Question about 1997 Jeep Grand Cherokee

2 Answers

My 97 jeep grand cherokee makes a chirping sound under front

My 97 jeep grand cherokee Laredo makes a chirping sound under the front sometimes when I first take off. The abs light stays on all the time too.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

The noise and the light may or may not be related. The noise may be the wear indicator on the brake pads touching the rotor (they are supposed to do that when brakes are worn) The abs light triggers off a wheel on the axle end. If you have a bad joint on the axle, it could be noisy and causing the wheel to not have the proper clearance to the abs sensor. You really need to take the wheel and brake assembly off and carefully inspect everything. Make sure all abs sensor wires are undamaged...it doesn't have to be at the same wheel that's chirping.

Posted on Sep 27, 2009

Testimonial: "Thanks so much, this makes sense I will have it checked out right away. I really appreciate your help."

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same issue with my Jeep 97 Grand Cherokee. Did you ever find out what the chirping sound is? My noise is comming from the engine.

The ABS light is also on. And the check engine lite comes on once in awhile indicating an error on the Catalytic. I had the Catalytic changed out but the Check Engine will come back indicating the same error in a few months.

Posted on Jun 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ok my 2001 Grand Cherokee Laredo wont stay in park


Transmission sticks in reverse- won't go into park. - JeepsUnlimited

www.jeepsunlimited.com/forums/showthread.php?...won-t-go-into-park
Jun 14, 2013 - 12 posts - ‎5 authors 2003 6 cyl 4x4 Grand Cherokee Laredo automatic- Occaionally, when shifting from REVERSE TO PARK, my Jeep will stay in reverse. Typically its ... '2001 WJ'4,0L'42RE'NV 242'380000 km'ECE Compliant' ??????????? ??? ...

2001 jeep grand Cherokee laredo - CarGurus

www.cargurus.com > Questions > Jeep > Grand Cherokee
CarGurusJan 27, 2014 - 2001 jeep grand Cherokee laredo - Just purchased a 2001 Jeep GrandCherokee Laredo and ... It starts in PARK sometimes and sometimes it won't and I have to start it in Neutral. ... Hatch shuts flush, but won't stay shut. help!

Oct 22, 2015 | Cars & Trucks

1 Answer

My 2000 jeep grand Cherokee Laredo 4 × 4 automatic makes a roaring sound from under the car and a vibration under my feet. When I shift into neutral while driving, it stops. The Trans shifts fine . Any...


A bad u-joint makes a higher frequency sound /vibration than say an unbalanced tire. If you have the v-8, you have all wheel drive and the front driveshaft is always driven. Crawl underneath and wiggle both front and rear driveshafts, if one move significantly more, you've found the culprit. Go ahead and replace all the U-joints at that point.

Feb 14, 2015 | 2000 Jeep Grand Cherokee Laredo

1 Answer

Is the #1 cylinder at the front of the engine on a 97 Jeep Grand Cherokee laredo


number one is always the further cylinder of the engine .the heads are not equal so the more in frt is the nuber one

Oct 22, 2010 | 1997 Jeep Grand Cherokee

1 Answer

I have a '97 Jeep Grand Cherokee Laredo 4.0 liter that won't idle


Check your throtle postition sensor. It monitors what postion the throtle is at and sends that info to the ecm. It will go bad and cause that problem.

Feb 09, 2010 | 1997 Jeep Grand Cherokee

1 Answer

97 jeep grand cherokee, strange pop\clunk sound


Check the front stabilizer bar and the bushings on it. It is located under the radiator with arms that bend back to each front tire.

Jan 11, 2010 | 1997 Jeep Grand Cherokee

3 Answers

CAN YOU TELL ME HOW TO USE A SLIM JIM TO UNLOCK JEEP GRAND CHEROKEE LAREDO. LOCKED KEYS IN CAR.


a slim jim is not a good ideal to be using in todays cars and trucks with airbags everywhere and wires inside doors..call a pro and if he pulls out a slim jim send him packin...there a re far better tools to use than a slim jim

Oct 24, 2008 | 1997 Jeep Grand Cherokee

Not finding what you are looking for?
1997 Jeep Grand Cherokee Logo

827 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...