoses would not yet be cracked on an '04. The rack also has posed some problems with this vehicle, especially if it has been frequently operated on dirt roads, or dusty, grimey conditions. If the problem is with the rack, you can get a rebuilt rack to install, yours is rebuildable, but if you are not versed in this, it may be better to leave the rebuilding to the experts...but first order of business, find the leak, then we can better deal with the problem.

Posted on Sep 27, 2009

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 30 Answers

SOURCE: replace control panel on 2004 nissan quest

there is a c-clip you need a small screwdriver to pull it out then gearshift knob will pull off

Posted on Jan 28, 2009

  • 7353 Answers

SOURCE: 2004 Nissan Quest-Hard to steer when turning.

Is the belt tight? slipping?

Posted on Nov 10, 2009

SOURCE: my 2004 nissan maxima has a bad power steering

You must look from the power steering pump,then from the pump you will find pipes that run to the steering follow the pipes you must see the leaks.

Posted on Jan 23, 2010

SOURCE: 2004 nissan quest DTC P0507. Can't get IAVL to

Have the car re-learn the larger amount
of air volume that the modification creates, here is the procedure for doing this. It's
similar to the ECU clearing procedure:
1) Drive the car to "warm up" temperature. Make sure your idle is close to 700 rpm.
2) Ensure any battery draining devices are off. Ie. headlights, interior dome lights, HVAC,
stereo.
3) Turn the car ignition key to "OFF"
4) Wait ten seconds
5) Turn the key to "ON" (not start)
6) Wait three seconds.
7) Perform the following five times in five seconds or less. Fully press the gas pedal and
release.
8) Wait seven seconds from last of the five releases.
9) Fully press the gas pedal and hold down. Within ten seconds the "Service Engine Soon"
light should begin to blink.
10) Wait another ten seconds (while still holding the gas pedal) and the "Service Engine
Soon" light should stop blinking.
11) As soon as it stops blinking, release the pedal, start the car and check the idle
(should still be around 700 rpm)
12) Let the car idle at 700 rpm or so for about 25 seconds, rev the engine a few times and
then let it return to idle.
13) Shut the car down.
You car has now relearned the new air volume, which should be different than it was
(stock). You may notice a bit of a rough idle for the next 20 miles. This is normal and
will go away. The reason you should make sure idle is around 700 rpm (full warm up) is
because the car measures the air curve in relation to idle, so you don't want to confuse
it.

Posted on Feb 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nissan quest power steering


The pump may have failed or you could have a restriction in the pressure line.

Jan 22, 2014 | Cars & Trucks

1 Answer

How do i access the area to change my power steering hose on 2004 nissan quest


how do i access the area to change my power steering hose on 2004 nissan quest

Feb 24, 2013 | 2006 Nissan Quest

1 Answer

I have a leak -looks like transmission fluid- can't find where it is coming from. 2004 nissan quest


put a clean cardboard sheet under the vehicle and keep an eye out for where the leak falls from.. follow up from that spot until you see the fluid itself..sometimes its hard to see but if you use a strong flashlight you may see better..it will look brownish or brownish-red in color..if its black then its motor oil...if its clearer then it may be brake fluid or power steering..

Feb 24, 2013 | 2004 Nissan Quest

1 Answer

How to replace a high pressure power steering hose on a 2004nissan quest


parts store can give a step by step on this ask for a printout..

Feb 24, 2013 | 2004 Nissan Quest

1 Answer

Did a tune up on a 2004 nissan quest-and now it is idling up and down


You have created a vacuum leak somehow in the process of messing with it. It has to be a manifold vacuum leak, which is why it is idling up too high and then the computer shuts it down and then this cycle keeps repeating.

Oct 17, 2012 | 2004 Nissan Quest

1 Answer

2004 nissan quest no spark


Pcv hose on upper rear of intake manifold rotted through and causing a vacume leak. spray carb cleaner at mid rear of manifold and idle will drop and stall. pretty hard to replace but thats nasty nissan.

Aug 21, 2010 | 2004 Nissan Quest

1 Answer

My 2004 nissan maxima has a bad power steering leak. not sure where it is leaking. where o i start to look


You must look from the power steering pump,then from the pump you will find pipes that run to the steering follow the pipes you must see the leaks.

Jan 23, 2010 | 2004 Nissan Maxima

1 Answer

Yesterday, my 2004 Nissan Quest had the front end bushings and control arms replaced. The car still has a "knuckling" noise when I'm making semi-hard left or right hand turns. Forget about hard turns!! ...


it usually does but you have also an intermediate shaft that connects steering column to steering rack, I know those at times can cause the exact noise you describe although what you replaced usually does.

Sep 02, 2009 | 2004 Nissan Quest

Not finding what you are looking for?
2006 Nissan Quest Logo

1,248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...