Question about 1993 Dodge Intrepid

1 Answer

Replace lower passanger side ball joint. I could use a step by step procedure or as close to one as you can get. I've never done this but it doesn't appear to be an overwhelming task. That and I have plenty of time to get it done

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,674 Answers

If you check around at parts stores you may find out they will print you out procedures step by step, as most have them online now, when you buy the parts. You may also find out only complete lower control arm assy available too, with balljoint. Saves time & aggravation to go that way anyway.

Posted on Sep 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to change my upper ball joint. Passager side


For your problem,check out this few help links.

Click the link below to go through its procedure:----Upper Ball Joints inspection and replacement? http://howtobyme.blogspot.in/2012/02/upper-ball-joints-inspection-and.html------- How to Test Upper and Lower Ball Joint? http://repairhelpcenter.blogspot.com/2011/12/how-to-test-lower-ball-joint.html------- How to inspect Upper and Lower Ball joint? http://repairhelpcenter.blogspot.com/2011/12/how-to-inspect-lower-ball-joint.html------ How to Service Ball Joints on Car? http://repairhelpcenter.blogspot.com/2011/12/how-to-service-lower-ball-joints-on-car.html----------- How to Replace Ball joints? http://repairhelpcenter.blogspot.com/2011/12/how-to-replace-lower-ball-joints.html--------- Lower Ball Joints replacing on Mitsubishi car? http://howtobyme.blogspot.in/2012/02/lower-ball-joints-replacing-on.html
-------------These details will help.For more help,keep updated,with car brand,model and year.Thanks.Helpmech.

Oct 05, 2012 | Cars & Trucks

2 Answers

I have a '95 Chevy Silverado 2500 7.4L 2wd, I seem to be going through ball joints rather quickly. I replace them at least once a year. Is this something that is problematic with this model or is


Many other users are noticing problem issue with ball joints.Always replace original parts instead of aftermarket parts.They dont last long.--------Before replacing ball joints ,i suggest to test and inspect the ball joints:----Click the link below for its procedure:----Upper Ball Joints inspection and replacement? http://howtobyme.blogspot.in/2012/02/upper-ball-joints-inspection-and.html How to Test Upper and Lower Ball Joint? http://repairhelpcenter.blogspot.com/2011/12/how-to-test-lower-ball-joint.html How to inspect Upper and Lower Ball joint? http://repairhelpcenter.blogspot.com/2011/12/how-to-inspect-lower-ball-joint.html How to Service Ball Joints on Car? http://repairhelpcenter.blogspot.com/2011/12/how-to-service-lower-ball-joints-on-car.html How to Replace Ball joints? http://repairhelpcenter.blogspot.com/2011/12/how-to-replace-lower-ball-joints.html Lower Ball Joints replacing on Mitsubishi car? http://howtobyme.blogspot.in/2012/02/lower-ball-joints-replacing-on.html
--------This will help.Thanks.

Feb 08, 2012 | 1995 Chevrolet Silverado 2500

1 Answer

How to replace ball joints


the lower ball joint is pressed into the lower control arm. You will need a ball joint press to remove and install the ball joint. The other option is to replace the lower control arm.

Some parts store will have presses for loan. You will have to check around and see if any in your area have these. If you can't find one you could always pull the control arm and bring it to a shop or machine shop and have them swap the ball joint.

Its a pretty simple procedure.

1. remove the wheel
2. remove the pinch bolt that secures the knuckle to the ball joint.
3. separate the lower control arm from the knuckle.
4. remove snap ring from the ball joint (if it has one)
5. use a ball joint press to press out the old ball joint.
6. press in the new ball joint.

if you don't have a press than you can remove the lower control arm by following steps 1-3 above. then remove the bolt from the front bushing. Remove the stamped steel skid pan from the sub frame. Remove the rear lower control arm bushing mounting bolts.

If you have any questions I'll be happy to answer them.

Oct 13, 2011 | 1998 Dodge Caravan

1 Answer

Passanger side axle replacement. I need a step by step on this. Can you assist me please?


not for the faint of heart!!
safely jack up and secure vehicle
remove wheel
remove lower ball joint
remove big axle nut
swing spindle out of the way
pry axle out of transmission
reverse to install

May 17, 2011 | 2000 Pontiac Grand Prix

1 Answer

How to remove upper and lower ball joins on a 4x4 bronco full size 1986


For Lower & Upper Ball Joint Step by Step :

For That you use a C-clamp style ball joint press to remove the ball joint from the suspension arm-note the location of the receiver cup ! For installation of the ball-joint, use the same tool when pressing the ball joint into the suspension arm-again, note the location of the receiver cup.

Step by Step :

  1. Raise and support the vehicle safely, with jackstands.
  2. Remove the spindle and the ball joint assembly from the vehicle.
  3. Remove the snapring from the ball joint. Using a ball joint removal tool, remove the ball joint from the spindle. Do not heat the ball joint or the axle to aid in removal.
  4. Installation is the reverse of the removal procedure. Torque the ball joint stud nut to 85-110 ft. lbs. for 1983-89 Ranger and Bronco II.

    Please Rate, Thank you !

Aug 13, 2010 | 1994 Ford Bronco

2 Answers

What is the estimated cost to replace the ball joints on a 2001 Land Rover Discovery SE (91k mi.)?


HI. Ok, This vehicle is equipped with an upper and lower set of ball joints. The prices are as follows:

Parts price will be $40.00 for the upper set
The labor is set to $195.00 for the upper replacement procedure.

Parts price for the lower ball set will be $40.00.
The labor price for the lower replacement procedure will be $165.00

NOTE_ Land Rover recommends to replace the upper and lower, in this situation. Total cost, if you chose to replace the upper and lower ball sets, will be $80.00 for the parts, and $360.00 on the labor.

Jan 14, 2010 | Land Rover Discovery Cars & Trucks

1 Answer

How do I remove the original ball joints?


An air chisel is the quickest way.Cut off the head and punch out the rest of the rivet,then replace with the included bolts.To separate the ball joints loosen the retaining nut until only one or two threads are holding it on,then hit the casting that the ball joint goes thru with a big hammer.Sounds weird I know, but the joint is angled and striking it straight on will force it out without even touching it.Hit the casting really hard and it will pop loose.This works for tie rods too,hit the casting that holds the tie rod and it will separate without damage.If you use a pickle fork remover it will destroy the rubber boot.After separating watch that rubber brake line.If you let the lower control arm go it will break that brake line so be sure it's supported.Good luck!

Dec 07, 2009 | 1996 Oldsmobile Bravada

1 Answer

Upper and lower ball joint replacement


to remove the axles, remove brake caliper and disc, remove hub assembly, the center hub/axle nut and...(there are i think 3-4 bolts on the back side of the spindle to remove the hub), you may have to force the hub off the spindle with a hammer or air hammer... once the hub is out the axle should slide out of the front differential allowing access to the ball joint nuts for removal...

Jun 12, 2009 | 2000 Dodge Ram 1500 Truck

2 Answers

Upper ball joints/ '89 silverado 1500 4x4


I think the lower ball joints when removing will give you easier access to the top. I would suggest going to the local parts store for a print out of the procedure to be on the safe side.

Apr 01, 2009 | 1989 Chevrolet K1500

Not finding what you are looking for?
1993 Dodge Intrepid Logo

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...