Question about 1994 Ford Ranger Supercab

1 Answer

1994ford ranger lights don't work when switch is engaged all the way. also brake lights won't work with out the headlights on. does anyone know what coould be causing this??

Posted by on

  • rdjj39 Sep 26, 2009

    we replaced the headlight switch and still had the same problem. as far as I know there has been no creative wiring. I was wondering if it might be a bad ground. once you ingage the light switch you have to push it back in a little then the ligts all work.

  • Tom Shanks
    Tom Shanks May 11, 2010

    defective head light switch. has anyone done some "creative" wiring on this truck?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 146 Answers

Try replacing brake light switch on the back of brake pedel and replacing light switch

Posted on Sep 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tailights not working


there should be a ground some were near the back of the truck for the taillights check all of the wiring in the back for the lights and see what you can find

Jan 18, 2014 | 1992 Ford Ranger

1 Answer

Brake light switch not engaging


Do you still have the old switch and are you sure that the hitch pin is in place holding the switch in the right position there might have been a nylon bushing on the brake pedal shaft that's missing if you press the pedal while looking at the switch and it partially moves this is the problem that switch is not to move and the rod should press in the switches plunger which activates the lights I'm going to try to find a photo watch for the next post

Apr 24, 2017 | 1994 Ford Ranger Supercab

2 Answers

1994 dodge dakota my headlights and tail lights and brake lights don't work my abs and parking brake lights are on my dash lights don't work either I replaced the headlight switch and still no


These are all different circuits. The brake lights are on a 10amp fuse - the headlights are on a 50amp fuse - and the parking and dash lights are on a 20amp fuse.
Do you have power going into the headlight switch and the brake light switch ?

Jan 29, 2013 | Cars & Trucks

1 Answer

Some dash lights on my 01 ranger don't work.the bulbs are good


Get an Auto Electrician to trace and fix the problem. There are partial contacts in the wiring system.

Dec 29, 2012 | Ford F-250 Cars & Trucks

1 Answer

98 Ranger Headlights Not Working


Check the bulbs, if OK replace switch.

May 17, 2017 | 1998 Ford Ranger SuperCab

1 Answer

Cadillac lights won't turn on


No relay that I know of.
On 1970s models the headlight switch had a circuit beaker built into the switch for the headlight circuit.
If you have power to the headlight switch and nothing coming out of the terminal for the headlights the circuit breaker may have died.
You would need to replace the switch.

Aug 18, 2012 | 1975 Cadillac DeVille

1 Answer

1994 gmc jimmy headlights wont turn on


go to an accredited auto electrician for electrical work
it may be a switch problem but I think that there is no power to the light relays ( switch or fuses)
if that model has a light control module , it could be that

Mar 31, 2017 | 1994 GMC Jimmy

1 Answer

My 96 ranger turn signals & hazards don't work. Brake lights, headlights, running lights work fine. I replaced the flasher relay, and still nothing. Does anyone know what else to try?


It Could Be The Flasher Switch Or Turn Signal Switch Now This May Not Be Whats Wrong with Yours Now My Ignition Switch came Apart on my car and i lost turn signals and E flashers i hope one of these will help

Aug 15, 2009 | 1996 Ford Ranger SuperCab

1 Answer

Headlights will not work but the running lights and tail lights work. We tried a new switch but did not fix problem?


it could be your parking brake switch when the parking brake switch is engaged the headlights will not come on but the running lights will

Oct 30, 2008 | 1999 Chevrolet Suburban

Not finding what you are looking for?
1994 Ford Ranger Supercab Logo

237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...