Question about 1989 Chevrolet Camaro

Open Question

Chapman car alarm with ignition interupter will not allow the car to start. Is there anything I can do from home to fix this problem? either reprograming the remote or resetting some button or switch?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 57 Answers

SOURCE: new ignition switch now car security system locked

ok here you go
make sure the battery is fully charged befor starting
turn ignition to run
attempt to start once then release the key in the run position
let vehicle sit with the key on for ten minutes
the security light should turn off
turn igniton switch off
wait 5 seconds
turn key to run position
let vehicle sit for 10 minutes
turn key off
wait 5 seconds
turn key to run position
let vehicle sit for ten minutes
turn key off
wait more than 6 seconds
and start engine

Posted on Jun 14, 2009

  • 7353 Answers

SOURCE: need to find valet button

are you talking about the alarm the car came with from GM? if so there is no "valet button" if its the GM system it will need to be done by a dealer or a shop that has a TECH2 scanner.

Posted on Sep 22, 2009

  • 14036 Answers

SOURCE: i had to replace my alternator and when i

STARTER RELAY UNDER THE HOOD IN THE ENGINE COMPARTMENT.YOUR FUSE AND RELAY COVER HAS LOCATION OF STARTER RELAY.AND THE OWNERS MANUAL IN GLOVE COMPARTMENT HAS LOCATION ALL RELAYS AND FUSES.

Posted on Mar 21, 2010

  • 132 Answers

SOURCE: I bought a Chevy Trailblazer, used, had keyless

You need to find the black push button called the valet button. That is the overide. Get in the car turn the key to IGN as the alarm is going off and then you have either 5 or 10 seconds to push that button once and then 2-5 seconds later the alarm is shut off. To put the car into valet mode which means no alarm at all you put the key to IGN push that button once then pull key out at which point the blue light should turn solid blue.

Or option two is you open a door and hit the lock, then unlock, then lock button again on the remote and the blue led will be solid which means no crazy alarm.

Posted on Apr 04, 2010

  • 100 Answers

SOURCE: 1998 car theft alarm

Go to carhelpsite.com it is free as long as you click on 2 of the ads at the website then your questions will be answered by an ASE certified mechanic,you don't have to buy or fill out anything on the ads,so help keep the site free.

Posted on Apr 14, 2010

Testimonial: "helpful"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Aftermarket alarm causing hazard lights to flash and no start


Sounds like your alarm is setting off the anti theft and not allowing it to start. Have who ever installed the alarm fix the problem.

Mar 03, 2015 | Cars & Trucks

1 Answer

I have a 1996 HOnda Accord, and the car has an alarm. Most of the time i have to fight for some time to get the alarm to allow me to start the car


if the key itself doesnt turn its not an alarm issue its the ignition switch itself u need to replace it, it is worn out

Oct 28, 2012 | 1996 Honda Accord

1 Answer

How do i disable my chapman alarm but to where my car will still start ?


Disconnect the whole thing, remove all of it. Then reconnect the original wiring as it came from the factory. why would anyone put another alarm on this when it comes with an excellent factory anti theft system as standard equip??.

Jul 22, 2012 | 1998 Ford Mustang

1 Answer

Car would not turn off with key so they changed ignition ( 1997 Buick Lasabre ), now car wont start. everything else will come on but car wont start.


Changing the ignition was the cause of the NO START. These cars came with a SECURITY system already built in. The key sends a signal to the ignition which reads and sends another signal to the TDM (Theft Deterrent Module) computer which then sends a signal to the starter allowing it to start. I know it seems like alot, but thats just how GM did it. Changing the ignition may have interupted this communication and the car will not start until the communication is fixed. Here is a link with info on the system and ways to fix this yourself.

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Jun 08, 2011 | Buick LeSabre Cars & Trucks

1 Answer

No start, blown ignition fuse 30 amp.


If it is the AM2 (30A) fuse that is blowing, check the ignition condenser, capacitor, within the ignition assembly. I just removed it and assembled the ignition back together. I am in the process of ordering a new one from Rock Auto for a total of $2.57. It seems to be a common issue. The condenser is actually a capacitor and the issue is that they internally short.

Jun 17, 2009 | 1993 Toyota Corolla

2 Answers

93 corolla 1.8 No start Blown ignition fuse


I had a prolem like this one time a while back. what i did was got the wiring diagram and checked everything that was running through that 30 amp fuse. on the one i was working on it ended up being an injector wire pinched under the valve cover and it didnt short out till the car was driven til it warmed up and expanded after the valve cover gasket was changed. hope this helps!

Jun 15, 2009 | 2005 Toyota Corolla

2 Answers

Alarm goes off truck won't start.


sounds like you have an aftermarket alarm not factory most of these alarma are equipped with a starter interupt that will not vehicle start. when connecting the battery ist is normal for the alarm to sound some alarms may not sound if ignition is on while connecting battery, however this is not reccomended. after connecting battery and alarm sounds you should be able to turn it off with trasmitter, if you do not have one then you will need to put key in ignition turn it on and look under the dash for a valet switch or togle switch this may override the alarm and let car start if you cannot locate this you can alway locate the alarm box under dash and unplug it as last resort most alarm defaults will let the car start when this is done. hope this helps

Nov 18, 2008 | 2004 Ford F150

2 Answers

My car alarm is blinking but the remote doesn't work. I already replaced the battery to the remote so I know that's not the problem. If I open the car the alarm goes off and doesn't allow me to start the...


You need to first look under the drivers side dash area near the hood release/fuse panel area and see if there is a valet switch. The switch will look like a little toggle or a push switch. After you locate it, turn the ignition switch to the on position(dont start it) and flick the valet to the opposite position it is in now. If done correctly in most cases the red system light will stay a constant instead of off or blinking indicating you are in valet mode. Next try to start the engine. If this doesnt work you need to remove the alarm system and repair the ignition switch wiring or replace the electrical portion of the ignition switch. The aftermarket alarm cuts into the ignition switch wires and bypasses the start circuit through the alarm module. When disarmed the alarm completes the circuit and allows the car to start. Good luck hope this helps and please rate this.

Nov 05, 2008 | 1997 Nissan.5 Altima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...