Question about 1992 Buick Regal

2 Answers

What tools do i need to change break pads - 1992 Buick Regal

Posted by on

Ad

2 Answers

I assume you may have never done this before. Not on this veh. If you have, you already have the tools. how are you going to push the caliper pistons in to make room for the new thicker pads. What about cleaning of all the hub and pad slide rust. Lubing the right parts with the right lube. Rotors;new or have then turned. Work with us here We need to know you skills to be able to help.

Posted on Sep 26, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,068 Answers

Lug wrench to take wheel off , 3/8 allen head socket to remove the caliper slide bolts and a c-clamp vise grip or just a reg. c-clamp to compress the caliper piston , a small pry bar or large flat head screw driver to help get th caliper of the bracket once unbolted and a hammer never herts to have around for good measure! let me know if you need to know anything else. good luck

Posted on Sep 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace the break pads on my 1996 s10 chevy blazer?


Go to You Tube Video & watch how to do brake work

There is a lot more to do than changing brake pads only

Your best to get a friend or someone for a mentor to show
you how to start learning about vehicle maintenance

Mar 11, 2014 | 1996 Chevrolet Blazer

2 Answers

Replace rear ABS BRAKE PADS


with out the,make,modle,year,weather its disk or drum breaks without that info its hard to tell you

Feb 21, 2013 | Cars & Trucks

1 Answer

How to fix my front breaks?


Here watch this video

http://www.youtube.com/watch?v=kt2fvHlzv-4

Make sure you replace both your rotors & pads. Don't just replace one side.

Feb 07, 2012 | 1987 Buick Electra

1 Answer

What tools do i need to change rear brake pads and rotor on a 2008 kia optima


You will need the following to do a break job

Repair manual
Jack
Jack stands
Basic metric socket set 3/8" drive
Caliper spreader or C-clamp
Basic hand tools

Dec 13, 2010 | 2008 Kia Optima

2 Answers

Change rear break pads on 2000 Buick. Cannot compress break cylinder in order to install new pads using C clamp and bleeding off break fluid.


There's a special tool required to compress the rear caliper pistons. You may want to rent the tool. If you look at the piston you'll see one or two notches. The special tool has nipples to fit these notches. The caliper piston will have to be compressed with the tool and the notches will have to be placed in the o'clock and 6 o'clock for the brake pads to slide over the rotor. If you rent the special tool have the renter show you how to use it.

Sep 11, 2010 | 2000 Buick LeSabre

1 Answer

Change break pads


for front pads jack and support car remove wheels remove bolts holding calliper [2]remove spring clip pull calliper off remove pads clean housing fit outer pad slowley push calliper piston in using large grips fit inner pad to piston refitcalliper fit bolts refit spring clip can be awkward pump brake pedal until firm check fluid level rear ones are the same but special tool needed to wind calliper pistons back in note make sure brake discs are in good condition first

Dec 30, 2009 | 2000 Volvo S40

1 Answer

How do i change the front breaks, do i need special tools or something?


on any toyota trucks like yours you do not need to take calipers out, just insert a screwdriver or pry bar agains the pads and calipers. but do it only one side at a time

Apr 28, 2009 | 2004 Toyota 4Runner

1 Answer

I need to change my rear break pads and also my emergency brake will not dissengage once put on. How do i fix both?


My hyundai had the emergency brake bracket (mounted to the back of the caliper) rust solid. I used rust eater to get it to slightly break loose. I eventually had to replace both calipers. It is a very consistant problem. My new ones need alot of attention now as well I covered them in caliper paint to help with the rusting. The pads are very simple replacement 2 bolts on the back of the caliper. Remove the pads then screw back in the piston with a import tool from any auto parts store put pads back in, put back on the caliper.

Dec 15, 2008 | Hyundai Motor 2002 Elantra

1 Answer

Changing your read break pads and rotors


before attemping to rise vehicle check for air bag shut off air bag.there are lift point on the pinch wells where you can rise your vehicle. no special tools needed if break pads have sensors you must reset indicator light.

Jun 09, 2008 | 2003 Lincoln Navigator

Not finding what you are looking for?
1992 Buick Regal Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...