Question about 2004 Volvo XC90

1 Answer

I need to replace the rear paking brake shoes on a 2005 XC 90 2.4 diesel Automatic. I replaced the rear discs but damaged the brake shoes taking off the old discs so at the moment I am running without a parking brake

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,865 Answers

Register (its free) at Autozone.com and they will provide you with free repair manual for your vehicle

Posted on Sep 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Santa Fe back wheel lockup when in reverse


ref: linkhttp://www.hyundai-forums.com/lc-2000-2005-accent/152405-tried-replace-rear-brake-shoes-drum-will-not-fit-after-new-shoes.html
The automatic brake adjusters work when the car is in reverse and you touch the brake. They should not lock the wheel however. An inspection of the rear brake assembly on both sides might show the problem. total brake repair might be appropriate on a car that age.

Dec 29, 2017 | 2005 Hyundai Santa Fe

1 Answer

How to remove and clean and replace the rear brakes on a 2008Toyota yaris


REMOVING REAR BRAKE DRUM SUB-ASSEMBLY
1. Release the parking brake and remove the rear
brake drum.
If the rear brake drum cannot be removed easily,
do the following:-
2.Remove the hole rubber and insert a screwdriver
through the hole into the backing plate, and hold the
automatic adjust lever away from the adjuster.
3.Using another screwdriver, contract the brake shoe
by turning the adjuster.
4. Take out the brake drum from the flange.
5. remove the shoe hold down spring cup, shoe hold down spring, pin and front side brake shoe.
6. Remove the tension spring. Remove the shoe return spring from the rear brake shoe and remove the parking brake shoe strut set.
7. Remove the shoe holding spring cup, shoe hold spring, pin and rear brake shoe.
8. separate the parking brake cable.
9. Remove the automatic adjust lever tension spring and remove the automatic adjust lever.
10. remove the C-washer and remove the parking brake shoe lever.
NOTE: Do not use any solvent like gasoline to wash the brake parts.
Always wear safety goggles and mask before using compressed air.



Dec 28, 2013 | Cars & Trucks

1 Answer

Emergenct brake will not hold


The linkage could need to be adjusted. Or the brake shoes inside the rear drums are worn out and need to be replaced. If you accidentally drive the brake on. It doesn't take long to wear those brake shoes out. You can normally smell them when that happens. On today's vehicles they are actually designed with 3 different brake systems. Front brake disc and rotors, rear disc and rotors, and inside the rear brake rotor their is a small brake drum where the emergency brake shoes are located. The only purpose for the shoes and drums is emergency brake only (normally). Hope this helps.

Nov 27, 2012 | Cars & Trucks

2 Answers

How do i take off the brake drums on a 2003 chevy cavalier


After you remove the tire, the drim should slide off. If it doesn't then try using a rubber mallet and gently tap on the outside edge as you pull on it. Sometimes you also need to tap on the drum in the center part. I have sprayed penetrating lubes like WD-40 or PB Blaster into the seam at the center. You may also have to back off the parking brake cable or even use the adjuster to back off the shoes.

Jan 27, 2011 | 2003 Chevrolet Cavalier

2 Answers

Rear brakes scrubbing are they pads or drums


pads go with disc brakes
shoes go with drum brakes.

If you have drums in the back, the rear brake shoes may be worn out or are not held together with the springs (a spring may have broken).

Have the brakes checked as soon as possible for broken or worn parts.

Good luck on this repair.

Dec 31, 2010 | 1999 Chrysler Concorde

1 Answer

I have a 2005 chevy avalanche z71,I need to replace the brake shoes on the parking brake,it has rear discs with the drum inside.Do I have to remove the rear axle to get the new shoes on,they are one piece


no jack up and secure truck remove wheel- brake caliper-mounting bracket and brake disc under drivers side door by frame rail is a 1 into 2 cable with an adjuster this is e-brake cable loosen connection on 1500 models the brake is secured at bottom with a screw and a clip

Jan 22, 2010 | 2005 Chevrolet Avalanche

1 Answer

How to replace reak brake rotors on Jeep Liberty


Replace rear rotors on 04 liberty.
Remove tire & wheel
Remove brake caliper, tie up out of way.
Back off e-brake shoe adjustment.
Remove factory spring clip from lugs (2places)
This is the crude part....
After attempting to pull off disc/drum with puller....I got pretty sick of it. Understand this is in the Northeast with lots of salt on the roads in winter. Needless to say there is a ridge of rust around the inside edge of the e-brake surface. Any more pressure and I was afraid of damage to the e-brake shoe asembly. I then took a small grinder with a cut off wheel and cut the disc thru (used space where caliper usually sits). Also cut nearly through the face between 2 lugs. You can't quite get thru the back corner at the disc. Since the material is cast iron it will crack when you drive a wedge in the slot cut in the disc. This opens the housing around the shoes and it slides off easily. The cutting operation took less than10 mins, alot less than the puller with hammer assist!
I know this is a bit "unorthodox" to say the least, however the object is to remove the old junk disc safely and as quickly as possible, without harming the e-brake parts inside.
Install new parts in reverse order, new pads go in easy after squeezing the caliper piston back with a c clamp as is the normal procedure.

Mar 21, 2009 | 2005 Jeep Liberty

2 Answers

REAR BRAKES


i think your aware of how to change the brakes if im right and your problem is the rusted drum doesnt want to come off the only way to get the old drum off is to remove adjuster plug from behind drum dustshield and adjust the shoes so that there not even close to the braking area of the drum then try and wiggle the drum off of the assembly if it is not coming off then you need to use the old nylon hammer on the drum and i mean you must hit the drum from side to side trying by hand to wiggle the drum off its a tight fit and you need to strike the drum on the face not on the fins not wanting to damage with persistance and care and patience you will eventually be able to remove the drum to service brakes take care and good luck with it

Jul 01, 2008 | 2007 Dodge Caliber SXT Sport Hatchback

1 Answer

Replace rear shoes


  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove the rear wheels.
  3. Remove the drums.
  4. Remove the automatic adjuster spring and lever.
  5. Remove the hold-down clips and pins.
  6. Rotate the automatic adjuster starwheel enough so both shoes move out far enough to be free of the wheel cylinder boots.
  7. Disconnect the parking brake cable from the actuating lever.
  8. Remove the lower shoe to shoe spring.
  9. With the shoes held together by the upper shoe to shoe spring, remove them from the backing plate. 0900c152800c4b3d.jpgKelsey Hayes rear brake assembly (left side shown) 0900c152800c4b3e.jpgExploded view of the drum brake assembly—2004 model shown
GOODLUCK, shoes for this car ~ 15 bucks at auto zone.

May 27, 2008 | 2000 Plymouth Neon

Not finding what you are looking for?
2004 Volvo XC90 Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...