Question about Chevrolet Silverado 1500

1 Answer

How do you remover the rear axle on a 1993 chevy pickup?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,982 Answers

On yours, you need to remove the diff cover, remove the small retainer bolt at the end of the spider gear cross shaft and remove the shaft. push the axle in and remove the "c" clip on the axle end. It can then be pulled out of the housing. Reverse to install. Don't turn the gears while toe cross shaft is out or the spider gears will exit to the floor. You can put your finger into one hole and gently turn it to avoid that, but don't jam your finger in there.

Posted on Sep 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove a 1990 rear axle on a Chevy pickup four wheel drive


Diane, links below show how to remove axles on Chevy trucks.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
remove rear axel on 1993 chevy g20
How To Change Your Rear Axel Seal Chevy Silverado
How To install Replace rear Axle 2000 06 Chevy Suburban Silverado GMC...


May 05, 2016 | Cars & Trucks

2 Answers

How do you pull a 1979 gmc jimmy 4x4 rear right axle


QU40221 19 Spline Outer Axle Shaft for 1977 to 1991 Chevy, GMC Corporate GM 10 Bolt Front Axle is a genuine original equipment outer axle stub shaft for all GM 10 Bolt front axles in 1977 to 1991 Chevy Blazers, GMC Jimmys, and Suburbans, plus Chevy, GMC 4x4 1/2 ton and 3/4 ton Pickups. The splined end on these new axle shafts has three snap ring grooves in three places so they are compatible with all types of automatic and manual lockout hubs plus all full-time solid splined drive gears.

Also available while supplies last: QU40221U Used Outer Axle Shaft with 3 snap ring grooves and QU40660UUsed Inner Axle Shafts with 2 snap ring grooves (QU40660U is not compatible with automatic locking hubs)



see this vdio

Apr 01, 2015 | GMC Jimmy Cars & Trucks

1 Answer

How do I remove a rear end from a 1993 chevy z71 4x4 1/2 ton pickup?


Fairly simple process( but not always easy,Just warning you in advance) 1. Disconnect rubber brake line from top of axle.Plug appropriately to prevent fluid loss. 2. Disconnect e-brake cables. (beside the frame on driver's side) 3. Remove shocks ( or just diconnect at either end) 4. disconnect driveshaft at axle and leave in trans (if possible) to prevent fluid loss. 5 Axle can now be removed by either removing the bolts at each end of the springs or by removing the u-bolts attaching the axle to the springs

Sep 11, 2014 | Chevrolet Cars & Trucks

1 Answer

How do I remove a rear end from a 1993 chevy z71 pickup 1/2 ton 4x4?


1 Disconnect hydraulic brake line. 2. Disconect e-brake cables beside the frame. 3. Disconnect driveshaft. 4. Remove shocks 5. Disconnect ABS wiring (if equipped) 6. Remove bots at each end of springs or remove u-bolts that are holding the axle to the springs

Sep 11, 2014 | Cars & Trucks

1 Answer

How do I replace the rear axle


Is it rear or front wheel drive?
Rear wheel drive. take of the wheel. Behind the hub there should be bolts that hold the axle in place. Undo these, then yoy need something to pull the axle. They are sometimes a bit tight and need a bit of force.
What is wrong why do you need to remove it?

Oct 11, 2011 | 1993 Nissan Pickup

2 Answers

Rear axle remover 0f a1996 chevy 1500 pickup


if you mean pull the axle out of the housing you must take the cover off the rear end drianing the lube at the same time and turn untill you can remove the bolt that holds the center pin you see and carefully slide the pin out far enough that you can push the axle in towards the center than remove the u shaped clip that hold it in the center, then it just slides out

Jun 04, 2009 | 1996 Chevrolet C1500

1 Answer

I need to remove my rear axle shaft


These rear ends don't use c-clips on the axle shafts to remove the axles.

It must be done by removing the axle at the backing plate area.

May 19, 2009 | 1997 Nissan Pickup

3 Answers

1998 chevy s-10, what kind of rear axle is in it now


Hi there should be a tag on the rear diff housing ,, one of the bolts that hold the rear cover on. all the info will be on the tag.

Apr 12, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

1984 camaro


Have a 1985 chevy pickup but it won't go forward only goes backwards. Would I need another transmission or what should I check?

Oct 18, 2008 | 1993 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...