Question about 1995 Chevrolet Astro

Open Question

Transmission not shifting. Which area is the computer for the transmission located.

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission Control Solenoid (shift solenoid)


in the valve body area-take the pan off--but u need a repair manual for details--a code is just general-run a data stream to pinpoint further issues-dont go to a dealer

Jul 15, 2013 | 1996 Cadillac DeVille

1 Answer

How difficult is it to change the shifter cable


1

Take the rubber boot off the gear shift inside the vehicle and lift it up, exposing the area where the gear shift and the transmission connect.
2

Look for the shift cable and the shifting arm. A single bolt and nut connect the shift cable and shift arm.

3

Twist the nut connecting the gear shift and the transmission. Use a socket wrench and remove the gear shift. Use an open-end wrench to loosen the nut holding the shift cable and the shift arm together.
4

Slide off the sleeve on the shift cable and loosen the shift cable at the other end with an open-end wrench. Both ends of the shifting cable attach to the shifting arm in different locations.
5

Hitch the new shift cable to the 2 anchor points on the shift arm using the same bolts and nuts. Reconnect the gear shift to the transmission and push the rubber boot back into place around the gear shift inside the car.
6

Test the functionality of the shifting cable by moving the gear shift in and out of gear.

Jan 03, 2013 | Saturn Cars & Trucks

1 Answer

How to install a transmission shift cable in a 2000 Cavalier


    • 1 Take the rubber boot off the gear shift inside the vehicle and lift it up, exposing the area where the gear shift and the transmission connect.
    • 2 Look for the shift cable and the shifting arm. A single bolt and nut connect the shift cable and shift arm.
    • 3 Twist the nut connecting the gear shift and the transmission. Use a socket wrench and remove the gear shift. Use an open-end wrench to loosen the nut holding the shift cable and the shift arm together.
    • 4 Slide off the sleeve on the shift cable and loosen the shift cable at the other end with an open-end wrench. Both ends of the shifting cable attach to the shifting arm in different locations.
    • 5 Hitch the new shift cable to the 2 anchor points on the shift arm using the same bolts and nuts. Reconnect the gear shift to the transmission and push the rubber boot back into place around the gear shift inside the car.
    • 6 Test the functionality of the shifting cable by moving the gear shift in and out of gear.

Sep 23, 2011 | Chevrolet Cavalier Cars & Trucks

2 Answers

Can you explain to me how to get to the sensor located underneath my dash that has to do with my transmission shifting? And what that fuse is called? in my 1999 buick park avenue


LOOK FOR TRANSMISSION FUSE UNDER THE HOOD IN THE FUSE AND RELAY BOX.HAVE VECHICLE CODE SCANNED FIRST TO SEE WHAT TRANSMISSION SHIFT SOLENOID BAD.GUESSING WILL COST YOU.SOME TRANSMISSION SHIFT SOLENOIDS COST $70.00 TO $80.00 BUCKS.

Jan 22, 2011 | Buick Park Avenue Cars & Trucks

1 Answer

Why is my 96 crown vic shifting hard after take off.


HI. I will list the all areas of concern below:

1. Dirty or clogged transmission filter
2. Low transmission fluid level
3. Faulty solenoid shift pack(Located in the valve body of the transmission)
4. Contaminated transmission fluid reserve.

I would advise to inspect the following areas above, asap. You can start be simply having your transmission flushed and refilled with fresh fluid and a new filter. In most cases, that will correct the hard shifting. If it doesn't; have the transmission solenoid pack inspected by a competent ford tech or a local competent independent mechanic.

Aug 17, 2010 | Ford Crown Victoria Cars & Trucks

1 Answer

98 twn and country van trans slips into reverse and first gear when its cold. Is there a simple fixx


There is probably a problem with the cable and/or cable connection/shifting bracket to the transmission. It is located on the top of the transmission. With a Partner: have them turn the key to the on (not start) position and have them shift to each of the PRNDL positions.
Meanwhile YOU: Inspect that area to ensure nothing is impeding the cable/cable connection/shifting bracket, or interfering their operation.
When shifting, is the Indicator "on" or to the left or right of the appropriate selection (PRNDL)? If the indicator is to the left or right of them there is a good possibility that you need to loosen the gear cable connection, located on top of the transmission and pull the shifting bracket going into the transmission - towards the front of the car. While holding the bracket to the front (Park) position tighten back down the cable fasteners.
Let me know if this helped, or if you have additional questions or information. Feel free to contact me at FixYa.com!

Jan 11, 2010 | 1998 Chrysler Town & Country

2 Answers

Codes P1811 and P0742. car surges? Is it the selonoids?


P0742: Torque Converter Clutch Circuit Stuck On (transmission area)

P1811: Maximum Adapt and Long Shift 2.4L and 3.1L (transmission area)

You need to talk to a transmission specialist.

Oct 22, 2009 | 1999 Pontiac Bonneville

2 Answers

What does code P0753 Shift Solenoid mean?


P0753 means your powertrain computer detects a continuous open, short to ground or short to power in the circuit to your transmission's 1-2 shift solenoid. When the code is active, your transmission runs in a fail safe/limp home mode that only lets certain gear ratios function in the transmission.

The solenoid in your application looks like this
1edc2e6.jpg and it is located sometimes on the side of the transmission, but my guess is from the looks of it, it might be found inside the transmission, only accessible with the oil pan removed.
The problem might be the solenoid itself, or the wiring going to the solenoid from the computer that controls the transmission, or the computer itself.

Sep 09, 2009 | 2003 GMC Envoy

2 Answers

Reverse lights inoperable


I would go to local auto parts store and ask them the location by checking on there computer , For example autozone.

Apr 30, 2009 | 2000 Mercury Mountaineer

Not finding what you are looking for?
1995 Chevrolet Astro Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...