Question about 1994 BMW 3 Series

1 Answer

I cant get fuel through the injectors

I converted a 318 to a 325i and now that i put that in i cant get fuel to run through the car neither the fuel pump or injectors work but there is power through the car and if i put starter fluid in ther it will start so it has spark

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 909 Answers

I am not 100% sure but I think the fuel pump is at a higher pressure for the 325i. change the pump for a 325 and this may solve the problem

Posted on Sep 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1991grard am 2.3 l dohc it runs a little


The cat is working overtime. There is a sensor in the exhaust just down from the manifold. This measure exhaust condition. Have this checked. Until this is functioning properly it won't tell the fuel management what to do. I don't know if this will fix the misfire or not.

Oct 09, 2014 | Cars & Trucks

1 Answer

What are codes p1401 p0302 p0305 p1409 p0301


P1401 Differential Press Feedback EGR Circuit High Input
Your EGR port is plugged. Replace your EGR valve, and clean the ports
A code P0302 may mean that one or more of the following has happened:
  • Faulty spark plug or wire
  • Faulty coil (pack)
  • Faulty oxygen sensor(s)
  • Faulty fuel injector
  • Burned exhaust valve
  • Faulty catalytic converter(s)
  • Running out of fuel
  • Poor compression
  • Defective computer
  • A code P0305 may mean that one or more of the following has happened:
    • Faulty spark plug or wire
    • Faulty coil (pack)
    • Faulty oxygen sensor(s)
    • Faulty fuel injector
    • Burned exhaust valve
    • Faulty catalytic converter(s)
    • Running out of fuel
    • Poor compression
    • Defective computer
    • A code P0301 may mean that one or more of the following has happened:
      • Faulty spark plug or wire
      • Faulty coil (pack)
      • Faulty oxygen sensor(s)
      • Faulty fuel injector
      • Burned exhaust valve
      • Faulty catalytic converter(s)
      • Running out of fuel
      • Poor compression
      • Defective computer
      • A code P0302 may mean that one or more of the following has happened:
        • Faulty spark plug or wire
        • Faulty coil (pack)
        • Faulty oxygen sensor(s)
        • Faulty fuel injector
        • Burned exhaust valve
        • Faulty catalytic converter(s)
        • Running out of fuel
        • Poor compression
        • Defective computer
        • p1409
        • EGR Vacuum System Leak - Read Our Article on EGR Valve Codes For Help With This Oldsmobile Check Engine Light Code

Sep 25, 2014 | Cars & Trucks

2 Answers

2001 Caravan has red hot catalytic converter and #4 misfire error code.


Engine is way too rich. You will burn that car up. Unburned fuel is getting into the CAT and igniting. Check the injectors.

May 02, 2014 | 2001 Dodge Caravan

1 Answer

Car will start and run, then when I shut it off it wont start back up after sitting for a half hr of so


Check the catalytic converter it is probably plugged and not allowing fuel into the cyl. due to putting back pressure on the engine. If possible pull the 02 sensor out of the exhaust ahead of the catalytic converter and if it is plugged you should have the car to run. It will run rough but if it starts it is the problem.

May 28, 2017 | 1989 Chevrolet Celebrity

1 Answer

2004 dodge intrepid.2.7 engine. #1 misfire.coil good.plug good. have not done a compression test yet. ( will soon) I cant get to the injector.how can i get i test the injector?I have a scan tool which...


Hi, if the injector is not on the data list of the scan result then you have no reason to try and test the injector which can be located with the help o the car user manual...
The cause of misfiring #1 cylinder may mean that one or more of the following has happened:
  • Faulty spark plug or wire
  • Faulty coil (pack)
  • Faulty oxygen sensor(s)
  • Faulty fuel injector
  • Burned exhaust valve
  • Faulty catalytic converter(s)
  • Running out of fuel
  • Poor compression
  • Defective computer

If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.
If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.

I will also strongly suggest you carry out the compression test........

Jan 30, 2011 | 2004 Dodge Intrepid

1 Answer

Car runs fine at idle when givin gas it breaks up bad and the cat. converter turns red replaced the cat. put in new plugs and changed cam sensors car still does the same thing but gives no code


Catalytic Converters run very hot only when too much fuel used.

Find the cause of overly rich fuel condition. Over fueling will also cause running problems you are experiencing.

You need to check the Short Term Fuel Trim with a scanner. If higher than -12% you have an injector staying open too long or too high fuel pressure.

This is the corrective strategy the ECU uses to trim the fuel to lambda. ie: 14 to 1.C/0%

If it is too lean, it would read + instead of - .

Jan 12, 2011 | 2000 Lexus ES 300

1 Answer

1998 nissian altima engine floods at random


gosh, nissan spent 6 million dollars replacing faulty/leaking fuel injectors around that time ...maybe its worth a trip down to the dealer and do a campaign/recall search on your car...might be a car that was covered under that campaign and you might get injectors covered

Jun 23, 2009 | 1998 Nissan Altima

1 Answer

Starting


what do you mean "no fire on 1 side of injectors??" 1 injector no firing?? or what?? was the engine that you put in there used?? from junk yard?? If so, put the injectors back from your engine onto the engine you just put in there.

Aug 10, 2008 | 2002 Nissan Altima

Not finding what you are looking for?
1994 BMW 3 Series Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...