Question about 1996 Chevrolet Cavalier

1 Answer

Need help with 1996 Chevy Cavalier clutch problem

Need help with 1996 Chevy Cavalier. Clutch got stuck and now won't let me get into gear. Any help with this is appreciated.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 173 Answers

HI look under car in between transmission and engine look for sign of clear fluid like brake fluid.If you don't find any replace your clutch master cylinder.

Posted on Sep 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 Isuzu hombre 2.2 manual trans is stuck in gear have removed the stick and put it in neutral and still stuck and stalls when clutch is let out


so , it seems the engine does start in gear, with clutch depressed.
or cranks , brakes off, and car does not move. with clutch depressed, if yes, then the clutch is not 100% seized.
we now know the trans is in neutral (could be siezed check its Gear lub levels?)

I can not decode, stuck in gear. elaborate that.
nor "
"still stuck"
the only clue here, is
"stalls when clutch is let out."

this last statement makes me presume you depressed the clutch
then turn the key to start, it started
and when you let the clutch out, the engine stalls
does it do that rear wheels (2wd mode) ? lift driving wheels off the ground.... (these proves engine not weak)
yes, transmission is sized.
no, then it is stuck in gear.

Nov 26, 2016 | 1996 Isuzu Hombre

1 Answer

I have a 98 Chevy cavalier , it has Manuel transmission, it will only go in 3rd and 4th gear, what could be the problem


It could obviously be the tranny is gone, but you would want to make sure you have enough clutch flood and the clutch is fully engaging. I had a leak in my 98 cavalier clutch fluid, and when it got low, it would not fully engage the clutch, simply making it hard to get into gear. Its DOT3 fluid. If so try reversing a little bit and gently tiring to get into gear. I believe 1st and 2nd gear share the same gear selection fork inside the tranny. Drain fluid and look for metal.

Feb 16, 2015 | 1998 Chevrolet Cavalier

1 Answer

How do i bleed the clutch master cylinder with a pressure bleeder on a 2003 chevy cavalier?


On those models, the slave cylinder is IN the transmission bellhousing so you can't reach it directly, but usually there is a metal hose coming out of the casing with a bleeder screw on it. So you will just need to use that to bleed the clutch, either with a pump or with a helper pumping the clutch, just like you would bleed brakes.

Jul 05, 2014 | 2003 Chevrolet Cavalier

1 Answer

How to bleed the clutch on my 2003 cavalier 2.2 ecotech


Sounds like a bad slave silanoid, should be a blender screw on slave

Jul 05, 2014 | 2003 Chevrolet Cavalier

1 Answer

99 cavalier shifts hard


try adding brake oil to the resvore on the drivers side fire wall first !But if it is out r&r on your transmision is about 385.00 plus parts

Nov 17, 2012 | 1996 Chevrolet Cavalier

1 Answer

98 chevy cavalier z24 will not shift into fifth gear nor reverse


Hey I have a 1999 cavalier z24 5spd All my gears work except 5th while puttting it into 5ht gear as i let out of the clutch its grinding so i cannto put in 5th or it will grind, but at times it would work, but recently as Ive been driving I go to put it in 5th, there isn't a grind its as 5th gear is just netural NEED HELP geoff

Jan 14, 2012 | Cars & Trucks

1 Answer

I am trying to replace the clutch in a 1996 cavalier, I have both axles off, the transaxle bolts out, the motor mount off, the pressure off the motor, I have about a 1 inch gap in the transaxle housing ,...


Remove the speedometer cable and any wiring that is attached to the transaxle.

Reattach the clutch cable and use the pedal to leverage against the clutch pressure plate, which will move the transaxle away from the engine a few inches. From there, you should be able to remove it by hand.

Don't allow the transaxle's input shaft to hang on the new clutch, it will bend it and cause serious problems.

Aug 10, 2010 | 1996 Chevrolet Cavalier

1 Answer

Clutch slave cylinder repair


easiest way to repair my clutch slave cylinder

Jan 03, 2010 | 1996 Chevrolet Cavalier

1 Answer

1996 chevy cavalier DIAGNOSTIC CODES


TCC is torque converter clutch circuit which helps tranny shift smoother and is in front off tranny.
$250
Random cyl miss. Most likely bad plug wire or faulty coil pack $45
Transmision pressure switch sends info to computer about tranny pressure and the switch controls it. $400

Aug 27, 2009 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
1996 Chevrolet Cavalier Logo

449 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...