Question about 1996 Chevrolet K1500

1 Answer

Won't start cold, what should the fuel pressure be and where to check it

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

There is a port on the drivers side, on the fuel rail, you will need a guage and hose to check it. it needs 58psi to run, 55 psi is too low.

Posted on Sep 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 chevy k1500 won,t start cold starting fluid will start truck


I would check the fuel pump relay first. You should have some fuel pressure in the lines when you turn the key on. The relay is powered for 3 seconds to boost pressure until the engine starts.
The relay may not be working or the check valve in the pump may be letting fuel back into the tank which would cause the pressure to drop to zero when the engine is off. You should have at least 15psi with a TBI system and 35psi with MFI.

Sep 03, 2012 | 1993 GMC Sierra K1500

1 Answer

Won`t start when cold


No such thing on your car.
The temp sensor tells the computer what the engine coolant temp is.
If it were faulty you would get a check engine light.
I would have the fuel pressure checked before and after you crank the engine. The pump relay provides power to the pump when you turn the key on to recover some of the lost fuel pressure after the car sits. The one way valve in the pump is supposed to prevent the pressure from dropping.
If the fuel pressure drops to zero it could take some time to crank the engine enough to get it back up.

Aug 17, 2012 | Lincoln LS Cars & Trucks

1 Answer

Runs fine when cold, not when warm though


The next time it won't start check the fuel pressure you should have 48-55 psi with key on and engine off.

Jan 06, 2012 | 1997 Buick LeSabre

1 Answer

REplaced fuel pump still won,t start when its cold it starts right up when its hot the only way it starts when cold is relieve pressure from line 1997 chevey pu . 305 .


Check your fuel pump relay Alot of chevy systems back up the fuel pump power supply through the oil pressure sending unit . So even if the relay is NG the vehicle will still start and run because the oil pressure sending unit is feeding the pump . It also could be a combination of bolth a bad relay and the O P sending unit it needs to build up enough engine pressure to trip the switch inside the sender to send voltage to the fuel pump and it would do this much better if it was cold the oil is thicker

Feb 10, 2011 | Chevrolet 1500 Cars & Trucks

1 Answer

Started ran for awhile then died an wont start


Start with the simple and replace your fuel filter, a dirty filter can cause your engine from starting. At worst, your fuel pump has failed and will need to be replaced. Before replacing the fuel pump, inspect all the fuses and wire leads from the fuel pump harness. Note: that the ground wire is separately grounded at the frame, so inspect that for any damage due to corrosion.

You need 3 things.
Compression
Good hot blue spark to all plugs.
Good gasoline and proper fuel pressure. 63-64 lbs.
If you have all 3 then move on to injector pulse to all injectors. I think each injector is on a seperate driver on that one. Check for pulse to all of them.

You may be weak on fuel pressure, even a couple of lbs low on a cold start will cause a no start. Double check cold start cranking fuel pressure. If under 63-62 lbs you have problems. One test is to give it a squirt of carb cleaner not starting fluid. If it starts then you have a fuel pressure problem.
Run the full fuel pressure test, here is the guide lines on testing.
Hard to start cold.
Check cold start fuel pressure.
Check engine running fuel pressure.
Check engine running on the road fuel pressure.
Then shut it off and watch for fast leak down.
Pinch off at rubber part or block off return line and check full pressure. Later V6 and V8 gm engines should have 60-66 fuel pressure.
* Cold start should be 64-65 lbs of pressure. If you do not have full fuel pressure on a cold start the injectors will not squirt fuel.
* Engine running should be 60-66 lbs pressure depending on engine load.
* Full pressure with return pinched off should be 75-85 or more. and if it has a fast leak down after shut off you have a leak.

The 75-85 is only a check on the capable full pressure of fuel pump. If you can not find the rubber return line check full pressure by plugging return line or just or the true full pressure can be taken direct at the end fuel filter.

Mar 18, 2010 | 1999 GMC Sierra

1 Answer

Truck turning over but not catching


You need 3 things.
Compression
Good hot blue spark to all plugs.
Good gasoline and proper fuel pressure. 63-64 lbs.
If you have all 3 then move on to injector pulse to all injectors.
I think each injector is on a separate driver on that one.
Check for pulse to all of them.

You may be weak on fuel pressure . even a couple of lbs low on a cold start will cause a no start.
Double check cold start cranking fuel pressure. If under 63-62 lbs you have problems.
one test is to give it a squirt of carb cleaner not starting fluid. If it starts then you have a fuel pressure problem.
Run the full fuel pressure test and post back pressures.
Here is the guide lines on testing.
Hard to start cold.
Check cold start fuel pressure.
Check engine running fuel pressure.
Check engine running on the road fuel pressure.
Then shut it off and watch for fast leak down.
Pinch off at rubber part or block off return line and check full pressure.
Later V6 and V8 gm engines should have 60-66 fuel pressure.
Cold start should be 64-65 lbs of pressure.
If you do not have full fuel pressure on a cold start the injectors will not squirt fuel.
Do not leave home without it.
Engine running should be 60-66 lbs pressure depending on engine load.
Full pressure with return pinched off should be 75-85 or more.
And if it has a fast leak down after shut off you have a leak.

The 75-85 is only a check on the capable full pressure of fuel pump.
If you can not find the rubber return line check full pressure by plugging return line or just or the true full pressure can be taken direct at the end fuel filter.
What are the pressure readings that you have done.
What are your cold start pressure readings?
Post back what you have.

The other thing to is when was the last time the fuel filter was replaced? The fuel filter may have got to the end of it's like and may need to be replaced, the fuel filer should be replaced every 15,000 miles or once a year to ensure the fuel system is running 100%.

Good luck and keep me posted, be glad to help you get your blazer running again soon.

Jan 10, 2010 | 1997 Chevrolet Blazer

2 Answers

1997 chevy blazer getting fuel and spark but not starting, only backfiring through carb.


You need 3 things.
Compression
Good hot blue spark to all plugs.
Good gasoline and proper fuel pressure. 63-64 lbs.
If you have all 3 then move on to injector pulse to all injectors.
I think each injector is on a separate driver on that one.
Check for pulse to all of them.

You may be weak on fuel pressure . even a couple of lbs low on a cold start will cause a no start.
Double check cold start cranking fuel pressure. If under 63-62 lbs you have problems.
one test is to give it a squirt of carb cleaner not starting fluid. If it starts then you have a fuel pressure problem.
Run the full fuel pressure test and post back pressures.
Here is the guide lines on testing.
Hard to start cold.
Check cold start fuel pressure.
Check engine running fuel pressure.
Check engine running on the road fuel pressure.
Then shut it off and watch for fast leak down.
Pinch off at rubber part or block off return line and check full pressure.
Later V6 and V8 gm engines should have 60-66 fuel pressure.
Cold start should be 64-65 lbs of pressure.
If you do not have full fuel pressure on a cold start the injectors will not squirt fuel. Do not leave home without it.
Engine running should be 60-66 lbs pressure depending on engine load.
Full pressure with return pinched off should be 75-85 or more.
And if it has a fast leak down after shut off you have a leak.


The 75-85 is only a check on the capable full pressure of fuel pump.
If you can not find the rubber return line check full pressure by plugging return line or just or the true full pressure can be taken direct at the end fuel filter.
What are the pressure readings that you have when done.
What are your cold start pressure readings?
Post back what you have. Good luck

Dec 24, 2009 | 1997 Chevrolet Blazer

1 Answer

Car wont start. Has spark, tried Carb Cleaner.


You may be weak on fuel pressure . even a couple of lbs low on a cold start will cause a no start.
Double check cold start cranking fuel pressure. If under 63-62 lbs you have problems.
one test is to give it a squirt of carb cleaner not starting fluid. If it starts then you have a fuel pressure problem.
Run the full fuel pressure test and post back pressures.
Here is the guide lines on testing.
Hard to start cold.
Check cold start fuel pressure.
Check engine running fuel pressure.
Check engine running on the road fuel pressure.
Then shut it off and watch for fast leak down.
Pinch off at rubber part or block off return line and check full pressure.
Later V6 and V8 gm engines should have 60-66 fuel pressure.
Cold start should be 64-65 lbs of pressure.
If you do not have full fuel pressure on a cold start the injectors will not squirt fuel.
Do not leave home without it.
Engine running should be 60-66 lbs pressure depending on engine load.
Full pressure with return pinched off should be 75-85 or more.
And if it has a fast leak down after shut off you have a leak.

The 75-85 is only a check on the capable full pressure of fuel pump.
If you can not find the rubber return line check full pressure by plugging return line or just or the true full pressure can be taken direct at the end fuel filter.
What are the pressure readings that you have done.
What are your cold start pressure readings?
Post back what you have. Good Luck

Dec 24, 2009 | 2002 Chevrolet Blazer

2 Answers

On cold mornings, will not start and just "turn over" replace fuel pump and complete tune up ..still the same problem


You may be weak on fuel pressure . even a couple of lbs low on a cold start will cause a no start.
Double check cold start cranking fuel pressure. If under 63-62 lbs you have problems.
one test is to give it a squirt of carb cleaner not starting fluid. If it starts then you have a fuel pressure problem.
Run the full fuel pressure test and post back pressures.
Here is the guide lines on testing.
Hard to start cold.
Check cold start fuel pressure.
Check engine running fuel pressure.
Check engine running on the road fuel pressure.
Then shut it off and watch for fast leak down.
Pinch off at rubber part or block off return line and check full pressure.
Later V6 and V8 gm engines should have 60-66 fuel pressure.
Cold start should be 64-65 lbs of pressure.
If you do not have full fuel pressure on a cold start the injectors will not squirt fuel.
Do not leave home without it.
Engine running should be 60-66 lbs pressure depending on engine load.
Full pressure with return pinched off should be 75-85 or more.
And if it has a fast leak down after shut off you have a leak.
Post back fuel pressure readings.

The 75-85 is only a check on the capable full pressure of fuel pump.
If you can not find the rubber return line check full pressure by plugging return line or just or the true full pressure can be taken direct at the end fuel filter.

What are the pressure readings that you have done. Good luck and hope the fuel pump is not a bad one you put in there, it's know to happen.

Dec 23, 2009 | 2002 Chevrolet Blazer

Not finding what you are looking for?
1996 Chevrolet K1500 Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...