Question about 1990 Jeep Wrangler

1 Answer

Suddenly I have almost no clutch free play left in my 1990 Jeep Wrangler. Goes almost to the floor now. Was working fine yesterday. What's going on?

Posted by on

  • Samuel Charles Spriggs May 11, 2010

    Most likely a failed clutch master or slave cylinder. Charlie

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 138 Answers

Sound like your clutch master cylinder has developed a internal leak or maybe even leaking out the back past the seals. Have you checked the brake fluid level in the clutch master cylinder resorvoir it may be low and you have air in the system. Either way you have a leak somwhere in the system and you need to determine where it is. Fill your resorvoir with approved fluid and while some one is pumping your clutch pedal see if you can see where the fluid is leaking from the jeep. Reair or replace as necessary.
good Luck

Posted on Sep 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After changing transmission and clutch in 91 Wrangler, clutch goes to floor. Tried bleeding line but didn't work.


The clutch should go to the floor =) But if it's not disengaging the clutch disk, there's definitely a problem between the pedal and the clutch disk. I'm guessing you have a hydraulic clutch?

Apr 19, 2012 | 1991 Jeep Wrangler

1 Answer

My 1993 jeep wrangler clutch keeps giving out even after i bleed the line..any thoughts? it works fine for a little while then goes to the floor again


replace the CLUTCH MASTER and SLAVE assembly! Age of that classic jeep needs NEW CLUTCH MASTER and SLAVE! That part together w/ clutch slave should be change! Personally i have experience replacing the kit only, it didn't last longer than expected and even got me in trouble, and I spend like i bought a NEW one! So its up to you to decide? taaah!

Nov 10, 2010 | 1995 Jeep Wrangler

2 Answers

1989 jeep wrangler wont shift gear and clutch gone loose


Get the clutch slave cylinder and master cylinder looked at.One of the 2 has failed.If the pedal goes to the floor or is very loose,this is very likely the cause.Not an expensive fix.Hope this helps

Jan 10, 2010 | 1989 Jeep Wrangler

1 Answer

I have a 1989 jeep wrangler. yesterday, after the stick shift felt stiff to shift, the clutch felt suddenly loose. Today, the stick shift stopped moving completely while i was driving. Finally, I was able...


Sounds like you are having a clutch problem. The sudden looseness in the clutch pedal indicates a problem with either the hydralic system, (slave or master or line) leaking or clutch pressure plate going out. Check your clutch fluid resevoir first, if low look for a leak under the vehicle, have a friend push the clutch and get underneath to find leak.

Jan 10, 2010 | 1989 Jeep Wrangler

4 Answers

Is there a way to adjust a clutch on a 1990 jeep


On the clutch cable, you will see an adjustment nut, Turn right to tighten and left to loosen.

Aug 02, 2009 | 1990 Jeep Wrangler

2 Answers

The clutch in my 92 Jeep Wrangler suddenly stopped working.


pull the boot back on the master and see if it is wet do the same with the slave

Apr 25, 2009 | 1992 Jeep Wrangler

1 Answer

1994 Jeep Wriangler clutch pedal going to foor


Check the ear that connects to the rod that goes through the firewall to the clutch master cyl. likely it's broken.

Jan 28, 2009 | 1994 Jeep Wrangler

1 Answer

1990 jeep wrangler


YES BECAUSE YUOR CLUTCH IS HDRDRAULIC, SLACE IS INSIDE BELL HOUSING

Jan 02, 2009 | 1990 Jeep Wrangler

Not finding what you are looking for?
1990 Jeep Wrangler Logo

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...