Question about 2005 Chrysler Pacifica

1 Answer

2005 Chrysler Pacfica Headlight Having trouble replacing low beam. Cant disconnect from the lower clamp. Help!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,596 Answers

The Entire Assmbly must be Removed to Replace Bulb, Sounds Bizzarr But true

Posted on Sep 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1987 Chrysler Fifth Avenue, only one low beam headlight is on.


the light is out replace it the low side work when u have high beams on ththe short in the light is in the low beam .

Sep 09, 2012 | 1987 Chrysler Fifth Avenue

1 Answer

2005 chrysler sebring convertible~ low beams not working, but all other lights do~ checked fuses and they llok fine...any ideas?


, try using a voltmeter on the plug for the bad headlights Turn on the ignition, and turn the headlight switch. If the voltmeter shows no voltage, then either your switch or the wiring leading to the headlight has gone bad.If replacing your headlight switch does not solve the problem, then there is a break in the wiring leading to the headlight, and the wiring will need to be replaced. also check to see if you have a relay for the low beams in fuse and relay box, check this first !

Jan 24, 2012 | 2005 Chrysler Sebring Conv

2 Answers

How do i get to my low beams on my chrysler 2005 sebring sedan i got to the high beams perfect but the low beams right next to it has a metal barrier surrounding it which makes it impossible


Unfortunately, the answer I have is not a happy one =(. My wife has a 2005. In order to replace the bulb you will have to pull the Crutons (plastic push pins) that hold the front bumber cover on, remove the Headlight housing & replace the bulb that way. Shame on Chrysler for making it so difficult, in my opinion. But I hope this helps you to change the bulb =)

Aug 26, 2011 | 2004 Chrysler Sebring

2 Answers

2005 Ford Focus ZX3 SES, the blue high beam indicator in the dash comes on with low beams, and goes off with high beams. The indicator is on at the wrong time! I have tried the following: The turn signal...


It sounds like you are confused about how your headlamp system is supposed to work. The DRL does not run on the High beam circuit, it runs on the low beam circuit. The fog lamps are supposed operate with the park lamps and also with the low beams, not the high beams. From your description, I would say that your system is operating as designed and you are having trouble telling High from Low. (Don't feel bad, that is why high beam indicators were invented in the first place.)

May 08, 2011 | 2005 Ford Focus

2 Answers

How do I replace the headlight bulb on a 2005 Town Car?


1. Remove the three pin-type retainers, two screws and the radiator defector.
2. Remove the 4 bolts securing the headlamp assembly and remove headlamp assembly.
- Disconnect electrical connector
3. Remove the 3 hex-head bolts and 2 torx-head screws and remove headlamp protective cover.
4. *****Standard low-beam bulb*****
Disconnect the connector from the bulb and remove the low beam bulb.
5. *****HID low beam bulb*****
Release the spring tabs and remove the HID low beam bulb
Disconnect the connector from the bulb
6. *****High beam bulb*****
Disconnect the electrical connector and remove the high beam bulb.
Reverse order to install
dttech_6.gif
.
.

dttech_7.gif

Jan 27, 2011 | 2005 Lincoln Town Car

1 Answer

Is the low beam headlight bulb difficult to replace from under the hood on a2005 honda accord


I just replaced both low beam headlight bulbs on my 2005 Honda Accord. After reading the owner's manual and trying to remove the wheel well inserts (and breaking a couple of those clips in the process), I gave up on that approach and was able to change the passenger side and driver side low beam bulbs from the engine compartment under the hood. On the passenger side, fit your arm between the front of the car and the hose that is above the headlight. You should be able to reach the bulb, disconnect the electrical connection, turn the bulb 45 degrees counterclockwise to remove it, insert the new bulb turning it 45 degrees clockwise to secure it in the hole (be careful not to touch the bulb), and reconnect the electrical connection. I loosened the 3 screws that secure the bulb to make it easier to put in the new one, but that probably isn't necessary. My hand was scraped a bit doing this, but it was not too bad. On the driver side, remove the battery hold-down clamp (there is no need to disconnect the battery connections). Reach into the fender (shine a light there so you can see the bulb connection) and you should be able to reach the bulb and replace it similarly to the other bulb. You may have to move the battery slightly to get your arm in there. Replace the battery hold down clamp when you're done. I accidentally dropped the old bulb in the wheel well, but other than that it went pretty smoothly. Good luck.

Jan 03, 2010 | 2005 Honda Accord

1 Answer

Headlight low beans don't work. High beams do


check your fuse box on the inside is a diagram of all fuses check the one that says low beams could be blown

Dec 12, 2009 | 2005 Chrysler Sebring Conv

1 Answer

Passenger Low Beam Headlight needs replacement!!!


You could remove the air filter cover and then you will be able to reach the bulb.

Apr 12, 2009 | 2004 Chevrolet TrailBlazer

Not finding what you are looking for?
2005 Chrysler Pacifica Logo

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...