Question about 1996 Ford F150 Regular Cab

1 Answer

After replacing plugs and wires engin stalls when

1996 4.9 F150? After replacing plugs and wires engin stalls when execrating.Starts and idles fine.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Double check the spark plugs are tight as well as the wires.

Posted on Sep 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1996 Honda accord Stalling!!


I would replace the fuel filter, double check your work and make sure that all plug wires are securely connected and going to the right place (we all make mistakes sometimes) and check or replace the coil.

Jul 07, 2013 | 1996 Honda Accord

1 Answer

1996 mercedes c280 dies when put in drive


Engine stalls or RPM fluctuates at idle up and down or dies near idle.

This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve but always run a OBD2 fault code as well as the cleaning procedure. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control

Oct 15, 2012 | 1996 Mercedes-Benz C-Class

2 Answers

My '96 F150 is running rough and stalls. Also, while idling the tach was bouncing from 500 to 1000 rpm but not all the time. The mechanic replaced an ignition module, but it's still doing it. Any ideas?...


When the engine is cool, start the engine and try to get your figers or a screwdriver blade into the top section of the EGR valve and lift it. It should make the engine stall or near to it, If it does not it is hung up inthe open position and has to be removed and cleaned with overnight oven cleaner. Only spray the lowae parts not the diaframatic control on top.

Sep 07, 2009 | 1996 Ford F150 Regular Cab

1 Answer

Rough idle 2003 f150


plugs or wires need replacing.

Jun 07, 2009 | 2003 Ford F150 Regular Cab

1 Answer

1996 f150 5.0 idles fine then stalls and wont start


belive it or not you may have a defective IAC Valve , it is common for the valve not to work correctly and not set a code in the ECM

Feb 06, 2009 | 2004 Ford F150

1 Answer

Starts fine, Idles fine, Drives Fine for a while


you might want to chk. the crank sensor and or cam sensor. sounds more to me that it could be fuel problem. chk. fuel pressure. pump could be on its way out. don't be fooled by hearing the pump running as they sound like they are pumping but there not, at least not enought pressure to keep it running. pressure should be around 50 p.s.i.

Jan 06, 2009 | 1990 Buick Century

1 Answer

Hesitates/stalls during acceleration


i would check fuel supply, volume adn pressure, i wold also look at the MAF sensor hot wire to see if it has a little chia pet growing on it.

Dec 13, 2008 | 1992 Ford Taurus

Not finding what you are looking for?
1996 Ford F150 Regular Cab Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...