Question about 1998 Chevrolet S-10 Pickup

1 Answer

Chevy S-10 1999, Left rear turn signal is not working

Left rear turn signal is not working, I have replaced the light. I have checked the fuse, and it looks fine.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

With a test light or better yet a digital multimeter, must check and see if current is reaching the conductive points on the inside of the lamp holder. Most faults are due to oxidation or broken wire(s).

Posted on Sep 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 Ford Edge Rear Left Turn Signal not working - Bulb and Socket confirmed good. Fuse Controlling both Left Front and Rear turn light confirmed good. Front Left turn light working fine.


The flasher is under the dash.If you turn on the signal listen for it's location.Turn on your 4 way flasher and see if the left rear light is flashing.If it's not then replace the bulb.If it still does'nt work after replacing the bulb check if there is power to the socket. Use a probe light.If no power to the socket.There is a break in the wire or worse the signal switch may be the culprit

Dec 18, 2017 | Ford Cars & Trucks

1 Answer

2011 Chevy Silvarado 1500 LS turn signal lights on the front passenger side don't work and rear goes fast...


Circuit/System Description
Ground is applied at all times at G201 to the turn signal/multifunction switch. The turn signal lamps may only be activated with the ignition switch in the ON or START position. When the turn signal/multifunction switch is placed in either the TURN RIGHT or TURN LEFT position, ground is applied to the body control module (BCM) through either the right turn or left turn signal switch signal circuit. The BCM then applies a pulsating voltage to the front and rear turn signal lamps through their respective control circuits.
.
Did you check the RT STOP TRN fuse 15amp insturment panel fuse box.
Fuse Block - I/P
Left of the I/P behind the side trim panel
If the fuse is good , you could have a wiring problem or the BCM is bad .

Sep 08, 2017 | Cars & Trucks

2 Answers

My left brake light/turn signal isn't working! I replaced the bulbs and turn signal flasher! Still not working! Its 2000 Chevy s10 blazer


If the other brake and turn lights are working the brake light and flasher units are ok . With a test light check at the bulb holder terminal and bulb holder body, test light should glow ,if not check from terminal to a metal part of panel away from the light body . If test light now glows the brake light body has a bad earth if the test still not glowing the power cable to the light is broken.

May 20, 2014 | Cars & Trucks

1 Answer

Blinkers dont work


Did you replace the flasher?

Jul 31, 2017 | 1994 Chevrolet Cavalier

1 Answer

03 chevy venture rt.front parking light&turn light don't work replace bulb&socket


The rapid flashing occurs because of the light problem. If the 20A PARK LP fuse in the underhood fuse block is OK, the front marker lamps and the park lights should turn on when you set the headlamp switch to PARK. If the 10A T/SIG fuse in the instrument panel fuse block is OK, and the ignition switch is on, moving the turn signal multi-function switch to signal a right or left turn should cause the turn signals to flash. If this doesn't happen, check for a missing ground connection to the socket you replaced and check to be sure the replacement lamp was not forced into the socket backwards (it happens).

Sep 17, 2012 | 2003 Chevrolet Venture Passanger

2 Answers

2007 chevy impala brake light and left turn signal not working


Fast flashing dash signals mean there is a bulb issue-DEFINATELY!

Aug 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

2 Answers

99 Chevy Tahoe... Rear turn signals, brake lights, and hazards


I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Oct 10, 2009 | 1999 Chevrolet Tahoe

3 Answers

1992 chevy s10 no brake lights or turn signals


Check the front and rear (although probably the rear) turn signal bulb socket for corrosion and/or water intrusion. If you find corrosion attempt to clean (but you will probably have to replace the socket and bulb). For water intrusion you will probably have to replace the break lamp assembly.

Aug 02, 2009 | 1992 Chevrolet S-10

1 Answer

Left turn signal problem on06' chevy tahoe


check your left light fixture.make sure you have a good contact.sometimes they burnout

Feb 07, 2009 | 2006 Chevrolet Tahoe

Not finding what you are looking for?
1998 Chevrolet S-10 Pickup Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

79077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...