Question about 1994 Toyota Pickup

2 Answers

Clutch goes in and out with very little give.... when i put the clutch in, and try to start, my truck moves while turning over the engine.. put in new slave cylinder, but still doing it.... try a new master cylinder?? did bleed out and still doesnt feel right....

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Toyota Expert
  • 178 Answers

On my '87 the leak was at the master cylinder but I couldn't find it until i pulled the rubber boot over the rod between the pedal and the master cylinder. The leaking fluid was being kept there by the boot. Of course make sure you bled the system completely when you replaced the slave cylinder.

Posted on Jun 03, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 247 Answers

Yes change the master,follow the lines make sure there isnt anything else in the system,sometines a check valve or somethin

Posted on Sep 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Honda Civic manual trans will not shift into gears. Car starts, push in clutch and it goes to the floor, release clutch and comes back up. Unable to put into gears. Brake fluid and clutch fluid seem...


Eric, how are you confirming whether or not the car goes into gear if you shift gears without the engine running? One way would be to put it in 1st and see if you can push the car. If you can't, it is in gear.

Another option is to roll the car slightly forward or backward (engine off) while trying to put the car in gear. Once it is in gear, then the car shouldn't move any further. However, if it goes into gear, DO NOT start the car without taking it back out of gear.

The clutch is much more likely to be the problem than the transmission.

If the clutch fluid ever ran dry, then the clutch hydraulics will need to be bled of air. Otherwise, the problem could be the clutch master cylinder, slave cylinder or throwout bearing. Since you didn't report the clutch slipping (e.g. engine revving without accelerating when in gear) it is likely not the clutch disks themselves.

Jun 11, 2014 | Cars & Trucks

1 Answer

2001 ford taurus runs good but will not move when put into gear.


sounds like you have a manual transmission. ?
Worn Clutch plates will give these symptoms
The clutch plates rub together and provide connection between the gear box and the drive shaft if not worn.
Also check the cable for the clutch is not loose and needs a surclip to hold it in at the firewall.
Check if Hydraulic Clutch that there is adequate clutch fluid if low might have leaking clutch master cyclinder

I have experienced this in a car I owned.
Not a lot of fun . Resulted in needing a Tow to repair garage and new clutch was AUD $1200 a couple of years ago.

May 07, 2017 | 2001 Ford Taurus

1 Answer

How can I bypass the starter in my car(manual trans) so it will start? I had the battery checked and it's fine.


  • If the engine cranks ("rrr-rrr-rrr") when you turn the key, then the problem isn't the starter or the battery.Plan to have at least one person sitting in the driver's seat and one or two persons pushing.Turn off all accessories (radio, wipers, lamps).Turn the key to the "on" position.Depress the clutch pedal with your foot.Put the transmission in first or second gear.Release the hand brake and the foot brake.Note that the people pushing need to get the car rolling as fast as they can. This works best down a hill or an incline.Release the clutch pedal while giving the engine a little gas with the gas pedal once the car is moving about as fast as you can run. The engine should start

  • Jan 12, 2011 | 2004 Acura TL

    1 Answer

    Hi, problem is that i face no engine start although the ignition goes on, and when i put the car on neutral it also goes off and engine goes off, the car is hyuondai accent 1997 hutchback,manual gear 1.5 l...


    Hard to tell, I dont fully understand what you have written as your problem. i.e. no engine start or the car will not move when the engine is on and you put it in gear and release the clutch

    Nov 15, 2010 | 1997 Hyundai Accent

    2 Answers

    Is clutch adjustable? Engine revs,but barely moves


    it's not if you have hydraulic system.
    check to see if the clutch pedal is firm and has pressure
    start your engine, depress the clutch pedal and put it in gear
    if it goes in gear easily and the car won't move then you need clutch

    Apr 21, 2010 | 1996 Ford Explorer

    1 Answer

    When i turn the key forward the engine wants to start but doesnt just makes the roaring noise and doesnt start


    It could be the starter, is it high pitch screeching, metal against metal, sound? Or more of whine? If it's metal against metal, the teeth on the flywheel ring gear might be damaged. If it's a high whine you are probably hearing the electric motor part of the stater and the "starter drive" is bad. The stater drive is part of the starter, it's the gear that engages with the flywheel gear. It is a one way clutch, it is supposed to hold when the starter is turning the engine. But, freewheel when the engine starts so it doesn't over rev the starter motor. When the drive goes bad it freewheels both ways. If you think the flywheel teeth are damaged you could try turning the engine by hand a little, WITH THE KEY OFF! Sometimes you can put a wrench on the alternator pulley nut and turn the engine a little. This will move the damaged teeth away from the starter and it might work now. Good luck.

    Mar 12, 2010 | 1991 Chevrolet S-10 Blazer

    2 Answers

    2006 4cyl manual 5 speed transmission 30K miles, light use with no problems. Will not go into any gear with engine running, goes smoothly into every gear with engine stopped. Clutch pedal feels fine and...


    Well, there is only one thing I can think of in your situation. Your pressure plates just simply are not creating enough pressure to allow the gears to engage. Either you have a defective clutch and it needs to be replaced, or possibly just needs a ton of adjustment. When you put it in 1st gear while engine is off, then start it and take off that works b/c there is enough pressure to keep the gears from starting to move when not already moving. However when they are already moving, there is just not enough pressure to stop them from turning, not even long enough to shift. Have you tried forcing it into 2,3, or 4 while driving without the clutch? As long as you achieve the correct RPM's your transmission should be able to do so.

    Feb 13, 2010 | 2006 Toyota Tacoma

    1 Answer

    Installed new battery, still won't start...won't even turn over. Tested the curcuits and there is current?????


    hi, if when you turn the key the engine dont even turn over then this is a good indication that the starter motor needs replacing.
    If the car has manual gear box you could try putting it in 2nd gear then get some one to help push the car so that the engine turns this way slightly then try starting this sometimes gets it started also you could try hitting the starter motor with a hammer this may also get it started.
    First check all fuses and replace any that are blown then try again if still no joy then check the wires going to the starter motor are secure if they are then its a good chance it needs replacing.

    If you have a manual box then you could put the car in 2nd gear with the igniton switched on then get someone to give you a good push or tow you down the road, keep the clutch pushed to the floor untill you have got moving quite quick then release the clutch this should then turn the engine over and fire the engine up then the car will be running, this in its self may free up the starter motor allowing it to start but be warned it will happen again so get it replaced sooner rather that later.

    Let me know how you get on or if you need further assistance ok.

    If you have an auto box then make sure the shifter is in right place move it all the way up and down a few times then give it another try as sometimes if its slightly out of line it wont engage the starter motor.

    Nov 11, 2009 | 1997 Nissan Sentra

    1 Answer

    I have a 98 Rodeo with a very loud fan noise. It starts loud when I start the vehicle and gets louder as I drive. The only time it goes quiet is when I sink the clutch. Do you know what could be causing...


    sounds like the clutch fan is no good under the hood,with the engine off try turning the fan on the front of the engine by hand,if it will not turn with little effort it might bre seized up,there should be a little resistance to it if the engine is warm,hope this helps

    Sep 05, 2009 | 1998 Isuzu Rodeo

    2 Answers

    KEY WONT TURN.


    have tried to steer it a little while you turning the key? because some the steering lock was stuck.

    Jun 02, 2009 | 1997 Hyundai Elantra

    Not finding what you are looking for?
    1994 Toyota Pickup Logo

    107 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8560 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...