Question about 2001 Volkswagen Cabrio

Open Question

Lock malfunctioning, making the alarm go off.How

Door lock malfunctioning, making the alarm go off.How do i disconnect the alarm? where is it?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my doge caravan doors lock when u start to warm it up as soon as you close the door you get locked out. Or when u have it started as soon as driver door closes the whole van locks?


You must have a "After Market Alarm" or something similar. The factory Auto door lock system doesn't lock the doors until the vehicle reaches 18 mph approximately.
So what I am saying is the Add-On Door Lock/Alarm System is malfunctioning - however some of those aftermarket systems can be programmed to lock doors with the engine running and Driver's door closed (they assume you will be sitting in the driver's seat at that time) It varies depending on which manufacturer built the system. I have seen on some of those systems they provide a small loopwire on the Module that can be cut to disable the Auto Door Lock feature - you might need the install manual to know which one.

Feb 20, 2015 | Cars & Trucks

1 Answer

My 98 kia sportage wont start


It sounds like the key sensor in the drivers door is malfunctioning, the drivers door is the only door that can enable/disable the alarm, if you try to unlock any of the others it will trigger the alarm.

Sometimes with my Kia I have to (without opening the door), cycle lock and unlock several times before the alarm is disarmed.

Have you tried this is succession, with all the doors locked:-

put the key in the drivers door, turn to lock and then to unlock, the alarm should disarm.

Also, if any of the door locks are jammed, the alarm will still activate when you try to unlock the drivers door.

If that fails and the alarm still activates, then it's a problem with the key sensor in the door.

Mar 30, 2014 | 1998 Kia Sportage

1 Answer

2000 chevy 1500 no start, no crank, security problem


The truck has a feature, where you turn the key in door lock , the alarm should stop going off. there is a small switch on back of the lock cylinder. it may have popped off and is in lock position, but you cant turn it back to on position, because it popped off from the back of the lock. remove the door panel and look inside of the door where the lock is. make sure, that the switch is attached firmly to the back of the lock cylinder. start there.

Jul 04, 2013 | Cars & Trucks

2 Answers

Problem with alarm not locking drivers door


check the wiring harness going to the door

May 05, 2010 | 2006 Audi A4

1 Answer

Disconnecting the alarm, drivers door lock does not work, unable to turn key.


Disconnecting the Imobilizer will not unlock your Lock/Key assembly. You should be able to manually unlock your car with your key. The Imo will only activate when it's been breached illegally but it doesn't prevent you from opening the lock manually. Your lock assembly maybe malfunctioning and regardless what state it's in the IMO doesn't control it's mechanical movement.

Feb 28, 2010 | Volkswagen Golf Cars & Trucks

1 Answer

Alarm and door lock malfunction 1996 Camaro z28 LT1


Hey just wondering if you ever go this problem fixed. I am having the exact same issue. Thanks

Jul 03, 2009 | 1996 Chevrolet Camaro

1 Answer

Vw jetta 1996 GL.my door lock came off from door handle when ...


door locks are operated by a round solonoid make sure it is connected with a wire .. this is what locks and unlocks your doors when you push the button .. thanks Jerry holler if you need more.

Feb 05, 2009 | 1996 Volkswagen Jetta

1 Answer

The alarm form my car is ringing with no reason at all....it is very anoiyng for everybody.would u know why? how can i fix this? i can/t even disconected coz i dont know where is it....i just disconect the...


Mine is the same, so I lock mine manually, using the rocker switch on the drivers door. Set all of the other switches to lock (use the power lock button) then open the drivers door to get out and before closing the door flick the rocker switch on the door to lock and shut the door. This makes sure the doors are locked but disables the alarm. You will notice that the red flashing light on the dash which lets you know that the alarm is engaged will not be flashing, the alarm is disengaged. Much easier than disconnecting the battery...
Read the manual to identify the power lock button from the manual door lock switch.

Nov 10, 2008 | 2006 Chrysler Neon

Not finding what you are looking for?
2001 Volkswagen Cabrio Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...