Question about 2004 Ford Explorer

1 Answer

I need to know how to change the front interior lamp bulbs on my 2004 explorer. I can not get to clear plate off.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 23 Answers

Open the hood in the engine compartment and look where the lights are should be a little like knob u can turn . if not u have to buy the whole light assembly

Posted on Sep 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change license plate bulbs in 2004 buick lesabre custom


  1. Disconnect the tail/back up lamp harness connector from the from the body wiring harness.
  2. Remove the tail/back up lamp assembly from the rear compartment lid.
  3. While supporting the tail/back up lamp assembly, unplug the tail/back up lamp harness grommet from the rear compartment lid and remove the tail/back up lamp from the vehicle.
  4. Remove the license plate lamp bulb from the lamp housing.

Sep 22, 2014 | 2004 Buick LeSabre

1 Answer

Change license plate lamp bulb 2004 Mitsubishi endeavor


there SHOULD BE AT LEAST TWO SCREWS HOLDING THE LICENCE PLATE LENS IN PLACE .REMOVE THE SCREWS AND PULLTHE BULBS OUT,THEN PUT (NEW BULBS)IN PUT IT BACK TOGETHER,MAKE SURE THE NEW BULBS WORK BEFORE PUTTING IT BACK TOGETHER

Feb 26, 2014 | 2004 Mitsubishi Endeavor

1 Answer

Tail light out on 2004 Ford Explorer where is the fuse


the fuse box is under the dash board on the driver side. Click on this link to look at a video Interior Fuse Box Location 2002 2005 Ford Explorer 2004 Ford Explorer...

Jun 30, 2012 | 2004 Ford Explorer

1 Answer

How do i change the license plate bulb on a 2004 tb ls


here is the instructions on how to replace license plate bulbs.

Remove the 2 screws that retain the license lamp lens to the liftgate.

  • Remove the license lamp lens from the liftgate.
  • Remove the bulb (1) from the socket.


  • 8e7cf48.gifaba90ae.gif

    Oct 11, 2010 | 2004 Chevrolet TrailBlazer

    1 Answer

    Trying to find a fuse for licsense plate lamp. I would greatly appreciate the help asap. inspection failed because of it.


    Are there any other rear lights out? If so, there is a 7.5 amp fuse which could be the issue. If not, the only 2 issues that would cause this would be, bad bulb/socket, or broken wire going to both lamps for the license plate lights. Check the bulbs first and let me know. The interior fuse block under the dash(driver's side) would be the likely location for that fuse. Let me know.

    Sep 11, 2010 | 2001 Mitsubishi Mirage

    1 Answer

    Map light fuse on 2008 f 350????


    The interior map lamps are powered buy the battery saver relay ( non serviceable relay ) Which is powered by Fuse #25 ( cab fuse panel ).
    This is for the engine compartment and illuminated vanity lamps, as well as the map lights.

    The FET ( Field-Effect Transistor ) shows the fuse #9 also on it. ( marked interior lighting ), which power the interior lamps ( door / switch ).

    Could be a few things if both those fuses are OK.

    1. The map / interior lamp combos are usually dual element bulbs, which means if the interior lamps ( door or dimer switch on headlamp panel ) are OK, it could still be a burn out bulb.

    2. The FET is having an issue from a dead short ( blown bulb or dead short to ground ). Until the short is correct, the FET will not turn back on.

    Start with checking Fuse #9 ( marked as Fuse #8 in the diagram, but that shows headlamp ), which is to the interior lamps, and drives 1 side of the FET.

    Jan 07, 2010 | 2004 Ford F150

    1 Answer

    My front interior dome light has a blown bulb. Can I change the bulb?


    lightly twist the dome and it will come off. The lamp is of a bullet type.

    Aug 02, 2009 | 2004 Ford F150

    1 Answer

    HOW TO CHANGE LICENSE PLATE BULB ON 2004 COROLLA LE


    After looking for the answer to do the same I found two sites with the same 8 step instructions.
    Here is one of the two URLS http://www.ehow.com/how_5028612_replace-license-plate-light-bulb.html
    From what I see before tearing into it this appears to be the solution though I'll know tomorrow after following it.
    Tools: 1 flathead screw driver, 1 phillips screw driver, 1 needle nose pliers
    Overview of 8 steps
    Must remove several liner clips then emergency trunk release handle to clear access then remove wiring to lamps, remove burnt bulb, replace bulb and reverse steps to put things back together. The steps tell where to gently squeeze clips or unlock clip screws and bulb with 1/4 turn twists and when to pry with flat head screw driver.
    Remember standard rule: if it feels like it is being forced then stop and look.

    Apr 08, 2009 | 2004 Toyota Corolla

    1 Answer

    1996 ford explorer license plate fuse


    I'm not to sure what one you did want license plate light or the tag light up high above your back door. I know I am reading license plate so I will say the fuse needs to be replaced. plate lamps need 2 light bulbs and the fuse box is under the steering wheel or under the hood there are 2.
    in my book it said that it is a (194 trade number), I woulds change out bulbs and then fuse.

    Jul 31, 2008 | 1999 Ford Explorer

    Not finding what you are looking for?
    2004 Ford Explorer Logo

    Related Topics:

    37 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    fordexpert

    Level 3 Expert

    5522 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...