Question about 2001 Chrysler Sebring

1 Answer

I have a 2001 Chrysler Sebring 3.0 it has started to run hot I noticed that the cooling fans dont seem to come on unless I turn on the AC is there a temperature sensor and where is it located

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 432 Answers

Your on the right track,its usually screwed into the intake manifold.Buy the new one so you can see what it looks like. Usually they are unpainted brass.
Have the new on ready to install as soon as you pull the old one out so you dont lose much coolant.Have some paper towels right at the hole so you dont make a big mess. Hand tighten ONLY until your sure you have it theaded in correctly then snug it up with a socket. You might want to put about 3 wraps of teflon tape on the new one to be sure it dont weep.
Do this with a cold motor in a shady place and dont be in a hurry.
I hope this helps you.

Posted on Sep 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 93 lexus ls400 keep turning off ever since i had a tuneup done. I notice that the ac condenser fan is not working but i dont run the ac.It doesn't read that it gets hot But it seem if the car g


Be sure you check engine oil level often. The low oil sensor will disable the ignition. If you turn A/C on the cooling fan should run continuous, Check the fan relays. Make sure coolant level is correct at recovery bottle, never open radiator cap. A scald hazard exist, be careful. This car is old and complicated, and is beyond your skill level to repair. Try to inquire here for advice, whenever possible. Don't throw good money at bad money

May 27, 2017 | 1991 Lexus LS 400

1 Answer

My 2001 sebring conv. cooling fan only comes on when i turn on a/c


ECT sensor.
Engine Coolant Temp sensor is faulty.
When motor gets certain temp, this "Plugtype" sensor is supposed to turn on fan.

Jul 12, 2012 | 2001 Chrysler Sebring

1 Answer

Runs hot cooling fan doesnot cut on


there is another coolant temp sensor that is a normally open switch. It closes when it reaches a certain temp and turns the fan on. If you are not getting 12 volts at your fan motor and your fuse is good for this circuit than you have a bad "automatic switch". that will need to be replaced

Jun 27, 2012 | 2001 Chrysler Sebring

1 Answer

2004 chrysler sebring running hot


Hello, Have you checked the coolant level in the vehicle? Also when the car is running hot do you notice if the cooling fan is coming on or not? Could also be a sticky thermostat not allowing cooling to enter the engine from the radiator. PLEASE NOTE THAT THE CAR MUST BE COOL BEFORE OPENING THE RESERVOIR AS IT IS A PRESSURIZED SYSTEM. Hope that helps.

Aug 05, 2011 | 2004 Chrysler Sebring

2 Answers

My 2001 Sebring blows hot air except when I turn the control knob to defrost, then it blows cold air and the condenser fan kicks on . Chrysler has already replaced the evaporator core and that did not fix...


If the ac is turned on and it comes threw the defrost,then it is not the cooling fans,but check them to see that they are coming on,and they are turning fast,the control head is more likely the problem.

Jul 27, 2010 | 2001 Chrysler Sebring

1 Answer

I have a 2004 2.7 6 chrysler sebring lxi. ac blows really cold and periodically just starts blowing warm air. is there a relay or temp. sensor that might be going out and through a malfunction shuts down...


Cooling fans working? If you notice the air getting warm mostly while stopped, probaby cooling fans not turning on. if the fans are working properly, may be low on freon and need a recharge.

Jun 26, 2010 | 2004 Chrysler Sebring

2 Answers

Engine overheating when ac is on


Ac fan switch is not comming on start the car and turn the ac on and see if fan comes on, if not it may be a relay sensor or a bad motor. If It comes on then look into the radator to see if there are a lot of bugs in the radiator if there is you can power wash it in reverse from the engine comparment but you would have to protect the engine.

Aug 30, 2009 | 2001 Chrysler Sebring

1 Answer

New radaitor cooling fan won't engage


check the fan relay it may be bad. if fans are not working right a/c wont work right either

May 21, 2009 | 2004 Chrysler Sebring

Not finding what you are looking for?
2001 Chrysler Sebring Logo

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...