Question about 1994 Dodge Intrepid

1 Answer

My car does the salt shaker when i press the gas pedle

This only happens when i press the gas pedle and it feels like it comes from the right front tire. What could be the problem.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 4,102 Answers

Hi, the problem could be one of a couple of things the first and most likely would be the bottom ball joint this would need looking at by someone who knows what they are looking for.
The next thing it could be is roll bar bushes these would also cause the problem you are having.
Both of these problem would be dangerous if the part was to fail completely so this needs checking sooner rather than later.

As for the parts they are not expensive to buy but it can be a difficult job and would require special tools to remove the old parts and fit the new.

Let me know how you get on or if you need further assistance ok

Posted on Sep 26, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Smelling burnt at time seems like pressing gass pedles and nothing happens feeling a quick jerking motion on take off what's the problem with my ford f 150 2013

Check the transmission fluid. Put a small sample on a white peice of paper. It should look red. If there are any black specks in it, you probably need transmission work. It my just be low on fluid, also look for a leak.

Mar 04, 2017 | Ford F-150 Cars & Trucks

1 Answer


This is caused by the fluid-filled motor mounts and transmission mounts. You are probably right in they have dried out and may need to have the fluid topped up.

Oct 04, 2008 | 1994 Geo Metro

1 Answer

2006 ford muatang g t 4.6 L I have a problem with the gas pedle assm.the first part of pedle movment do;se not respond I have installed anew t.p.s. and anew gas pedle elic. unit there no cable I need to...

I have your shop manual & wiring book. $25 if interested, plus postage.

You don't have a bad PCM, they rarely fail.

tell me more about how it started happening. Also, disconnect battery for 2 hours and try again.

Does it start & idel OK, but not respond to throttle opening?

Sep 08, 2011 | Ford Mustang Cars & Trucks

1 Answer

When i push the gas pedle it clicks but nothing happens can anyone help me it is a gas EZGO 2005

check the steel wire that runs from the accelerator pedal to the engine. its usually on the top right hand side of the engine, it may have a cap on it but you can't miss it. it sort of looks like the steel cable from the brakes on a bicycle

Feb 21, 2010 | 1995 Volkswagen Golf

1 Answer

When i press the gas pedle my car starts to shake

Check CV joint for play, tie rod ends, wheel nuts, lower ball joint, and possibly motor mount as well.

Sep 26, 2009 | 1994 Dodge Intrepid

1 Answer

Right as u step on the gas pedle when taking off the service traction system turnes on. and u feel somthin slipin when it dose. it dose not do it all the time just somtimes i took it into a shop and they...

If the front hubs have been replaced, the problem lies in the harnesses to the wheel speed sensors. Here is a bulletin number for you, 03-05-25-008. It talks about replacing the harnesses to both front wheel speed sensors.

The traction control activates because the system thinks a wheel is slipping. If you slow down at a slow rate the abs might activate also.

Jul 27, 2009 | 2003 Chevrolet Impala

1 Answer

My 88 s10 cranks but unless i pump gas pedle it shuts off. changed fuel filter and throtle body sensor still wont idle .press gas pedle it stalls out must pump pedle to keep it running

what engine does it have? 2.8 ? if so replce pick up coil in distributor /4.3 and 2.5 will do this also it affects pulse to injectors and on time firing

Jun 30, 2009 | 1988 Chevrolet S-10

1 Answer

Need to know what it is

Is the Bronco a manual? If so this may be the slave cylendar for the clutch. If not it may be a brake booster or cylinder. Hope it helps.

Jun 06, 2009 | 1995 Ford Bronco

1 Answer

Table salt in gas tank

the easiest way to do this would be to remove the fuel filter and turn the key on the fuel pump will pump it all out for you. you may have to cycle the key a few times as it will only run for a little while at a time usually about 30 seconds per cycle

May 01, 2009 | 2005 Chrysler Sebring Conv

Not finding what you are looking for?
1994 Dodge Intrepid Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides