- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Aug 16, 2015 - Uploaded by World Mechanics
... Stratus / Chrysler Sebring / Pt Cruiser 2.4 Head gasket Install and torque specs We took this video to ... 2004 Chrysler PtCruiser head gasket
Step: 1 - Torque to 25 ft/lbs Steps: 2 - Torque to 50
ft/lbs Steps: 3 - Torque to 50 ft/lbs Steps: 4 - Turn 90 degreesRecheck
final torque in sequence
Caution:Engine uses torque to yield head bolts
(TTY) that permanently stretch during initial installation. New head bolts
must be used when cylinder headis replaced or re installed to obtain
proper torque specification.
take off old water pump. clean up area on the motor real good.do this by using a scrapper and cleaning slolvent. when thats all done put hi temp silicon on the block water pump and the put gasket on silicon. let dry for like five minutes. put in on torque bolts to specs.