Question about Hyundai Motor 2004 Accent

Open Question

How can i get the rear high level brake light cover off to change the bulb?

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
ghost4548
  • 776 Answers

SOURCE: High Level Brake bulb replacement

If memory serves, there are two screws holding this light assy to the rear package deck. They are covered (LH and RH side of this assy). remove the covers and using a phillips screwdriver, remove the screws and lift the assy up and away from the rear glass. you now have access to the bulb and socket.

Posted on May 27, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Megane coupe 1999 rear fog indicator comes on when brakes pressed, fogs don't work or high level brake light.


I have the similar problem with my 2000 model. On mine I have narrowed it down to the rear light cluster on the right as you look at it from the rear (drivers side in the UK). Here's how I fix mine, although it does keep happening every now and again:
Remove the lights cover from inside the boot, it is held in place by a couple of plastic nuts.
Remove the strip of lights that are clipped into place.
There is an electrical connector block attached to the now removed light cluster. Undo this and the whole set of lights will be free.
Where the connector block fits to the light cluster clean all of the terminals. I use one of my wifes nail emery boards.
Make sure the female connectors on the connector block are all fairly snug so when put back together it is a tight fit.
Clean with electrical contact cleaner if you have any (not really necessary but I had some anyway).
Reconnect the block and test your lights, put back together.
I suspect it is an earth fault but I ran a separate earth to the unit but it didn't improve.
Other faults I noticed is the rear wiper operates when the front one only is on and I touch the brakes. Also when I lock the car when the indicators flash to show it is locked the rear high level brake lights flash as well. I was thinking of trying another light cluster, but 25 pounds from a breakers yard seems a little steep for a minor irritation.

Aug 02, 2014 | 1999 Renault Megane

1 Answer

How to change high mount brake light bulb in a 2002 lincoln navigator


Instructions
    • 1 Open one of the rear doorsicon1.png of the LS. Position yourself on your knees in the back seat, facing the rear deck or rear dash.
    • 2 Remove the cover from the high-mount brakeicon1.png light assembly, by hand. Pull the cover toward the front of the vehicle. Do not pull extremely hard, or you will break the clips that mount through the deck from the trunk.
    • 3 Pull the old light bulbsicon1.png out of the high-mount assembly. Wrap the new bulbs in a paper tower prior to picking them up. Insert new bulbs into the assembly, by hand. Do not touch the bulb lenses with your hands directly.
    • 4 Install the high-mount cover onto the rear deck and push the cover toward the rear glass to lock it in place.


Read more: http://www.ehow.com/how_10060583_replace-upper-brake-bulb-2001-lincoln-ls.html#ixzz30cNQ559F

May 03, 2014 | Cars & Trucks

1 Answer

I have a 51 plate ford focus estate,the rear brake lights dont work although the high level one does,i`ve checked fuse and bulbs etc. any clues


If bulbs are definetly ok you can look behind trim on the left side in the boot, which covers the space between the boot floor and the window, you are looking for a green/red wire in a connector. this is the power cable which supplies both rear side mounted brake lights. You should check for voltage at this wire when pedal depressed. If no voltage you would need to trace this back to where the wire is joined in the loom as it feeds off the wire which supplies the high mounted brake light and you have stated that this works. Would still double check bulbs first though if you did'nt replace them. Hope this helps.

Jan 27, 2011 | 2000 Ford Focus

1 Answer

How do i change a brake light bulb on 2000 vw jetta?


Removing:
  • Switch off all electrical consumers, switch off ignition key and remove ignition key.
  • Remove rear luggage compartment side panel trim (left or right).
98971821.gif
  • Remove 3 nuts, arrows, and remove housing.
  • Remove bulb holder.
Installing:
  • Install bulb holder.
  • Insert housing into body opening.
  • Tighten nuts.
  • Install applicable rear luggage compartment side panel trim.
Rear Light Bulb Holder Removing And Installing:
Removing:
  • Disconnect electrical connector.
  • Depress retainers, arrows, and remove bulb holder.
98971817.gif Installing:
  • Install in reverse order of removal.
And the Center Mounted Brake Lamp.
High mount Brake Light Removing And Installing:
The high mount brake light is installed in the rear shelf.
98971288.gif Removing:
  • Switch off all electrical consumers, switch off ignition key and remove ignition key.
  • Disconnect electrical connector from high mount brake light.
  • Remove rear shelf
  • Un-clip high-mount brake light from rear shelf, arrows.
  • Install in reverse order of removal.
NOTE: The bulb holder base plate contains soldered- in light emitting diodes (LEDs) that are not replaceable. In the event of LED malfunction, replace complete bulb holder.
Additional

Mar 13, 2010 | 2000 Volkswagen Beetle

3 Answers

Camry CE 2001: Changed the brake light in the


hi the rear high level brake warning light in rear screen ? works with the other two brake lights at same time when you press brake pedal with ignition on ? so may i suggest you check the other brake lights are working ? if not ? check these bulbs? reason being that from the symptoms you describe that high level light is staying on ? it would suggest that the brake light switch at the pedal is not operating ie not putting brake lights off when pedal is off and would suspect the brake lights have been on for some time and burned bulbs out due to the brakelight element in bulbs are high wattage if you check on what i have suggested? and is the case ? come back and will advise you how to adjust brake switch easy diy hope this helps? best wishes from the uk

Jan 01, 2010 | 2001 Toyota Camry

2 Answers

My high level brake light has bruned out,(third brake light). I was informed by the dealer the back window panel has to be removed to replace the 3.00 dollar bulb, total cost 75.00 dollars. With some


replace the bulb...??? This requires you remove the rear package deck (to access the bulb & socket). to do this, remove the seat bottom (two bolts hold the rear seat bottom to the chassis, then remove the bolts which hold the shoulder cushions (LH & RH - 12mm bolts) then remove the cosmetic molding around the trunk access (7 to 8 screws) then remove the "C" pillar covers (SRS curtain airbag LH & RH) to access the rear deck package & access the third brake lamp bulb. replace it, then reassemble.

May 26, 2009 | 2006 Hyundai Sonata

1 Answer

High Level Brake bulb replacement


If memory serves, there are two screws holding this light assy to the rear package deck. They are covered (LH and RH side of this assy). remove the covers and using a phillips screwdriver, remove the screws and lift the assy up and away from the rear glass. you now have access to the bulb and socket.

May 18, 2009 | Hyundai Motor 2004 Accent

2 Answers

Replace rear window brake light bulb


I just had to do this, and it isn't all that easy or quick. First, gently work the gray, carpet like cover loose from the area around the tail light ,(this may give you a little trouble). Once you have done this, you will see three silver nuts. These must be unscrewed. The lower left nut must be accessed through a hole next to where the trunk lid fits. (The screws are permanently attached to the lens housing so will not drop into obscurity when the nuts are removed). After removing the nuts, GENTLY work the lens housing away from the car. You may need a screw driver to unseat the housing, but just be gentle.

You will find three bulbs inside the lens. The brake light bulb is on the lower right side. Simply pull the old bulb out and insert the new one.

Just reverse these directions to reassemble the housing.

May 04, 2009 | 2002 Lincoln LS

1 Answer

Hyandia Accent


not sure which top tail light you mean? do you wish to replace bulb or actual lamp on the rear screen? this is the high level brake light ! OR do you wish to replace bulb in one of the rear tail lamps offside/nearside ? which ever ? the h/level brake light bulb is accessable for bulb from the rear panel on hatch behind lamp bulb is 16 watt capless push in type

Nov 10, 2008 | 2003 Hyundai Accent

1 Answer

Hyundia gets


hiya to access the bulb on high level b/light with hatch back up you will see the shroud/cover surrounding the lamp ? this cover is a clip on to remove it just hold the cover on both side/ends and pull/slide the cover down keeping against the screen it is easy ! and you will see the clips and where they clip on? the actual bulb is removed by twist anti clockwise the socket and pull out of lamp the bulb is a larger version of the push in type bulbs as fitted to small sidelamp front bulbs on most cars be sure to replace the bulb with correct type ie 16 WATT refit new bulb and check operation before you refit cover/shroud ps now would be a good time to clean rear screen area not accessable with the cover in position ?? best wishes

Oct 10, 2008 | 2000 Hyundai Accent

Not finding what you are looking for?
Hyundai Motor 2004 Accent Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...