Question about 1996 Toyota Tacoma

2 Answers

How do you fix the low beams when the high beams work on a 96 Toyota Tacoma? Checked Bulbs,fuses all are good.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,111 Answers

Sounds like it may be the lever itself on the wheel for turnsignals etc. otherwise use a test light to determine where power begins and ends at the switch by removing it a good ground and start testing by switching from hi beam to low beam this will let you know if i am correct with my determination

Posted on Sep 26, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 832 Answers

Check the low beam contact relay, it must be defective.
Have it replaced. Send your e-mail, if our solution did
it right.

Posted on Sep 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No highbeams low works fine. changed switch but still the same fuses are good. help


98 Explorer No High Beams Problem - Ford Explorer and Ranger ...

https://www.explorerforum.com/forums/showthread.php?t=374129

Nov 15, 2012 - 16 posts - ‎8 authors
98 Explorer XLT 4X4 - No high beams. I've read thru many threads here and other places about this. Pulled and checked every fuse - all good ... Fog Lights Off When High Beams Activated - Normal?
19 posts
Nov 30, 2015
Headlights not working (not MFS, Fuses, or bulbs)
12 posts
Feb 24, 2015
97 explorer no low beams high beams
3 posts
Nov 4, 2013
no headlights in 96
15 posts
May 7, 2009
More results from www.explorerforum.com

Jan 03, 2016 | 1998 Ford Explorer

1 Answer

97 Tacoma has no low beams and high beams work fine except the indicator light in the dash doent work.


Ck the relay switch the high one to the low they are the same also I believe they are fused in the one fuse box under the hood behind the battery

Jan 22, 2015 | 1997 Toyota Tacoma

2 Answers

I have a 1995 Ford Explorer Limited and the high beams work but the low beams and fog lights do not, please help....


These trucks are known for bad multifuction switches.
the switch that i talk of is the signal switch , the handle is the switch, it bolts to side of steering column . this switch controls the signals and the headlights and high /low beams. the other thing is the headlight switch connector, the connector some times goes bad and starts to melt or just comes out of the connector. you will need to remove the cover to steering column, the screws are located under the bottom cover in holes. remove cover and check connector and then test for power if you have power going into switch but not coming out then switch is bad.

the last thing is to make sure the bulbs are good , make sure the headlight bulbs are good , and also the driving light bulbs, test for power at the connectors to those lights to.
You will need to do a little testing to find the problem.

Nov 22, 2012 | Cars & Trucks

1 Answer

2005 monte carlo drl won't tun on and i have no Low beams too. High beams, turning signals and hazards works. I replaced the bulbs, still drl and low bemas don't work. Checked all fuses and th


CHECK UNDER HOOD FUSE BLOCK FOR FUSES AND CIRCUIT BREAKER AND RELAYS....IF NOT IT IS AN ELECTRICAL DIAGNOSES. USE A MULTI METER TO SEE IF YOU ARE GETTING CLOSE TO 12 VOLTS AT SOURCE!
***NO EASY FIX...ALMOST EVER!!!

Jul 30, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

Both low beam lights dont work on my 2005 Toyota Corolla.; but my high beam lights do. I have already checked the fuses. Fuses okay. Is this a switch problem or should I check the bulbs first.


CHECK THE BULBS FIRST! TRY REPLACING WITH A NEA ONE ON ONE SIDE, AND TURN LIGHTS ON, IF YOUR LOW BEAM LITES UP, REPLACE THE OTHER ONE! IF NOT THERE COULD BE A WIRING PROBLEM TO THE LOW BEAMS

Feb 28, 2011 | 2005 Toyota Corolla

2 Answers

Low beams dont work, only high beams do. 02 tacoma


If there is power there, then it has to be the bulbs. The trouble that most people have is, they don't see how both bulbs could burn out at once... and they're right. They don't. But you see vehicles with one headlight all the time. They don't know it unless you tell them or they happen to see it themselves. Then the second light burns out, and they think it's a major catastrophe, when in fact, it's just bulbs. The high beam still works because the bulb is double filament. The only other thing it can be is the dimmer switch, and since you switched it to high, it appears to be working. However, if it's not bulbs, it still could be the switch.

Oct 07, 2009 | 1996 Toyota Tacoma

1 Answer

Low beams not working on 2004 Toyota Tacoma


check your multi function switch (headlamp / dimmer / signal) check for power on outlet side of connector to both hi and low beams. sidebar- I have seen both low beam elements burn out together, but if you have replaced both bulbs not the issue, if not give it a shot, stranger things have happened.

Aug 25, 2009 | 2000 Toyota Corolla

1 Answer

I only have low beams, no high beam -- hi-beam indicator light is on. 2003 Toyota Tacoma.


are the high beam headlight bulbs blown? if not replace highbeam relay or fuses

Jul 05, 2009 | 2001 Toyota Tacoma

1 Answer

My high beams stopped working,low beams still work


I have checked the Toyota web sites and the general conscientious is the high beam switch is defective.

Dec 14, 2008 | 2006 Toyota Camry

Not finding what you are looking for?
1996 Toyota Tacoma Logo

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...