Question about 1992 Chevrolet K1500

1 Answer

Brake lights dont work

My brake lights wont work in my 92 pickup, but I put in new bulbs and the fuses are fine

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 142 Answers

These truck have really bad corrosion problems in the taillight sometimes you need to clean up where the buld installs and other times thats not enough and replacing the bulb housing is needed

Posted on Sep 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

92 sunbird brake lights not working


check for bad grounds,that is usually it. may look good but need to pull and clean

Mar 17, 2012 | 1992 Pontiac Sunbird

3 Answers

Brake light dont work, change bulbs, fuse, bake switch, and has power still dont work


You have a failed brake lamp relay,this is located at the back right hand in the trunk at the quater panel.

Mar 12, 2012 | 2003 Honda Civic

1 Answer

My brake lights dont work on my 92 toyota pick up


could be a number of things the fuse, the brake light switch u can locate the switch if u want 2 do it ur self is were the brake peddle is or a broken wire hope this helps

Jan 10, 2011 | 1992 Toyota Pickup

1 Answer

Toyo dyna 92 break lights not working , is there a fuse for this or is it hard wired bulbs ,work fine , ?


There is a fuse for the brake lights. Check fuse and replace if blown. If the fuse is not blown, check the bulbs themselves. If the bulbs are good, then the next step is to replace the brake light switch located under steering column attached to brake pedal rod.

Feb 16, 2010 | 1992 Toyota Xtracab

2 Answers

Turn signals work but the brake lights do not how do i get them to work? i already changed the flasher.


I have a 2001 Ford F150, my brake lights dont work. Ive replaced the bulbs, checked the fuses,and the brake switch on side of the brake pedal was replaced. I still dont have any brake lights. My third brake light works fine, along with my running lights,flashers, blinkers.

Jun 18, 2009 | 1985 Ford F150

1 Answer

Both 2003 oddyssey brake lights dont work High


clean bulbs socket out using the electronic spray cleaner for electrical connectors.

May 13, 2009 | 2003 Honda Odyssey

1 Answer

Brake lights went out, changed bulbs, checked fuse, still wont work


You have to check the brake light switch which should be around the brake pedal on the upperside.
Ones located rremove the wires tht go to the switch and jump them by using a piece of wire, thn check if the brake lights come 'on'. If they do , thn its the switch tht may need replacing or even sometimes adjusting inorder to operate.
Hope this helps.

May 10, 2009 | 2002 Nissan Xterra

2 Answers

Right brake light out; tail light works fine


most rear tail lights and turn/stop lights are the same dual filiment bulb. it is possible for your tail light to work and your brake light not to and still have a bad bulb. I would check the bulb first, your brake light works on the left yes? this would mean that the fuse is fine

Mar 31, 2009 | 2006 Dodge Stratus

3 Answers

No brake lights


First Start with the Stop lights fuse Check and make sure it's good if questionable just replace it. Check to make sure you have power going into the fuse Use a 12V test light or volt meter. If you have power going into the fuse make sure the other side of the fuse has power through the fuse. Next Go to the brake light switch and test for power going into the switch if you have power put your tester on the other wire on the brake light switch and press the brake pedal, If there is power the switch is good and if not the switch is either out of adjustment or bad.
If you have power in and out of the brake light switch with the brake pedal pressed then you have to find the breadk in the wire back to the lights Oh don't forget the bulbs and the grounds for the bulbs.

Aug 01, 2008 | 1998 Chevrolet S-10 Pickup

Not finding what you are looking for?
1992 Chevrolet K1500 Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...