Question about 1991 Dodge Stealth

1 Answer

Set spes for timing - 1991 Dodge Stealth

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Dodge Master
  • 1,757 Answers

Sorry for the delay.
I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt/MARK(S) Diagrams that you will need, complete with Instructional and Directional Diagrams.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at!

Posted on Mar 28, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2003 1.7 Honda rod and main tourge spes

Your autoparts store should have a repair manual. or try if they have it, or try

Apr 27, 2015 | Honda Cars & Trucks

1 Answer

Keep timing from changing and keep it set to where it is set?

sounds like you arnt tightening everything properly as when timing is set it shouldnt move

Aug 17, 2012 | 1999 Mercury Mystique

1 Answer

My car is shacking side to side

check to make sure the tires are balanced and lug nuts are tightened to spes.

May 15, 2010 | 2004 Acura TSX

2 Answers

What is engine blueprinting?what is needed to bring out more power to the engine? For example, could mere balancing of like let's a pulley add some power to the engine? Thanks.

Blueprinting is a very exhaustive and extensive process of rebuilding the engine. When the engine is designed, there are specifications for every dimension of every engine part. Since the parts are mass-produced, there is no way that they can be made exactly to spec, so there's a tolerance allowed on the parts (for example, the weight of a piston would be specified as X number of ounces, plus or minus 10%). Same for connecting rods, wrist pins, the inside diameter of each runner in the manifolds, weights and dimensions of valves, etc.

When an engine shop blueprints an engine, it means they build it to the exact specification for each part and clearance in the engine. They may order 50 pistons for a V6 engine, and will measure all of them for all size and weight dimensions, and won't stop until they get six that match exactly. They'll then do the same for the six rods, six wristpins, the valves, crankshaft, etc. They'll take the intake manifold and will usually bore it out (or extrude-hone it, which involves flowing a high-temperature, abrasive clay through it at high speed/pressure to polish and enlarge the volume for better airflow). Ditto that for the exhaust manifolds. They'll do a full hot-tank treatment on the block, metallax the block (alternate heating and cooling of the block to make the crystalline structure of the engine block metal more regular, and thus stronger), cross-hatch the cylinders for oil retention on the walls (better lubrication and less friction as the pistons move), order cams with an optimum grind for valve lift and duration (this determines the airflow characteristics of the engine, where it'll make peak power and torque, etc), they'll knife-edge, balance, micropolish, and shotpeen the crank for less turbulence in the oil pan and lighter rotating weight (so it doesn't drain as much power), and they'll assemble it all to exacting fit and torque specs.

The end result is that you can gain 20% or more output from the engine, or even more still if they do porting/polishing on the components, extrude-honing, etc. With that stuff and custom-spec cams, the output could go up 30-40% even. It's a big power gain, but it comes at a big cost (as I'm sure you can tell). It's only really worth it on a race engine. Anyone who says they can blueprint a motor for a grand or less is full of it. You'd honestly be looking at $2000 or more easily if you only rebuilt it to stock spec with stock parts. Using aftermarket, high-performance parts, custom cams, extrude-honing, porting and polishing, etc, can easily kick the price up to $5000 at the least, and depending on the components you buy, $10-20,000 is very easy to ring up. It's not for the faint of heart. But it may be all the difference in racing, especially in an SCCA class like Spec-Miata racing, where engines have to be unmodified (as in, using only OEM parts). There's no rule against blueprinting as long as the parts are all available at the dealership parts counter. It says you have to use stock parts, but it doesn't forbid you from using the best possible combination of stock parts possible.

Nov 17, 2009 | 2004 Pontiac GTO

1 Answer

Trying to set time after battery died, not shown in manuel correctly

Usually on older AC-Delco/Remy Radio, press the "set" button and it will take you back to the radio station frequency, then push the left knob inward, then it will take you back to the time again. Before the "set" mode ceases, use the seek and scan buttons to change the minute and hour for the time, until you get to the time you want.

Other models will have the "set" button being a small almost hidden button, you can use a paper clip pin end to depress. Which will initiate the "set" mode, then you can push in the left or right knobs and the time mode will come on. Then using seek rocker switch or the seek and scan buttons the time minutes and hours will start to change.

The last type is where you have to either hold down the set button then use the seek and scan buttons or you have to hold down the set button for about 4 seconds then the clock will go into a blinking or set display mode, for which you can use either the knobs or the seek and scan buttons to produce minute and hour change display on your clock.

Try these methods. I know on older GM vehicles with AC Delco/Remy type radios/stereos, usually there is a "set" button for setting your favorite radio stations to instant numbered buttons, usually up to four or five of them. This same "set" button can be used to set the time. But when you hit the "set" button it will take you to the radio station frequency, not the time. That is when you press in the left knob or sometimes the right knob, and the time display will come on, while it is still in the set mode. Then you can press on the seek and scan buttons, one of them will change your minutes the other one will change your hours, for your clock display time. When you reach the correct time you desire, then hit the "set" button again, which will turn off the set mode. Your clock should start working normally, starting from the time you've set

Aug 23, 2009 | 2004 Pontiac Grand Am

1 Answer

Hyundai Lantra 19999 Timing Mark

are you setting the timing belt or just setting the timing with a light ? if you are setting the timing it should be set at about 10 before top dead center or maybe would run a little better at 12 or so thanks jerry holler if you have more .

Feb 07, 2009 | 1996 Hyundai Sonata

Not finding what you are looking for?
1991 Dodge Stealth Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides