Question about 2003 Dodge Caravan
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
well first take off the door panel it shouldnt be hard remove plastic cover off door.Make sure your window is all the ways up before you remove the motor.you can hold it up with duct tape or anything similar.Then remove the screw that go to the regulator sometimes it has rivets wich have to be drilled off.The new regulator should come with screws if it has rivets if not u use the same old screws.Also unplug the harness of it . Install new one,screw it on and reverse the procedure.Any problems keep me posted
Posted on May 23, 2009
I can give you generic info on how door panels are fastened and removed. I hope this helps. The outer perimeter of the panel is held in place on the sides and bottom by push-in fasteners that match holes in the door frame. These fasteners have button heads that attach to the back side of the panel, and the have ribbed shafts which are pushed in to the door frame holes. There are screws and/or bolts that secure the door arm rest and door handle molding to the frame. In some designs the screw head are concealed by small buttons, or by a piece of molding plate that pops out.
First step is to locate and remove all these screws. Next step is to place a screw driver at the edge of the door panel, between the panel and door frame and pry the panel away from the frame. There is a trim tool that is made for this task (relatively inexpensive) that you can purchase at the local auto parts store. The sides and bottom of the panel are popped away from the frame. After sides and bottom are loose, the top is released by pushing up to release the upper window molding from the frame. Be careful of wiring on the back side of the panel (electric windows, locks, etc.) Unplug all electric before you remove the panel totally.
Those nylon fasteners tend to break when the panel is removed, but they are replaceable (again, at your auto store). Just take one with you to match it up.
I hope this helps you!
Posted on Jul 26, 2009
Tips for a great answer:
Jul 20, 2012 | 2003 Dodge Caravan
Jan 24, 2011 | 2003 Dodge Caravan
Oct 11, 2010 | 2000 Dodge Caravan
Oct 10, 2009 | 2003 Dodge Grand Caravan AWD
Sep 25, 2009 | 2005 Dodge Caravan
Jul 28, 2009 | 2003 Dodge Grand Caravan AWD
Apr 16, 2009 | Dodge Grand Caravan Cars & Trucks
426 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: