Question about 1993 Geo Tracker

Open Question

No power to starter. - 1993 Geo Tracker

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My starter will not engage.on my 1992 Honda accord lx wagon.


Standard tranny?,Auto tranny? Possible starter.. No power to starter..Neutral safety switch... Clutch pedal switch. Test starter signal wire power with test light at the starter to illiminate the above. If power available at this wire when key is held in the crank position, the above can be illiminated and a starter is most likely the problem

Dec 26, 2015 | Honda Cars & Trucks

1 Answer

Installed new starter. Has power. Turn key and it won't start and lose power. If I remove & reinstall battery cable the power is back but it starter still won't work


stock engine?
i did not decode that, at all.
has power? (what 12vdc power or engine power)
turn key it wont start but does it crank.??????? fast..
and lose power, what power is lost 12vdc power or engine runs but lost power?
the power is back what power? name something, specific,
like 12vdc power, starter power, engine power.
the starter wont work, i take that its silent?
or
starter spins but engine dont?
or starter clicks
or starter, is weak
or ???? try to be clear,

no engine stated.
no transmission.

if stick shift the clutch switch must work or the starter will be dead.
does that help
ever hot wire a starter, see this.
http://www.fixkick.com/nocrank.html

if engine will not crank, say that.
then say sounds. it makes if any.

Mar 15, 2015 | 1988 Suzuki Samurai

1 Answer

No power to starter starter is good


Confirm power is availible at starter main power supply, step one , using mutl meter check for 12 volts at battery positive terminal , 2, check main voltage supply lead to starter from battery pos post , 12 volts present? yer check voltage supply lead from battery pos post to altenater , then to starter , 12 volts present, yes , check small wire to starter at starter for switched 12 volts present yes change stater after confirming suitable ground, no, trouble shoot ignition / starter switch in colume

Mar 08, 2013 | 1999 Land Rover Range Rover

1 Answer

05 300 no power to starter


It can be faulty starter or there is loose connection from battery to starter.The starter assembly gets power from battery.Check voltages at starter wires and see if you are getting 12 volts or not.If not then its no power issue due to low battery volt or no connection between battery to starter.

------------
To solve these problem,i suggest you to refer these direct help links:-----
Click the link below :------
-----------
How to test starter solenoid? http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html -------------------- How to test cars starter? http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html
------------ How to replace starter in car? http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-starter-in-car.html

------------

These will help.
Thanks.

Nov 23, 2012 | Chrysler Cars & Trucks

1 Answer

2003 dodge caravan 2.4 motor will not start has full power going to starter but not when you turn ignition there is no power at small wire at starter


before i can go any further i have seen bad starter kill power to small wire, does not sound correct i know but it happens, remove the small wire from the starter and test it for power with key in the crank position.

if there is power at small wire when removed from starter then starter is bad. let me know the out come. good day

Oct 06, 2012 | 2003 Dodge Caravan

1 Answer

Changed starter...new battery....lights and radio work nothing happens when turn the key.


Starter Fuse? Possible failed ignition switch. Loose Cables on battery or starter. Starter not grounding properly. Bad starter Relay? Use Voltmeter check voltage going to main starter wire while someone cranks the motor if not power check power to starter relay while cranking if no power suspect ignition switch.

Sep 06, 2010 | 2001 Chevrolet Venture

1 Answer

My chrysler lhs 1995 will not start I have power fron the battery but am getting nothing other than dash lights and door dinging


The first thing to do is make sure the battery is fully charged, then test for power at the starter, use a testlight to check for power at starter, the big cable at starter should have power at all times then the small wire should have power when the key is held in the crank postion if theres power at starter then replace the starter.

Jul 20, 2010 | 1995 Chrysler LHS

2 Answers

When I turn the key in the ignition the car won't start and the starter makes no sound. It has a new battery and a new alternator. What I can I do besides set it on fire?


You may have a bad starter, the best to determine this is by testing for power at the starter,also the battery is new but is it still good and fully charged, you may what to make sure battery is fully charged first, then test starter with a test light, there are two connection at starter, one is a battery cable this has power at all times then the small wire,this should have power when key is held in the crank postion,have someone hold the key while you test. if theres power at both connections then starter is bad, heres a diagram to show you where to test starter.5eb28af.jpg

Jul 02, 2010 | 1992 Mercury Grand Marquis

1 Answer

I replaced the starter solenoid but it will still not start what is your suggestion


First test for power at starter,if your getting power to starter then starter is bad, also check the batt cable going to starter at starter for corrsion at terminal,if that cable has power and the small wire gets power when key in the crank spot then starter is no good,

Jun 17, 2010 | 1999 Ford Expedition

1 Answer

Hi i have a vw bora which doesnt start but has ignition lights, when key is turned lights dont fade and there is no click from starter motor


check connections on starter , the small feed should get power when you turn key to start/crank position, if no power to that check the outputs on the back of the switch /ignition barrel,
if power to starter, then check power to back off starter on large cable (goes direct to battery) if power to both, starter u/s
if power at switch but not at small power feed at starter, relay/fuse fault, or if fitted cut out switch

Dec 06, 2009 | 1999 Volkswagen Passat

Not finding what you are looking for?
1993 Geo Tracker Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...