Question about 1997 Chevrolet Tahoe

2 Answers

How to remove door panel off drivers side .my door handle will not open door. i have removed scews but apparantly, i am missing something

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Did you remove the trim around the door handle. There is a bolt there that needs to be removed. There may be one where the side rear veiw mirror is.

Posted on Sep 27, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

There are clips on the back of the door panel. Try pulling a corner back enough to see where they are and use a upholstery clip remover to pry them out. Be careful with them, they can break easy.

Posted on Sep 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix broke driver side door handle


remove door panel and find location of missing or broken linkage clip or bushing and replace. https://www.google.com/#q=rockauto

Jul 20, 2014 | 2006 Ford Focus

1 Answer

I need written instructions on how to replace a outside driver side door handle for an 06 ford focus


Close/wind up the window. Remove the inside door panel. Be careful with power window switch and door speaker wiring connectors. Disconnect them before pulling the door panel away. Remove any plastic covers that may be glued to the door. Have a look at the door handle from inside the door. You will have some idea as to how to remove it. Usually door handles are secured by screws from the inside. Locate and remove them. Remove linkages to the door handle then pull handle form outside.

Jul 20, 2014 | 2006 Ford Focus

1 Answer

Remove door panel


Trim and molding remove tool and a phillips screw driver
Drivers Side

Remove
Door trim panel and water shield (top where window is)
Plastic panel around door handle. snaps out
1 screw upper front extension assembly (plastic triangle)
2 screws located lower bottom left (drivers side) and door trim panel
Use remove tool to push out retaining 'C' clip behind door handle
Grasp panel where opening are and pull up and out gently
Now disconnect wire harness

May 07, 2013 | 1991 Ford Thunderbird

2 Answers

Removing rear door panel


On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls.

Jun 24, 2010 | 2003 Dodge Neon

1 Answer

How do you remove the inside door skin to replace a 2002 driver side mirror?


Look for scews around the door handle. Many are covered. After scews and maybe a plate behind the mirror attaching area you can start prying the door panel off. not easy.

Nov 15, 2009 | 2002 Jeep Grand Cherokee

2 Answers

Lock barrell on the drivers side is broken


you'll need to remove your door panel (screws are by the door handle, arm rest, under door and side of door) and pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything.

I'm not sure what you mean by lock barrell.. I'm guessing the cylinder which you'll just have to bolt back onto the door.. you may need to find a specific bolt though....

Aug 10, 2009 | 1998 Volkswagen Passat

1 Answer

Have loosened the panel, all retianing clips I


There is normally some screws in the handle door that stick to door panel,also you may need to remove manual window handle..(depends if this applies here)...

Aug 04, 2009 | 1999 Honda Accord

1 Answer

Diver side door will not open with door handle (outsidedoor )


There is a small clip that holds the outside door handle arm (inside the door) to the latching assembly, so the door panel has to be removed to reattach it. Sometimes the little clip is still attached to the handle arm, sometimes they are in the bottom of the door & sometimes you can't find them at all... Rick

Apr 13, 2009 | 1991 Chevrolet Lumina

1 Answer

1994 buick regal door


first step is to remove inside door panel. look around panel for any visable screws note most are hidden remove all to free panel along bottom of panel are plastic clips gently pull near clips to release if panel is hard to pull off look for more scews like under power window switch which may pop out and have screw undernieth near door handle and under arm rest. once panel is off look indoor near outside handle and u should be able to see whats going on u may just need new clip to hold latch rod to handle or may need new handle from a salvage yard or auto parts store but first step remove panel hope this helps u

Apr 03, 2009 | 1994 Buick Regal Gran Sport

1 Answer

Removing door panel in 2000 toyota corolla


remove phillips scew and the door handle. remove padded arm rest on the door by lifting it up, and remove 2 screws. You can use a panel tool to remove the plastic toggle like pins holding the panel border in. Be as gentle as possible they may break due to becoming brittle.

Apr 01, 2009 | 2000 Toyota Corolla

Not finding what you are looking for?
1997 Chevrolet Tahoe Logo

364 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...