Question about 1999 Dodge Durango

Open Question

Stalling My durango stalls and will not restart for 5 to 20 min. I changed the crank sensor, it was good for a day but now stalls more frequently.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

99 Dodge Durango 5.9l V8 turning over but not starting. Strong smell of gas from air intake. Plugs sound like sparking. Fluids good and clean air filter. Any ideas?


Cam Sensor Failure Causing no Start or Stalling : Dodge ...

repairpal.com > Problems > Dodge > Durango
Dodge Durango Cam Sensor Failure Causing no Start or Stalling. ... On the 4.7L V8engine, the Camshaft position sensor failure can cause the engine to crank but not start or it can ... On the 5.9L V8 engine, rerouting the ignition coil wire and spark plug wires can help solv. ... 1999 Dodge Durango ... Drove good till put gas.

Aug 05, 2015 | Dodge Cars & Trucks

1 Answer

Stalling and not restarting when warm, crank sensors were changed and it made no difference


You might try and remove the anti theft system. If that doesn't work try to disconnect the battery until the system resets itself. BTW howdoes it run? Is it in good shape otherewise?

Feb 19, 2014 | 1997 Chevrolet Lumina

1 Answer

2002 gmc 2500 panel van......engine stalls....code was to change cam sensor....vehicle is fine after sensor is changed however after driving for a few hours , problem of stalling returns,cam sensor has...


Have the crank sensor checked, some times a generic scan tool or code reader will pull a code but list cam sensor and then when code is read with a gm tool it reads crank sensor, can you give me the code #?
you may also have a wiring problem to cam sensor or faulty ecm or bcm. ( computer) engine control module) good day
but still have the crank tested ,good day

Sep 28, 2012 | Cars & Trucks

2 Answers

Unexpected stalling - have replaced pcm, wiring harness, part of the distributer, plugs, wires, o2 sensor....can't figure it out....have spent hundreds of dollars and still no solution.


Did you try replacing the crank sensor.There is a service bulletin for the crank sensor causing stalling on these models.Hope this helps.Good luck.

Apr 12, 2010 | 1999 Dodge Durango

2 Answers

I have a 1991 buick par avenue with 3800 engine. The car periodcally stalls while it is running. It is easily shifted into neutral and restarted, but can be dangerous at high speeds. So far the garage has...


the price for the ac service sounds steep. The Stalling can be caused by ac but I have not came across this at high speed. Did they replace the Crank sensor?? Or the ICM? These can cause these issues. The crank sensor more so than the ICM. The cam sensor usually does not cause a stalling that I have ever dealt with. they will cause some issues but not at high speeds.

Oct 16, 2009 | 1992 Buick Park Avenue

Not finding what you are looking for?
1999 Dodge Durango Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...