Question about Hyundai Motor 1992 Scoupe

1 Answer

Car wont drive

Can lift up front end and both wheels spin wile the car is in gear

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,280 Answers

Take/Tow your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.

Posted on Oct 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed front end parts, front diff fell out . now back together and front wheels spinning opposite of rear wheels.


Drive it on the ground. See what happens. On a lift the tires can and do spin in opposite direction.

Nov 13, 2016 | Cars & Trucks

1 Answer

Possible reason why 04 chevy tahoe 4wd works up in air on lift but not on ground


the residual force makes it look like its working on a lift ,
check your wheel sensors the speed sensor determines how fast each wheel is turning say in the snow , if the sensor fails it wont go into 4 wheel drive.

Feb 19, 2015 | Cars & Trucks

1 Answer

Ford explorer 2000 all wheel drive not working


all wheel drive vehicles have to work at both ends all the time unless you have a major failure in the drive train. That is why it is called all wheel drive as opposed to 4 wheel drive. With 4 wheel drive you have the option of rear wheel drive or 4 wheel drive and normally in a high ratio or low ratio gear selection. With some all wheel drive vehicles there is a selector that locks the middle diff and creates a 4 wheel drive option without the high/low gear ratio option. So in practice if the both front wheels are in the bog then there is no all wheel drive as the centre diff is working as it should and placing all the action in the rear wheels which will not be turning as they have traction so the front wheels spin faster.. If you have a centre diff lock option ensure that it is operational.

Feb 10, 2014 | 2002 Ford Explorer

1 Answer

My four wheel drive wont engage but my light is on on my 05 nissan xterra


YOU NEED TO CHECK THE HUBS FOR PROPER OPERATION LIFT THE FRONT END TRY TO SPIN THE TIRE U WILL KNOW BY THE AMOUNT OF FORCE IT TAKES TO ROTATE THE TIRE

Sep 26, 2013 | 2005 Nissan Xterra

1 Answer

Noice


Your going to need a wheel bearing,just lift up the rear tire spin it and you will hear the wheel bearing noise3_29_2012_4_50_53_am.jpg

Mar 28, 2012 | 1998 Dodge Ram 1500 4WD

1 Answer

08 f150 4x4 on front end only one side is disengaging when in 2 wheel drive. The problem is when engaged into 4x4 wheel drive the front drive line spins and both sides engage but only the back wheels spin...


If I read this correctly ( which I might not have, bit early for me ), the front drive shaft will engage ( from the transfer case ) but the front wheels are not engaged ?

If so, sounds like either the vacuum from the IWE ( Integrated Wheel End ) is not being released, or the IWEs have had an issue with part vacuum ( damage vacuum lines ) and the IWE gear is rounded off.

If you pull the vacuum lines at the IWEs ( there are 2 lines, 1 is the vacuum line, the other is the vent tube that routes up into the engine compartment and is not attached to anything ), the front wheel should engage ( might need a 5 * turn to mesh the gears ). With the vacuum lines off, jack up the front axle ( take precautions, chock the rear wheels, parking brake, jack stands, etc ) see if the front wheels are engaged ( turning one wheel should turn the other ). The option is to do this after the truck has sat over night, and the vacuum has been released out of the vacuum reservoir.

If the wheels turn correctly ( engaged ) I would think the contact plates in the transfer case are not making contact. Good starting point for this is the connector on the side of the transfer case, some times this gets gummed up, and the pins do not make good contact. The contact plates in the transfer case are used for a few things, one of them is to signal the IWE solenoids to release vacuum to the IWEs.

Operationally vacuum holds the IWE ( Integrated Wheel Ends ) out, and once vacuum is removed the spring engages the IWE.

Here is a black diagram of the IWE vacuum system
sscullys_108.jpg

Feb 05, 2011 | 2004 Ford F150

3 Answers

4x4 front end not engaging


my computer problem is hard disk system found warantty hard disk

Feb 24, 2010 | 2006 Ford F-150

1 Answer

Noise in front end 2002 zr2 blazer


Two things maybe your problem:1 .Front axle actuator to engage 4wd is not releasing. 2. Front axle u-joint needs replacing. Lift car on jacks with front end off ground. Then spin tires by hand as fast as you can and see if you hear the noise and where it is coming from ( spin in both directions).

Feb 04, 2010 | 2002 GMC Sonoma Extended Cab

1 Answer

4 wheel drive wont engage to front end drive shaft is turning and actuator is moving


acuator at transfer case or at frt diff if acuator is moving then axles to wheels should be turning and you may have a hub locking problem. if axles to wheels dont turn then the acuator tofront diff is no good not strong enough or bent shaft on acuator, some of these use a small shaft in front of actuator also make sure if this truck use this shaft check it for wear, lift truck remove actuator push inside arm in see if wheels spin turn frt shaft while holding arm in wheel should turn is they do, replace actuator, if they dont turn then diff problem,

Dec 06, 2009 | 1990 Chevrolet K2500

1 Answer

Rear scraping sound, Also when placed on lift and in gear (all wheel drive) the rear left wheel does not spin


Take it in for proper diagnosis - that's not supposed to happen in an 'ALL WHEEL DRIVE' - all WHEELS ARE SUPPOSED TO TURN.

May 20, 2009 | 2004 Hyundai Santa Fe

Not finding what you are looking for?
Hyundai Motor 1992 Scoupe Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...