Question about 1996 Acura Integra GS-R

1 Answer

How to install a motor and regulator in a 996 acura intergra passenger door for the window?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Acura Expert
  • 268 Answers

The motor will be on the regulator already, remove your door panel, you'll have to plug the switch back in for your window to raise/lower to access the 10mm bolts that are holding your window to the regulator. Either remove your window or secure as if it were rolled up. Remove all the 10mm and 12mm bolts in the way of your old regulator and replace in reverse of removal. Good luck, it's tedious but easy your second time.

Posted on Oct 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power window won't go up


You have to replace a broken window regulator

Go to You Tube Video & see if you can find door
panel removal

Mar 07, 2013 | 1998 Acura CL

2 Answers

How do i change the drivers side window motor an an 05 kia sedona


You have to remove the inner door panel to
access the window regulator

You remove the regulator & then the motor from it

You Tube Video will provide a visual of several
similar window motor replacement jobs

Go there-- enter your car,question ,details,etc--- then move
around the site to watch various things

Dec 09, 2012 | 2005 Kia Sedona

1 Answer

Door panel removal


There are few help links to complete this task of removing door panels.Click the link below:---

How to Access car door panel?
--------

How to remove the door panel to install a new window regulator?
http://howtobyme.blogspot.com/2011/08/how-to-remove-door-panel-to-install-new.html




----------
window motor, regulator and door panel removal?
http://technoanswers.blogspot.com/2011/02/ford-explorer-window-motor-regulator.html


-------------
How to Remove Door Panels ?
http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-door-panels-on-acura.html


---------

How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html

-------

Vehicle door panel components?

http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html

-------
This will help.
Thanks.

Jun 11, 2012 | 2002 Lincoln LS

1 Answer

How do I remove the door panels


There are few help links to complete this task of removing door panels.Click the link below:---



How to remove the door panel to install a new window regulator?
http://howtobyme.blogspot.com/2011/08/how-to-remove-door-panel-to-install-new.html




----------
window motor, regulator and door panel removal?
http://technoanswers.blogspot.com/2011/02/ford-explorer-window-motor-regulator.html


-------------
How to Remove Door Panels ?
http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-door-panels-on-acura.html


---------

How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html

-------

Vehicle door panel components?

http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html

-------
This will help.
Thanks.

Jun 08, 2012 | 2000 Dodge Grand Caravan

2 Answers

Remove door panel


There are few help links to complete this task of removing door panels.Click the link below:---



How to remove the door panel to install a new window regulator?
http://howtobyme.blogspot.com/2011/08/how-to-remove-door-panel-to-install-new.html




----------
window motor, regulator and door panel removal?
http://technoanswers.blogspot.com/2011/02/ford-explorer-window-motor-regulator.html


-------------
How to Remove Door Panels ?
http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-door-panels-on-acura.html


---------

How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html

-------

Vehicle door panel components?

http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html

-------
This will help.
Thanks.

Jun 04, 2012 | 2002 Cadillac Deville

1 Answer

How do you remove rear door panel of seat altea


There are few help links to complete this task of removing door panels.Click the link below:---



How to remove the door panel to install a new window regulator?
http://howtobyme.blogspot.com/2011/08/how-to-remove-door-panel-to-install-new.html




----------
window motor, regulator and door panel removal?
http://technoanswers.blogspot.com/2011/02/ford-explorer-window-motor-regulator.html


-------------
How to Remove Door Panels ?
http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-door-panels-on-acura.html


---------

How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html

-------

Vehicle door panel components?

http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html

-------
This will help.
Thanks.

Jun 04, 2012 | 2005 Seat Altea 1.6

1 Answer

How do you install a moter for a right side passenger side on 1987 calais


See Figures 1 and 2

0900c1528025fbec.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 1: Location of the front door window regulator-1995 vehicle shown


0900c1528025fbed.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 2: Exploded view of the rear door window regulator-1995 vehicle shown

  1. Remove the window regulator assembly from the door.
  2. Remove the motor from the regulator by drilling out the attaching rivets with a 3/16 in. drill bit.

To install:
  1. Connect the window motor to the regulator with 3/16 in. rivets.
  2. Install the window regulator assembly.

icn_arrow.gifBack to Top

Apr 30, 2012 | 1986 Oldsmobile Calais

1 Answer

I a looking for instructions on how to install a power window regulator into a 98 Acura CL


Door Glass and Regulator - REMOVAL & INSTALLATION
  1. Remove the door panel.
  2. Remove the plastic cover from the door frame.
  3. Remove the power window switch from the door panel.
  4. Connect the power window switch to the door harness.
  5. Fully lower the glass.
  6. Pull the channel guide cover off.
  7. Remove the screws from the channel guide.
  8. Remove the center channel guide (if equipped).
  9. Carefully remove the glass until you can see the bolts and then carefully loosen all of them.
  10. Slide the window track guide to the rear.
Before removing the guide pin, scribe a line around it. This will enable you to install it in the exact position it was removed in.
  1. Remove the glass by gently lifting it from the guide.
  2. The glass can now be removed by pulling it through the window slot.
CAUTION Use extreme caution when handling window glass.
Check the guide pin for wear. Replace as necessary.
  1. Detach the connector and remove the regulator through the hole in the door.
Scribe a line around the rear roller guide bolt. This mark will show where the original adjustment was at before you removed the component.
  1. Remove the power window motor from the window regulator assembly.
  2. Remove any clips and pull the glass run channel out.
It may be necessary to remove the glass stopper.

WARNING Grease all of the sliding surfaces of the regulator or component failure may occur.
To install:
  1. Install the window motor on the regulator assembly.
As a check, you can connect a known good 12 volt power source to the window motor to check the operation of the entire assembly. The regulator should operate with a steady, consistent motion in either direction.
  1. Install the glass run channel into the door as shown.
  2. Install the regulator.
  3. Install the glass.
  4. Install the center channel guide.
  5. Move the glass up and down to ensure free movement.
  6. Attach the door wiring harness to the door.
  7. Disconnect the window switch (on power controlled models) and install it into the door panel.
  8. The remainder of the installation process is the reverse of removal.


Electric Window Motor - REMOVAL & INSTALLATION
  1. Remove the regulator from the door assembly. Refer to the procedure in this section.
  2. Except for the rear doors, drill a hole through the regulator sector gear and backplate. Install the bolt and nut to lock the sector gear in position. Be careful not to drill a hole closer than 7 / 16 in. (11mm) from the edge of the sector. Also, do not drill through the lift arm attaching portion of the sector gear, or the joint integrity will be jeopardized.
  3. Drill out the ends of the motor attaching rivets using a 1 / 4 in. (6mm) bit.
  4. Remove the motor and the remaining portions of the rivets from the regulator. Except for the rear doors, one rivet will not be accessible until assembly.
(see Figures 1 and 2 / click over pic for zoom)


zjlimited_251.jpg


Fig. 1: Regulator and motor assembly-except rear doors

zjlimited_252.jpg

Fig. 2: Secure the rivets by collapsing the rivet ends using a ball peen hammer



To install:

  1. Position the new motor to the regulator. With the aid of an assistant, install new rivets by collapsing or crushing the rivet ends using a ball peen hammer.
  2. Except for the rear doors, once two of the three rivets have been installed, remove the bolt securing the sector gear to the backplate, then use an appropriate electrical source (such as the vehicle's window motor harness) to rotate the regulator, providing access to the remaining rivet.
  3. Except for the rear doors, use a flat nosed rotary file to grind off one sector gear tooth from the side which does not contact the driven gear. This is necessary to reach the remaining rivet. Remove the old rivet, then install the remaining new rivet.
  4. Install the regulator to the door assembly.


Hope this helps (remmeber to rate and comment this).

Dec 16, 2010 | Acura CL Cars & Trucks

1 Answer

Acura legend passenger windows wont go down


PASSENGER MASTER SWITCH TURNED OFF ON DRIVERS DOOR WINDOW SWITCH PANEL?????

Mar 30, 2009 | 1992 Acura Legend

1 Answer

How do i remove the passenger window in a 1994 ford probe gt?


Door Glass and Regulator REMOVAL & INSTALLATION
  1. Lower the window glass and remove the inner handle cover, door lock knob (if necessary), the window regulator handle and the door trim panel. NOTE: On vehicles with power windows, disconnect the wiring couplings.
  2. Carefully peel off the door screen so that it can be reused.
  3. Replace the window regulator handle and position the door glass so that the door glass installation bolts can be removed from the service hole.
  4. Remove the door glass installation bolts.
  5. Remove the door glass. Remove the regulator installation bolts, and then remove the regulator through the service access hole. Remove the window motor mounting bolts and separate the motor from the regulator.
  6. Installation is the reverse of the removal procedure. If the vehicle is equipped with power windows, connect the leads of the motor to a battery and run the regulator to the down position before installing the motor. Cycle the window several times to make sure that everything is in good working order.
The door glass retaining bolts can be removed through the access hole


3838624.gif

Mar 20, 2009 | 1994 Ford Probe

Not finding what you are looking for?
1996 Acura Integra GS-R Logo

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...